Volt Resistance 12V User manual

Instruction
Booklet
www.voltheat.com

Instruction Booklet
CONNECTING THE BATTERY HARNESS TO THE 12V
BATTERY ON YOUR MOTORCYCLE
Your motorcycle’s electrical system directly powers your 12v heated clothing.
The supplied battery harness connects to the 12v battery on your motorcycle.
You must rst attach your battery harness to the battery to use your heated
clothing unless you are using a separate 12v accessory outlet for power.
Locate your motorcycle’s battery.
Negative Terminal
a) Remove the bolt that holds the negative battery cable in place. The
negative terminal has a minus (-) on the battery next to the post.
b) Identify the negative wire of your battery harness. The negative wire does
not have an inline fuse.
Positive Terminal
a) Remove the bolt that holds the positive battery cable in place. The
positive terminal has a plus (+) on the battery next to the post.
Replace the positive bolt (+) and cable rst. At the end of your battery
harness is an o-ring connector, place bolt through the o-ring connector and
tighten.
Reconnect the negative bolt and cable next. At the end of your battery is an
o-ring connector, place the bolt through the o-ring connector and tighten.
Route the battery harness to the left side of your motorcycle. Make sure the
wires will not rub or be pinched between frame and seat.
1.
2.
3.
4.
5.
6.
www.voltheat.com
2

Instruction Booklet
www.voltheat.com 3
Let the battery harness plug hang a couple of inches below the seat on the
left side.
Use a tie-wrap or electrical tape to safely attach wire to the frame and other
points on the motorcycle to prevent the wire from shifting.
Double check that your battery terminal bolts and cabling are correct and
tight.
Your 12v heated clothing must always be used with a controller.
The single wire coming from the controller connects to the battery harness.
The dual wires from the controller connect to the 12v heated clothing.
To operate your controller press and hold the round power button and
select power setting:
Red = 100% | Yellow = 75% | Green = 50% | Flashing Green = 25%
If you have a problem, rst check all connections for tightness, and wires for
proper routing and insulation integrity, also check fuse in battery harness.
Other accessories use up the electrical power need to power your
heated clothing. Add up your power needs and subtract them from your
alternator’s peak power output (available from your manufacturer or
dealer). 12v Volt Gloves = 3 Amps | 12v Volt Jacket = 7 Amps
7.
8.
9.
1.
2.
3.
1.
2.
CONNECTING YOUR CONTROLLER TO THE
BATTERY HARNESS
POWER STATUS

Instruction Booklet
WARRANTY
Your Volt Heated product is warranted to be free from factory defect in
materials and workmanship for a period of (1) year from the date of purchase.
In the rare chance that you received a damaged or defective item, or stops
working, please contact us immediately through email: [e-mail] or
by calling 888.518.6871
H2C Brands LLC
888.518.6871
www.voltheat.com
If you made your purchase directly through www.voltheat.com and are
not 100% satised with your purchase, you can return your order to us for
a refund. All we ask is that you email us ([e-mail]) for a Return
Authorization number and include your original paperwork with your
shipment. Items sent back to us must be in the original packaging, and make
sure that the merchandise is in the same condition. Once your return is
received and inspected by us (usually within 72 hours of receipt), your refund
will be processed and a credit will be automatically applied to your credit
card. Please note that depending on your credit card company, it may take an
additional 2 - 10 business days after your credit is applied for it to post to your
account.