VonHaus 3515389 User manual

9AMP ELECTRIC
TACKER
3515389 - Instruction Manual

CONTENTS
Safety Instructions 1
Safety Instructions 2
Safety Instructions, Safety Symbols 3
Specification 4
Staple Specification/Inserting Staple Magazine 5
Inserting Nail Magazine 6

Switching On/Off/Operation 7
Impact Strength Adjustment 8
Clearing a Jam 9
Troubleshooting/Cleaning & Maintenance 10
Warranty 11

WARNING
Please read these instructions carefully and keep for future reference
1
GENERAL SAFETY INFORMATION.
WARNING! Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
Please retain all warnings and instructions
for future reference.
The term “power tool” in the warnings
refers to your mains-operated (corded)
power tools or battery-operated (cordless)
power tools.
INTENDED USE.
This 9A Electric Tacker is intended for
domestic use only and should not be used
for commercial or industrial purposes.
This tool is not intended for use by
persons with reduced physical, sensory or
mental capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instructions
concerning the use of the tools by a
person responsible for their safety.
Children should be supervised to ensure
they do not play with the tool.
WORK AREA SAFETY.
Keep your work area clean and well lit.
Cluttered or dark areas invite accidents.
Do not operate power tools in explosive
atmospheres such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
Keep bystanders, children and animals
away whilst operating a power tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY.
Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
Do not expose power tools to rain or wet
conditions. Water entering the power
tools will increase the risk of electric
shock.
BEFORE USE.
Stay alert, watch what you are doing, and
use common sense when operating a
power tool. Do not use power tools whilst
you are tired or under the influence of
drugs, alcohol or medication. A moment
of inattention while operating power tools
may result in serious personal injury.
Use personal protective equipment.
Always wear eye protection. Protective
equipment such as a dust mask, non-
skid safety shoes, hard hat, or hearing
protection used for appropriate
conditions will reduce the risk of personal
injury.
Always wear eye protection. Any power
tool can throw foreign objects into your
eyes and cause permanent eye damage.
Always wear safety goggles (not glasses)
that comply with ANSI safety standard
Z87.1. Every day glasses have only impact
resistant lenses. They are not safety
glasses.
WARNING! Wearing glasses or goggles
not in compliance with ANSI Z87.1 when
operating this tool could cause serious
injury.
Prevent unintentional starting. Ensure
the switch is in the off position before
connecting to the power source and/
or battery pack, picking up or carrying
the tools. Carrying power tools with
your finger on the switch, or energising
power tools that are switched on, invites
accidents.
Dress appropriately. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts to prevent them from becoming
caught in the tool.

WARNING
Please read these instructions carefully and keep for future reference
IMPORTANT SAFETY INFORMATION
FOR USE.
WARNING! Know your 9A Electric
Tacker. Do not plug the tool into the
power source until you have read and
understand the information in this
manual. Learn the tool’s applications
and limitations, as well as the specific
potential hazards related to the tool, to
reduce the risk of electric shock, fire or
serious injury.
Use the power tool, accessories and
tools bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
Only use accessories designed for use
with the tool.
Secure the workpiece. Use clamps or a
vice to hold the workpiece as this is safer
than using your hand and frees both
hands to operate the tool.
Do not use the power tool if the switch
does not turn it on and off. A power tool
that cannot be controlled with the switch
is dangerous and must be repaired.
Do not force the power tool. Always
use the correct power tool for your
application. The correct power tool will
do the job better and safer at the rate for
which it was designed.
Do not overreach. Keep proper footing
and balance at all times. This will enable
better control of the power tool in
unexpected situations.
Disconnect the plug from the power
source and/or the battery and remove
the nails/staples from the power tool
before making any adjustments, changing
accessories or storing. Such preventative
safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the tool. Power
tools are dangerous in the hands of
untrained users.
Maintain the power tool. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect operation. If damaged,
have the power tool repaired before use.
Many accidents are caused by poorly
maintained power tools.