VORO MOTORS EMOVE Cruiser Use and care manual

YOUR MACHINE IS POWERED BY
Master Guide

Table of Contents
PACKAGE CONTENTS ............................................................1
TECHNICAL SUPPORT............................................................2
GETTING TO KNOW YOUR EMOVE Cruiser............................3-18
SAFETY AND MAINTENANCE............................................19-20
Thank you for purchasing the EMOVE Cruiser, the world's most complete electric
scooter. This setup guide aims to help you through the initial process of getting to know
your EMOVE Cruiser.

Package Contents
EMOVE Cruiser Electric Scooter
Charger accompanied with 2-pin or 3-pin plug
Master Guide
Locking Key
Multipurpose tool kit
PACKAGE CONTENTS
Please contact [email protected] if any of the above is missing,
which is highly unlikely.
| 1

Technical Support
1-year manufacturer’s warranty. Covering battery, controller and
motor. Damages occured from rider's usage, cosmetic damages
and water damages are not covered.
Warranty is clear and no fine-prints. You may find our warranty
policy here: https://www.voromotors.com/pages/warranty
Our team over at VORO MOTORS, Inc. is constantly looking to
expand our dealer network to make servicing more accessible for
our riders, if you know anyone who wants to be a dealer for this
amazing product, feel free to email us.
Free online technical support at [email protected]
TECHNICAL SUPPORT
What you’ll get:
| 2

Setup process: Voltmeter1.
This device is your voltage meter. It measures the voltage of
your battery. This is where you insert your key and turn on the
device. Due to packing constraint, this component is loosened
on purpose prior to shipping.
Getting to know your EMOVE Cruiser
| 3

Use the tool kit that we purchase for you
The 2.5mm Allen key would be the correct hex key to use. (Not
in any particular left to right sequence)
Getting to know your EMOVE Cruiser
| 4
Secure your voltmeter
There is a small black round headed screw located at the
back of the voltmeter. You may secure it to the position of your
preference.

Tighten the front light
We loosen this on purpose due to packing constraint. If the
front light bulb is tightened in any position inside the
packaging, it would crack during shipment transit due to the
rough package handling.
Getting to know your EMOVE Cruiser
| 5
Pro-Tip: Use the tool kit that we have provided
Read the next page for detailed instructions.

Getting to know your EMOVE Cruiser
| 6
Open up your tool kit
You will find yourself plenty of other useful tools inside.
Use the 8mm socket wrench
Choose the smallest socket wrench in the tool kit and insert it
on top of the square tool as shown below.

Buttons and Indicators1.
Mode 1 - Lowest speed mode
Mode 2 - Average/Medium speed mode
Mode 3 - Highest speed mode (Use this mode when you need
more speed to overcome slopes, etc.)
Note: The higher the speed, the more battery it requires to power the
speed.
POWER button
2. How to change speed mode on EMOVE Cruiser?
Step 1 - Press the POWER button, the Speed Mode Indicator will
then begin to blink.
Step 2 - Press the MODE button to switch between Speed Mode
1/2/3.
Step 3 - Press the POWER button to save.
Getting to know your EMOVE Cruiser
3. What does each speed mean?
| 7
MODE button
Speed Mode Indicator

Getting to know your EMOVE Cruiser
3. Speed Modes
Basically works like your car gear.
1
2
3
LOWEST SPEED
CRUISING SPEED
INSANE SPEED
Just chillin'
I'm a normal person
Adrenaline junkie!
If you are going upslope,
switch to this mode to
"climb"
| 8