Voxelight UVReveal User manual
UVReveal
TM
Package Contents
UVReveal Tablet UVReveal Stand +
USB Charging Cable
Getting Started
1. Plug in your UVReveal. If using the powered stand, plug the USB power
cable into the port on the underside of the stand. Or, you may plug the USB
power cable directly into the USB port on the bottom of the UVReveal.
IMPORTANT: The first time you charge your UVReveal, you will need to
charge your unit overnight to receive a full charge.
2. While you will need to charge up your UVReveal overnight the first time,
for normal use, you will charge your UVReveal for a few hours until you see
a small green light in the top-right corner of the UVReveal’s screen.
UVReveal
TM
Setup
3. After charging your UVReveal, power it on by pressing the tablet
power button on the side of the unit.
Tablet Power Button
Tablet Power
Button is located
on the side of the
UVReveal tablet.
4. Your unit will boot up and then prompt you to begin the setup process.
You will first see the Welcome Screen.
Welcome Screen
Followed by Select Your Language Screen:
Select your language
UVReveal
TM
Setup
Next, you will set up your WiFi: Then, register your device:
UVReveal
TM
UVReveal Mirror Mode
Once you set up your UVReveal unit, you will need to turn on the UV Lights
to produce the required lighting for our UV camera to work indoors.
Turn on the UV LED lights by pressing the LED Power Button on the back of
the UVReveal:
LED Power Button
NOTE: UV lights will automatically
shut off after 3 minutes. If
additional viewing time is desired,
Press the LED Power Button again.
After you turn on the Skin Unveil, the Main Screen will appear and will show
your face in UV, on a live view screen (this will look like a high resolution
black and white image). There will also be a smaller window on the screen
that shows your face through the Skin Unveil’s natural lighting camera. This
view will appear in color.
You may access and change device settings by tapping the 3-dot icon.
UVReveal
natural
light image.
Device settings
menu
UVReveal
TM
After you take the photo, your side by side comparison images will appear
within the ‘send email’ screen. Simply enter the recipient email you’d like to
use and press ‘send’ to email the comparison photo to anyone you want to
send it to, including yourself.
Photo Compare and Share
To take a composite photo that will show your clien’t face through the
detailed view of Skin Unveil’s patented UV camera as well as the same
image of your skin as seen under natural light through the native camera,
simply hold still and press the Camera Icon at the bottom of the Skin Unveil
View and send the compostie photo
UVReveal
TM
For more infromation, please visit:
www.uvreveal.com
©2021 Voxelight LLC | UVReveal is a trademark of Voxelight LLC | Rev. 08/21
Technical Information
LED Light Source UV: 365 nm
180 sec
Dimensions238 mm (L) x 170 mm (W) x 21.7 mm (D)
Weight 798 g(UVReveal-8 only)
Kit Weight 2.75 kg
Battery 7-10 Ah LiPoly (non-replaceable)
Charger 5 V, 50/60 Hz, 2.4 A
Made in USA
Specifications*
Table of contents
