VS Sassoon DIGITAL SENSOR LUXE AIR STYLER VSHA501A User manual

VSHA501A

2
WE LOVE YOUR STYLE!
Congrats on pampering your hair
with your most flawless blowout yet.
But before using for the first time,
scan the QR code to watch
the how to use product video.
SCAN ME

Congrats on pampering your hair
with your most flawless blowout yet.
But before using for the first time,
scan the QR code to watch
the how to use product video.

DIGITAL SENSOR LUXE AIR STYLER
4
IMPORTANT SAFETY
INSTRUCTIONS
The following safety precautions should always be followed when
using electrical appliances, especially when children are present in
your household. Please read these instructions carefully & keep for
future reference.
Polythene bags over product or package may be dangerous. To avoid
danger of suocation, keep this wrapper away from babies & children.
This bag is not a toy.
DANGER:
• Do not use this appliance in or near bathtubs, showers,
basins or other vessels containing water - keep the
appliance dry.
• When this appliance is used in a bathroom, unplug it after use given
the proximity of water hazards are present even when the appliance
is switched o.
• If this appliance falls into water, unplug it immediately - DO NOT
REACH INTO THE WATER.
• Do not immerse the appliance into water or other liquids.
• This appliance is a burn hazard. keep appliance out of reach from
young children particularly during use & cool down.
• Always place the appliance on a stand if one has been provided, or
on a heat-resistant flat surface.
WARNING: Before & During Use
• Before using, always ensure that the voltage marked on the appliance
is the same as your local power voltage.
• If the appliance is designed to be connected to a detachable power
supply (otherwise known as a charger or adaptor), the appliance
must only be used with the power supply it was sold with.
• Do not operate this appliance or disconnect from the power supply

5
DIGITAL SENSOR LUXE AIR STYLER
with wet hands.
• Never use this appliance at the same time as styling products such
as aerosols (spray).
• Be very careful when handling this appliance as parts of it may get
extremely hot.
• Do not place the appliance on any heat sensitive surfaces or near
flammable materials or objects.
• Keep the cord away from heated surfaces.
• Never block the air openings of the appliance or place on a soft
surface such as a bed or couch where the air openings may be
blocked - keep the air openings free of lint & other debris.
• Do not cover this appliance with anything when it is switched on
or hot.
• To avoid electric shock, do not drop or insert any object into an
opening in this appliance.
• This is a high heat appliance. Care must be taken to avoid the hot
surfaces of the appliance coming into direct contact with the skin, in
particular the eyes, ears, face & neck.
• Do not use extension cord with this appliance.
WARNING: Storage & Maintenance
Always unplug the appliance immediately after use & before
cleaning or maintenance.
Do not wrap the power cord tightly around the appliance when
storing. This causes undue strain on the power cord & protective
guard. Over time, this will damage the power cord resulting in an
unsafe condition to the user.
• If the power cord is damaged it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a
hazard.
•
Do not leave the appliance unattended when plugged in or switched on.
• Always allow the appliance to cool down before storing away in a location
where children cannot reach it.
• Do not store or place this appliance in a location where it can fall or be
pulled into a bath or sink.

DIGITAL SENSOR LUXE AIR STYLER
6
• If the power cord is damaged it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
• Never operate this appliance if it has been dropped or damaged, or if it is
not working correctly.
• If this appliance is serviced by an unqualified person this could result in
an extremely hazardous situation for the user. Contact Conair Customer
Service if you have any issues operating your appliance.
CAUTION:
• This appliance is not intended for use by infirm persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience
& knowledge unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure they do not play with the appliance.
• Use this appliance only for its intended use & as described in this instruction
booklet. This appliance is not intended for commercial use.
• Do not use any attachments other than those supplied by Conair Australia
Pty Ltd.
• For additional protection, the installation of a residual current device (RCD)
with a rated operating current not exceeding 30mA is advisable in the
electrical current circuit supplying the bathroom - ask your installer for
advice.

7
DIGITAL SENSOR LUXE AIR STYLER
AMAZING CHOICE!
Smartly crafted with a 9-blade centrifugal fan system that provides
engineered-to-perfection air pressure, while the high-tech digital sensor
intelligently senses, computes & adapts heat, to ensure sustained styling
consistency, while caring for all hair types.
Combining 1 base with 6 interchangeable attachments for easy one-
handed styling, you can dry, smooth, tame, shape & style, plus the
motorised spinning brushes create perfect salon-styled volume & bounce.

DIGITAL SENSOR LUXE AIR STYLER
8
1. Energy saving 650 watts
2. High-Tech Digital Sensor
3. Power switch with 2 heat/speed
settings + cool setting
4. Left + right 2 directional
rotation switches
5. Superior Ionic Conditioning
System
6. Ceramic Technology
7. Hinged rear filter
8. DRIES & PREPS - Drying nozzle
attachment
9. DETANGLES & SMOOTHES -
3D paddle brush attachment
10. VOLUME & BOUNCE - 50mm
multi-directional round
spinning brush
11. VOLUME & BOUNCE - 40mm
multi-directional round spinning
brush
12. SHAPES & STYLES - 30mm
hard bristle brush attachment
13. TAMES & FINISHES - 2-in-1
styling comb attachment
14. 40mm & 50mm round brush
protective covers
1 6 4 3 2 5 7
8 9 1110
14
12 13
Ø 40mm Ø 50mm

9
DIGITAL SENSOR LUXE AIR STYLER
SUPERIOR IONIC CONDITIONING
Many aspects of modern living, including air conditioning, contact with
man-made fibers & air pollution add to the build-up of static electricity
in your hair. Even simply brushing & towel-drying your hair can increase
these levels. This static charge causes the scales, or cuticles of the hair, to
push hair strands apart, resulting in a rough hair surface. Consequently,
your hair may have a dull appearance. High levels of static charge cause
your hair to become ‘flyaway’ & dicult to style.
The advanced super anti-frizz technology releases 60% more ions*
to eliminate static, conditioning the hair cuticle for ultimate frizz-free
smoothness & enhanced shine.
CERAMIC TECHNOLOGY
Ceramic Technology helps keep your hair looking healthy & shiny by
maintaining even heat during the drying & styling process. Static is
reduced by quickly sealing the hair cuticle layer ensuring minimal frizz
making your hair easier to manage.
* Than a VS Sassoon hot air styler with standard ionic. Results may vary depending
on environmental factors, hair texture and condition.

DIGITAL SENSOR LUXE AIR STYLER
10
HOW TO USE
THE
IMPORTANT:
Hair that has been heavily bleached or chemically treated should only use
the low heat setting on this product. Please consult your hairdresser on
using heated appliances if you have any concerns about the condition of
your hair.
CAUTION:
Take care not to direct the airflow directly onto the skin (e.g. scalp, neck
ears, face, etc.) as hot air from the styler can, particularly if held too close,
cause discomfort or even burn.
BEFORE USING
• Remove all packaging & point of sale labels before use.
• Remove plastic cover from plug before use (used to protect it from
damage during transportation).
FITTING & REMOVING THE ATTACHMENTS
Slip the brush head onto the body of the unit & lock into place by sliding
the lock button located at the top or back of the brush attachment.
To remove the brush attachment, unlock it & gently pull it o.
PROTECTIVE BRUSH COVERS
Brush covers for the 40mm brush head & 50mm brush heads are in-
cluded for protection & easy storage. After use, always replace the pro-
tective cover shield over the brush head to protect the bristles.

11
DIGITAL SENSOR LUXE AIR STYLER
DRIES & PREPS:
Nozzle with high-pressure airflow, ideal for blast drying hair to prep for
tyling.
To use:
Direct the airflow onto the hair & move the Digital Sensor Luxe Air Styler
around the head until your hair is about 80% dry.
NOTE: If you notice the indicator light is flashing, this is completely
normal. The Digital Sensor Luxe Air Styler is automatically adjusting the
temperature to ensure sustained styling consistency + a gentler & kinder
heat for the hair.
DETANGLES & SMOOTHES:
3D paddle brush with dual-action taming bristles & straightening fins, for
eortless detangling & smoothing as you brush.
To use:
1. For a smoother, bouncy style:
a) Place the paddle brush head under a section of hair approximately
3cm wide, close to the scalp with the bristles pointing upwards.
b) Use your other hand to pull the hair section taut against the brush
head until the combs penetrate through the hair.
c) Gently glide the brush head through the section of hair, from root to
tip.
d) As the brush head nears the end of the hair section, turn the brush
head under to give shape at the ends of the hair.
e) For added control, place your other hand over the brush head as you
glide down the hair section.
f) Repeat for each section of hair.
OR;
2. For a smoother, sleeker style:
a) Moderately stretch sections of your hair with your free hand & place
the paddle brush over the top of the hair section with the bristles
pointing downwards, like you would with a normal hairbrush, ensuring

DIGITAL SENSOR LUXE AIR STYLER
12
your hair penetrates deep into the bristles.
b) Use your other hand to hold the end of the the hair section, to help
guide the brush.
c) Gently glide the brush head through the section of hair, from root to
tip.
d) As the brush head nears the end of the hair section, hold for a little
longer at the ends to give a sleeker finish to the end of the hair section.
e) Repeat for each section of hair.
NOTE: If you notice the indicator light is flashing, this is completely
normal. The Digital Sensor Luxe Air Styler is automatically adjusting the
temperature to ensure sustained styling consistency + a gentler & kinder
heat for the hair.
VOLUME & BOUNCE:
Create a salon styled blowout with 2x multi-directional motorised
spinning brushes that rotate left or right to add volume & softly rounded
ends, or rotate in the opposite direction to change up your look.
50mm round brush = use on long hair lengths
40mm round brush = use on shorter hair lengths & fringes
BRUSH ROTATION TIPS:
• Your styler has a two-way rotation that can be used when styling.
• To make the brush head rotate press the switch marked
‘ ’ or ‘ ’ on
the styler handle. These will make the brush head rotate in a clockwise
or anti-clockwise direction.
• Practice pressing the left & right rotation buttons to ensure you
understand the rotation directions before styling your hair.
• When the Digital Sensor Luxe Air Styler is set on the high heat/speed
setting, the brush head will rotate faster. When the styler is set on the
low heat/speed setting the brush head will rotate slower.
• The brush head does not rotate when used on the cool setting.
To use:
1. Choose either the 50mm or 40mm round brush.

13
DIGITAL SENSOR LUXE AIR STYLER
2. Divide your hair into sections, between 2.5cm - 5cm wide & no more than
1cm thick (if you have thick hair make the section around 5mm thick).
3. Place the brush under the section of hair, close to the roots & brush
through the section to remove tangles (without brush rotating).
4. For added volume at the root of the hair, hold the brush in place at
the root (hair section is draped over top of brush) for a few seconds.
5. Move the brush through the hair section (hair is draped over top of
brush), towards the ends & as you reach the end of the hair section;
start to rotate the brush away from your head by pressing & holding
the appropriate rotation direction switch
‘ ’ or ‘ ’ .
NOTE: As you do this, it is important to resist the rotation of the brush by
pulling the brush downwards. The brush should be rotating through the
section of your hair (without the hair becoming wound round the brush
head if you are holding the styler with the correct tension against the
hair) to create a brushing eect.
6. For even more volume, allow the brush to rotate, winding the entire section
of hair around the barrel, the brush will move upwards towards your scalp
then release the rotation switch & leave in the hair for a few seconds.
7. To release the section of hair, press & hold the opposite rotation button
to unwind the hair section.
8. Repeat for each section of hair.
9. For a lasting style, switch to the cool setting whilst holding the brush in
place. NOTE: The brush head does not rotate on this setting.
NOTE: If you notice the indicator light is flashing, this is completely
normal. The Digital Sensor Luxe Air Styler is automatically adjusting the
temperature to ensure sustained styling consistency + a gentler & kinder
heat for the hair.
IMPORTANT USAGE TIPS:
It may take several attempts to perfect the technique of using a rotating
hot air styler. If the brush spins too quickly & hair wraps around the brush
head, simply release the rotation button & remove from the hair. Use the
low speed setting & practice rotating the brush on the lower ends of your
hair until you feel comfortable with the styling action. If hair continues
to wrap around the barrel, you need to increase the downward tension.
It’s ESSENTIAL to section your hair before styling & to style section-by-
section to get the best results.

DIGITAL SENSOR LUXE AIR STYLER
14
SHAPES & STYLES:
30mm hard bristle brush for smooth shaping of ends, fringes or styling
shorter hair lengths.
To use:
1. Place the brush head underneath a section of hair, close to the scalp &
hold for a few seconds to boost volume at the roots.
2. Slowly move the brush head down through the hair, as you reach the
end of the hair section, rotate the slightly towards your face to curl the
ends under & create shape for a more natural style.
3. For a lasting style, select the cool setting on warm hair whilst holding
the brush head at the roots.
4. Repeat for each section of hair.
NOTE: If you notice the indicator light is flashing, this is completely
normal. The Digital Sensor Luxe Air Styler is automatically adjusting the
temperature to ensure sustained styling consistency + a gentler & kinder
heat for the hair.
TAMES & FINISHES:
2-in-1 styling comb helps to create volume at the roots or use it to tame
frizz & flyaways for a flawless blow-out.
To use:
For taming frizz & flaways:
1. Turn the dial on the top of the attachment to setting
.
2. Take a section of hair approximately 3cm wide &
starting close to the scalp, place the comb above the
section of hair (with the teeth of the comb pointing
downwards) (refer Fig.1).
3. Slide the power handle gently along the section of
hair from the roots to the tips, ensuring that the comb
goes right into the hair, while using your other hand
to help stretch out the section of hair (refer Fig.2). Fig.1

15
DIGITAL SENSOR LUXE AIR STYLER
For volume at the roots:
1. Turn the dial on the top of the attachment to setting
.
2. Take a section of hair approximately 3cm wide & place
the comb directly at the roots of the hair (with the
teeth of the comb pointing upwards) (refer Fig.3).
3. Hold the comb in place for 5-8 seconds, depending
on the hair type.
4. Then gently slide the power handle along the section
of hair from the roots to the tips, ensuring that the
comb goes right into the hair, while using your other
hand to help stretch out the section of hair (refer
Fig.2).
NOTE: If you notice the indicator light is flashing, this
is completely normal. The Digital Sensor Luxe Air Styler
is automatically adjusting the temperature to ensure
sustained styling consistency + a gentler & kinder heat
for the hair.
Fig.2
Fig.3

DIGITAL SENSOR LUXE AIR STYLER
16
OPERATING INSTRUCTIONS
Wash, condition & towel dry your hair. And ensure your hair is combed
through, & tangle-free.
If your hair is wet, use the DRIES & PREPS nozzle attachment to pre-dry
the hair to about 80% dry.
1. Make sure the switch is set to the o ‘0’ setting before plugging into
a 230-240V~ suitable power outlet.
2. Divide your hair into sections, between 2.5cm - 5cm wide, depending
on your hair type & the attachment you’ll be using.
3. Secure the selected attachment onto the power handle. To
interchange between the attachments, refer to FITTING & REMOVING
THE ATTACHMENTS.
4. To turn the Digital Sensor Luxe Air Styler on, slide the power switch
to the heat setting suitable for your hair type. There are 2 heat/speed
settings, plus a cool setting:
• Slide the switch to the third position ‘II’ for the high heat/speed
setting. This heat setting is suitable for medium to thick hair
• Slide the switch to the second position ‘I’ for the low heat/speed
setting. This heat setting is suitable for delicate, fine, bleached or
coloured hair
• Slide the switch to the first position ‘*’ to select the cool setting. Use
the cool setting on warm hair to set your style.
5. After use, slide the switch to the ‘0’ position to switch o & unplug
the power.
6. Allow the appliance to cool before storing away.
7. Once cooled, place the power handle & attachments into the storage
case.

17
DIGITAL SENSOR LUXE AIR STYLER
DUAL STORAGE CASE & STYLING MAT
Keep the styler & its’ attachments neatly stored in the storage case with a
compartment for every piece. Plus, the case conveniently folds out to a heat
protective styling mat.
To keep the Digital Sensor Luxe Air Styler & attachments in good order, it is
suggested to store in the compartments:

DIGITAL SENSOR LUXE AIR STYLER
18
CLEANING & MAINTENANCE
Blocked or clogged air intake vents will cause the styler to overheat.
The rear filter should be checked & cleaned on a regular basis - to help
maintain optimum performance & prevent overheating.
Unplug the styler & allow to cool completely before cleaning or storing.
• Holding the handle of your styler firmly, click down to open the rear filter
at the base of the styler.
• Using a soft brush, clean any hair & other debris that may build up in
the filter.
• Replace the rear filter by pushing back into position
If overheating occurs, an automatic safety device will shut the styler or
the heat o to prevent damage or personal injury. If the styler or heat
turns o, unplug the cord & allow the styler to cool for 15 minutes before
restarting. Make sure the air vents are 100% clean .

19
DIGITAL SENSOR LUXE AIR STYLER
LIMITED 3 YEAR WARRANTY
Retain this section of the warranty card with your receipt/proof of purchase.
You must present it to obtain replacement or service under the warranty.
The warranty may only be claimed where proof of original purchase is
presented, i.e. original purchase receipt or invoice.
Attach a copy of your purchase receipt and store in a safe place.
To make a warranty claim, call Customer Service on the phone number or
email below. Or you can return the defective product back to the place
it was purchased where it will be replaced (see point 12 of paragraph C.
Conditions).
Please provide the following details:
1. Date of purchase
2. Retailer name & location
3. Product name/model number
4. Confirm you have your purchase receipt
5. Detail the problem with your product
Conair Australia Pty Ltd Conair New Zealand Ltd
PO Box 146 PO Box 251159
Terrey Hills Pakuranga, Auckland
NSW 2084 New Zealand 2140
Customer Service Customer Service
Australia New Zealand
1800 650 263 0800 266 247
email: [e-mail] email: [e-mail]

DIGITAL SENSOR LUXE AIR STYLER
20
WARRANTY AGAINST DEFECTS
A. AUSTRALIAN CONSUMER LAW
1. Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for
a major failure and compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure. 2. The guarantees under the Australian
Consumer Law (“ACL”) are provided in sections 51 to 59 inclusive of the
ACL (“Statutory Guarantees”) and the remedies are provided in sections
259 to 266 inclusive of the ACL (“Statutory Remedies”).
B. VS SASSOON EXTENDED WARRANTY
1. In addition and subject to the Statutory Guarantees and Statutory
Remedies, the following express warranty (“Warranty”) commences from
the date of purchase and continues for a period of 36 months (“Warranty
Period”) after which it expires. Subject to the conditions in Section C
below, Conair warrants to the original purchaser (“Purchaser”) of the VS
Sassoon product that is the subject of this warranty (“Product”) that if
during the Warranty Period, the Product suers from any defect caused
by faults in materials or workmanship, Conair will a) replace the Product,
or b) exchange defective parts in the Product or c) repair the Product,
as Conair may choose in its discretion (“Warranty”). In this Warranty
“Conair” means Conair Australia Pty Limited (ABN 64 068 492 044) of
The Equinox Centre, Suite 101, 18 Rodborough Rd, Frenchs Forest, NSW,
2086. in relation to Products purchased in Australia and Conair New
Zealand Ltd in relation to Products purchased in New Zealand.
2. To honour the Warranty, Conair must replace, or exchange parts in, or
repair, the Product, as Conair determines, in accordance with paragraph
B1 above, subject always to the conditions in Section C below.
3. If any of the conditions in Section C below are inconsistent with any
provisions of the ACL or regulations made thereunder, those provisions
of the ACL or regulations shall prevail to the extent of the inconsistency.