VUGERA VG-QX8 User manual

User Manual
VG-QX8

This dash camera is a specialized onboard device that continuously records
videos while the vehicle is in use. Some features may not be available
depending on installation, driving conditions, and vehicle style. The video
quality might vary in each device as a result of the firmware settings.

3
Before Use
Scope of Product Liability
• Please read this Manual carefully before using the Product.
• This Product records videos while the vehicle is operating.
Use this Product only for reference when investigating incidents or
road accidents.
• This Product is not guaranteed to record for all events. The Product
may not record accidents with impacts that are too minor to activate
the impact G-sensor or accidents with massive impacts that cause
the vehicle’s battery voltage to deviate.
• Video Recording does not begin until the Product is completely turned
on (booted up). To ensure that all vehicle events are recorded, wait
until the Product is completely booted up after turning it on, and then
begin operating the vehicle.
• VUGERA is not responsible for any loss caused by an accident, nor is
it responsible for providing any support regarding the outcome of an
accident.
• Depending on the vehicle’s configuration or operating conditions,
some Product features may not be supported, and different firmware
versions may influence the Product’s performance or features.
This Product records videos while the vehicle is operating. Read and follow
the instructions in this guide to properly use and maintain the Product.
• Under the copyright laws, this Manual may not be copied, in whole or
in part, without the written consent of VUGERA.
• Every effort has been made to ensure this Guide’s accuracy.
However, we cannot guarantee the accuracy of the contents in this
document as there may be technical errors, omissions, and / or
future changes.
• VUGERA reserves the right to change or modify the Product and the
content of this Manual at any time without prior notice for Product
improvements.
• Images contained in this user guide are illustrations for instructional
purposes only and may differ from the actual Product.
• Users do not reserve the right to use the Product for purposes other
than as specified in this user guide.
• According to the Personal Information Protection Act and other
related regulations, the user / owner maybe held liable if the video
and / or conversation recorded by the device are distributed without
their consent.
Thus, special attention should be paid in using this Product.

4
■Caution
• Depending on the make and Model of your car, the Power maybe
constantly supplied to the dashcam even with the ignition turned off.
Installation of the device to a continuously Powered 12V outlet could result
in vehicle battery drainage.
• This device is designed to record video while the vehicle is in operation.
The quality of the video might be affected by weather conditions and the
road environment such as day or night, presence of street lighting, entering
/ exiting tunnels, and the surrounding temperature.
• VUGERA is NOT responsible for the loss of any recorded video during
operation. Although designed to withstand high impact of car collision,
VUGERA does NOT guarantee Recording of accidents where the impact
may cause the device to be damaged.
• Keep the windshield and Camera lens clean for optimal video quality.
Particles and substances on the Camera lens or windshield may reduce
the quality of the recorded videos.
• Ensure that the device is kept within these temperature ranges; otherwise,
the device may not function as designed and at extreme temperatures,
permanent physical damage can result which is not covered by warranty.
• Avoid placing the device under direct sunlight. Avoid using the device in
extreme conditions where the Product is exposed to high temperature and
/ or humidity.
• Only use genuine accessories and peripherals from VUGERA or authorized
VUGERA dealer. VUGERA does not warrant the safety and compatibility
from use of peripherals from other manufacturers. Use genuine parts
supplied by VUGERA.
• Do not apply excessive force when pushing the buttons on the device.
Do not clean the Product using chemical cleaner or solvents as it may
damage plastic components. Use soft, clean, dry fabric to gently wipe the
Product.
Do not place or store the device where it can be accessible by children and
pets.
•Do not disassemble the Product as it will void Product warranty and may
also damage the Product. Handle with care. Drop, shock, and mishandling
the Product may result in malfunction and / or damage to the device.
Do not operate this device while driving.
•Install this device in a location where it has unobstructed view of the road
but does not interfere with the driver’s view. Check with your State and
Municipal laws before mounting to the windshield.
•The device and / or installation parts have moving parts and may shift in
extreme road conditions such as unpaved road. Check frequently to ensure
the device is positioned as instructed in this guide. Do not operate or
handle Power Cable with wet hands.
• Do not use a damaged Power Cable. Keep the Power Cable away from
heaters or other hot objects. Check that Power Cable with correct
connector is used and the connections are secure and firmly in place.
• Do not pull, insert, or bend the Power Cable using excessive force. Do not
place heavy objects on the device and the Power Cable.
• Do not modify or cut the Power Cable. VUGERA does not guarantee that
devices or peripherals not authorized by VUGERA will be compatible with
its Product. Do not attempt to insert foreign objects into the device or
Power Cable. Do not spill or spray liquid into the device as it may cause
malfunction, fire, or electric shock.

5
■FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions : (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
User’s Caution Statement
Caution : Any changes or modifications to the equipment not expressly
approved by the party responsible for compliance could void user’s authority
to operate the equipment.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
■Information to user : RSS-247
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions : (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada appliCables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe (B) est conforme à la norme NMB-003
du Canada.

6
Manual Guide
Before Use 3
Scope of Product Liability 3
Caution 4
FCC Statement 5
Cautions
When using the Product 10
When using the Micro SD card 13
Introdution
Specifications 15
Device components and Optional items 16
Components 17
Key features 19
Using GUI
Main Menu 22
Preview 23
Wi-Fi 24
Playlist 25
Menu 27
LCD 28
Audio 30
Voice Recording 31
Volume Control 32
Sound Effects 33
Audio Guidance 34
System Settings 35
Time 36
Touchpad 37
Format SD Card 38
Image Quality Settings 39
Storage Space Settings 40
Configuration 42
Impact Sensitivity 43
Motion Sensitivity 44

7
Low Voltage Cut-off 45
Driving Mode 46
Parking Mode 47
Parking Mode Time 49
Factory Reset 51
Convenience 54
Front LED Settings 55
Speed Unit 56
Secret Mode 57
Language 58
Firmware 60
ADAS 61
Front Vehicle Departure Warning 62
Lane Departure Warning 63
Select Vehicle Type 65
Events pop-up 66
Device and LED Operations
Device and LED Operations 68
VUGERA PC Viewer Software
VUGERA PC Viewer Download 71
Using the PC Viewer 72
PC Viewer Preferences 73
Recorded file creation rule 74
VG-UX9 Model Recording Timetable 75
VG-QX8 Model Recording Timetable 75
Formatting your Micro SD card on PC
Micro SD Card Format 77

8
VUGERA Mobile Viewer Software
VUGERA Mobile APP Download 79
Mobile Viewer Screen Layout 80
Playing recorded Videos on the Mobile Viewer 81
Installing the Device onto your Vehicle
How to install the Device on your Vehicle 83
How to connect the Hardwire Power Cable 84
Product Warranty
General Information 86
Warranty Registration 86

9
Cautions
When using the Product 10
When using the Micro SD card 13

10
When using the Product
Cautions
This section helps ensure user safety and prevent property damage.
Please read carefully.
Caution
When the standard and optional features may not operate upon special
circumstances
Tips
Helpful information on the functions and features
Do not operate the product while driving.
Distraction while driving may be the cause of vehicle accidents
and result in an injury or death.
The product should be installed where the driver’s view may be
distracted.
Obstruction of the driver’s vision may be the cause of vehicle
accidents and result in an injury or death.
Ensure that you are aware of your state and municipal laws
related to mounting a dash camera on your windshield.
Unauthorized disassembly of the product will void the product
warranty. Handle the product with care.
If dropped, mishandled, or exposed to external impact, the
product may result in malfunction.
Even though the voltage cut-off feature protects your vehicle’s
starter battery from discharging, the starter battery may
discharge if the vehicle is left parked for a long time.
Avoid parking your vehicle from direct sunlight.
To protect itself from heating issues, the product will stop
recording upon detection of high temperatures.
Caution for adjusting the front lens angle
The front lens has a swivel angle of 110° (90° upwards and 20°
downwards).
To avoid damaging the front lens, do not apply force beyond this
range.
This product records while the vehicle is in operation or when
parked. The recording performance will depend on the
surrounding environment.
Video quality may deteriorate upon sudden change in
brightness, strong backlight, or when no light source is
present.
Excess or special window tinting may affect the video quality.

11
8)&/64*/(5)&130%6$5
Do not modify, disassemble, or repair the product.
- Do not operate or handle the Power Cable with wet hands.
Doing so may result in electrocution.
- Do not use damaged Power Cables.
Doing so may result in electrical fire or electrocution.
- Do not modify or cut the Power Cable.
Also, do not place heavy objects on the Power Cable or pull,
insert, or bend the Power Cable using excessive force.
Doing so may result in electrical fire or electrocution.
Do not expose the product to excess sunlight.
The product may fail if not operated between the specified
temperate range -4°F and 140°F (-20°C to 60°C).
The product may not function as designed and permanent
physical damages may result if operated or stored out of the
temperature range voiding the product warranty.
Do not use liquid cleaner or wet cloth when cleaning the device.
Use a dry cloth. Avoid liquid from penetrating the device as it
will cause a malfunction.
Do not operate the product while driving.
Distraction increases the risk of traffic accidents. Always stop
the vehicle in a safe spot prior to using the product.
The Advanced Driver Assistance System (ADAS) is an auxiliary
feature to assist with protecting driver safety.
This function may not be supported in all driver environments.
Install the device in a location where it will not interfere with
the driver’s vision to reduce the risk of traffic accidents.
Avoid impact with the device and keep free of foreign
substances as this may damage it or cause it to malfunction.
Ensure from time to time that the main body remains properly
installed.
Constant vibration may cause the device to fall off, resulting in
personal injury or Product damage.
When connecting the Power Cable to the Product, ensure that
the connection between the Cable plug and the Power Cable
connector on the Product is secure.
If the connection is loose, the Power Cable may become
disconnected due to vehicle vibration. Video Recording is not
available if the Power connector is disconnected.
The ADAS function requires a different setting for each type of
vehicle with which it is equipped (Car / Van / Pick-up truck).
It is recommended that you attach the device at the center top
of your windshield to enable its proper operation.

12
8)&/64*/(5)&130%6$5
WARNING : RF (Radio Frequency)
The UX9 and QX8 are manufactured with Wi-Fi (RF : radio
frequency) and tested to meet the Federal Communications
Commission (FCC), Industry Canada, and European guidelines
for RF exposure and Specific Absorption Rate.
To ensure that your exposure to RF energy generated by the
Wi-Fi does not exceed the exposure limits set forth by these
guidelines, orient devices with display screens such that the
display side is not directly in contact with your body.
Additional information about RF safety can be found on the
FCC website athttp://www.fcc.gov/oet/rfsafetyand the Industry
Canada website athttp://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/
sf01904.html.
NOTICE : Touchscreen
The touchscreen on your device, like most touch screens, is
made of glass-like plastic.
It can break if your device is dropped or receives a significant
impact. To reduce the risk of personal injury, avoid touching the
screen if the glass is broken, chipped, or cracked, and arrange to
have the screen replaced.
A cracked or chipped touch screen caused by misuse or abuse of
your device is not covered under the Standard Limited Warranty.
NOTICE : Heat-related concerns
Your device may become very warm during normal use.
Sustained contact with warm surfaces for long periods may
cause discomfort or injury.
To reduce potential heat-related concerns, follow these
guidelines.
If your device is used for long periods, its surface can become
very warm. While the temperature may not feel hot to the touch,
if you maintain physical contact with the device for a long time,
for example, if you rest the device on your lap, your skin might
suffer a low heat injury.

13
Please insert or remove the Micro SD card while VUGERA is
Powered off.
Ensure you insert the Micro SD card the proper way to avoid
damaging it.
If you remove the Micro SD card while the device is saving or
reading the data from it, data may be lost, and the Micro SD
card may also be damaged.
We recommend that the Micro SD card is formatted once a
month to ensure the best reliability and performance.
Check the data stored in the Micro SD card regularly to make
sure the device is working properly.
The factory-supplied Micro SD card is covered by a standard
12-month warranty.
Consumables wear out over a passage of time and use.
For best performance, we recommend that you replace the
Micro SD card every 6 months.
We recommend using the Micro SD card provided by VUGERA.
Using a Micro SD card sold by others may result in data loss or
device issues.
Since this card is exclusive to the VUGERA dash cam, using it in
a mobile phone or other external device may damage the card
and /or other device.
When using the Micro SD card

14
Introdution
Specifications 15
Device components and Optional items 16
Components 17
Key features 19

15
Specifications
Introduction
Important
We recommend to use 12V for this Product.
Our warranty covers Micro SD cards supplied by VUGERA only.
Copyrights
All rights for the content and maps in this guide are reserved by
VUGERA and are protected under copyright laws.
All unauthorized duplication, revision, publication, or distribution of
this guide without written consent from VUGERA is prohibited and is
eligible for criminal charges.
Registered trademarks
VUGERA is a registered trademark of CARNAVICOM.
Other Product logos and service names in this guide are trademarks
of the relevant companies. www.vugera.com.au
Product VG-UX9 VG-QX8
Camera Front 8 million pixels 4 million pixels
Rear 2 million pixels 2 million pixels
Resolution Front Ultra HD 3840 x 2160 Quad HD 2560 x 1440
Rear Full HD 1920 x 1080 Full HD 1920 x 1080
Compression method Video : H.265 / Audio : PCM
Recording
Driving recording, Parking recording,
Event recording, Forced recording,
Driving Hyperlapse recording,
Parking Hyperlapse recording
Low voltage
blocking function Supported
Audio Supported
Angle of view Front Opposite angle : 140º Opposite angle : 134°
Rear Opposite angle : 138º Opposite angle : 138°
Memory 64GB [Max. 256GB] 32GB [Max. 256GB]
Video output 2.7" IPS LCD / Window-touch
Size / weight Front 108mm x 59mm /
119.4 g
108mm x 59mm /
118.6 g
Rear 52mm x 31mm / 22.1g 52mm x 31mm / 22.1g
Power DC 12V – 24V , 0.5A
Power
consumption
Driving 469 mA 383 mA
Parking 1
(motion+event) 399 mA 321 mA
Parking 2
(event) 30 mA 29 mA
Working temperature -20Ⳅ~ 60Ⳅ(-4ⳅ~140ⳅ)

16
The following components are available as standard or Optional depending
on the package that you have purchased.
Should you encounter an issue with the package, please kindly contact your
seller that you purchased the item from.
The list of components are subject to change without notice as we may
change during the Product life-cycle stages.
Device components
VUGERA
main body Rear camera Hardwire Power Cable Rear Cable (8m)
Micro SD card &
SD card adapter Mounting Bracket A Quick Manual Warranty Leaflet
Optional items
Cigar Jack
Power Cable
(4m)
OBD
Power Cable
(2m)
Mounting Bracket
B (Base Mount)
Mounting Bracket
B (Cover)
Device components and Optional
items

17
Components
Touch LCD
Enables the use
to interact
directly with what
is displayed.
Front camera
Records the Front view.
Each part of the VUGERA exterior.
Internal GPS
Built-in GPS
Rear camera Port
Rear camera Cable connector
DC-IN Power port
Used to connect the Power
Cable.
Mounting Bracket A
Cradle on which to mount the
main body
Mounting Bracket A
Cradle on which to mount the main body.
Mount connector
Used to connect the mount.

18
$0.10/&/54
Speaker
Outputs the
voice guide and
buzzer sounds
to indicate
the Product’s
status.
Power button
Press : Manual Recording
Press and hold : ON / OFF
Connection port
Used to connect the
Rear camera to the
Front camera using
a Rear camera Cable.
Mounting Bracket B
Cradle on which to mount the
main body (wire cover).
* Optional item
Adhesive mount
Used to fix the Front & Rear
camera in the vehicle.
Micro SD card slot
Insert the memory card to save
Recordings.
MIC
Voice Recording.
Rear camera lens
Records the Rear view.
Security LED
Indicates that the video is
being recorded.
Security LED
Indicates that the video is being recorded.

19
Key features
Main features
Auto delete Recording function
If the memory card is full, the video files will be deleted
sequentially from the oldest and the auto delete Recording
function kicks in to keep the device continuously Recording while
driving.
Automatically deleted images cannot be recovered.
Advanced Driver Assistance System(ADAS) Function
The includes Front Vehicle Departure Warning (FVDW),
Lane Departure Warning System (LDWS).
Before using the Product’s features, you need to Select your
vehicle type (Car, Van or Pick-up truck) to optimize the
Product for your vehicle.
Storage settings
You can choose from Default Setting, Prioritize Driving,
Only Driving and Prioritize Parking. Changing your storage
settings will also reformat your SD card.
The storage settings will not change when they are initialized.
(default : Default Settings)
Low voltage cut-off function
The low voltage cut-off function prevents your vehicle battery
from discharging when the vehicle is parked for a long time.
Three different voltages and durations can be Selected in the
dedicated settings Menu.
The Parking Mode Recording function will NOT function if the
Low Voltage Cut-off setting function switches the Power off.
Hyperlapse function
Video Recording can be compressed while driving or parked
enabling longer Recording time.
However, impact and Manual Recording will NOT be available in
Hyperlapse Mode.
Driving and Parking Recording will be saved at one frame per
second. (1 fps)
The microphone is disabled in Hyperlapse Mode.
Image Quality Settings
The image quality can be set to three Modes.
(Low / Normal / High) (Default : High)
The system will reboot upon change of settings.

20
,&:'&"563&4
Recording Mode Descriptions
Driving By default, the device records and stores while driving.
Parking
(Default : off)
The device continues Recording after the vehicle is parked,
only if it is connected to constant Power and set into
Parking Mode.
Once the vehicle ignition is switched off, the device
switches into the Parking Mode after 10 seconds and starts
Recording when it detects any impact or Motion. The low
voltage blocking function and auto temperature blocking
function will only operate in the Parking Mode.
Low voltage option can be adjusted in the dedicated viewer
software.
Event
The dashcam stores the event Recording in driving Mode
when it detects an impact that exceeds a certain level of
sensitivity set by the G-sensor.
You can set and change the level of sensitivity in the
G-Sensor Sensitivity Menu or in the preference settings of
the dedicated viewer software [See page 71]
Manual The device stores the Manual Recording at the time you
push the Power button shortly in driving Mode.
Hyperlapse
Video Recording can be compressed while driving or
parked enabling longer Recording times.
However, impact and Manual Recording will NOT be
available in Hyperlapse Mode. Driving and Parking
Recording will be saved at one frame per second [1 FPS].
The microphone is disabled in Hyperlapse Mode.
Secret Mode
The video Recordings can be saved and protected
with a password disabling anyone else from modifying or
deleting the file.
HDR function
HDR (High Dynamic Range) enables to reproduce a greater range
of luminosity allowing to record a clearer video image.
12:00
12:00
LCD clock output function
The LCD screen can be set to show a digital clock when the
LCD screen is not in use. [See page 28]
VUGERA Mobile APP
An application for Android and iOS is available for viewing,
downloading, and sharing video files via the smartphone.