Vulcan-Hart 1GR65C User manual

VULCAN-HART COmpANy, p.O. BOX 696, LOUISVILLE, Ky 40201, TEL. [phone]
502-778-2791 QUOTE & ORDER FAX: [phone]
A2780 ISO9001 Vulcan-Hart Co.
Item # __________________________
C.S.I. Section 11420
F-32631 (6-07)
MODEL: 1GR65 SERIES FREE STANDING FRYER
1GR65 SERIES
FREE STANDING GAS FRYER
1GR65M: Behind the door millivolt thermostat control adjusts
from 200 to 400F.
1GR65D: Solid state temperature control programmable from
200 to 390F. Completely programmable with single
digital 4 character display. User selectable fat melt
modes. Automatic and manual select boil out modes.
Electronic ignition standard.
1GR65C: Computer control with digital character display.
Completely programmable with 10 product keys.
Adjusts from 200 to 390F. User selectable fat melt
modes. Automatic and manual select boil out modes.
Programmable Celsius and Fahrenheit temperature
scales. Electronic ignition standard.
STANDARDFEATURES
Stainless steel fry tank, 65 - 70 lb. capacity. Includes limited
12 year tank warranty.
1" full port ball type drain valve.
Stainless steel front top, sides and door.
Set of four 6" adjustable casters (2 locking).
Twin fry baskets with plastic coated handles.
150,000 BTU/hr. input.
Five heat exchanger tubes positioned for easy cleaning.
Hi-limit shut-off.
Combination gas shut-off valve and pilot ignition system.
Tank brush, stainless steel crumb scoop and clean-out rod.
One year limited parts and labor warranty.
ACCESSORIES
FRYMATE-VX21MS or VX21S add-on frymate.
Stainless steel tank cover.
Grease protector strips.
11/4" Rear Gas Manifold Pipe with Shutoff Valves to connect
single fryers in the field - up to three.
Single large basket - 183/4"w x 131/4"d x 51/2"h.
Set of twin baskets - 91/4"w x 131/4"d x 6"h.
Set of tri-baskets - 51/2"w x 11"d x 41/2"h.
3/4" Flexible gas hose with quick disconnect.
SPECIFICATIONS:
65 - 70 lb. capacity free standing gas fryer, Vulcan-Hart Model
No. (1GR65M) (1GR65D) (1GR65C). Stainless steel front top,
sides and door. Set of four 6" adjustable casters (2 locking).
Stainless steel fry tank with five heat exchanger tubes and a "V"
shaped cold zone. 1" full port ball type drain valve. Twin fry baskets
with plastic coated handles. 150,000 BTU/hr. input. Millivolt(M),
programmable solid state(D), or programmable computer(C)
control system. Electronic ignition standard with solid state and
computer control models. Tank brush, stainless steel crumb
scoop and clean-out rod.
Overall dimensions: 21"w x 301/4"d x 471/8"h.
Working height 361/4".
CSA design certified. NSF listed.
SPECIFYTYPEOFGASWHENORDERING.
SPECIFYALTITUDEWHEN ABOVE2,500FT.
Model 1GR65C
OPTIONS
Second year extended limited parts and labor warranty.
CERTIFIED

VULCAN-HART COmpANy, p.O. BOX 696, LOUISVILLE, Ky 40201, TEL. [phone]
502-778-2791 QUOTE & ORDER FAX: [phone]
NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and
specifications without notice.
F-32631 (6-07)
1GR65 SERIES
FREE STANDING GAS FRYER
IMPORTANT
1. A combination valve with pressure regulator is provided with
this unit.
Natural Gas 4.0" (102 mm) W.C.
Propane Gas 10.0" (254 mm) W.C.
2. An adequate ventilation system is required for Commercial
Cooking Equipment. Information may be obtained by writing
to the National Fire Protection Association, Batterymarch
Park, Quincy, MA 02269. When writing refer to NFPA No. 96.
3. All models require a 6" (152 mm) clearance at both sides and
rear adjacent to combustible construction.
OVERALL WORKING TANK FRY COMP. APPROX.
MODEL WIDTH DEPTH HEIGHT HEIGHT SIZE BTU/HR. CAPACITY SHP.WT.
1GR65M
1GR65D 21" 30
1
/ 4 " 47
1
/ 8 " 36
1
/ 4 " 19
1
/ 2 " x 14" 150,000 65 - 70 lbs. 275 lbs.
1GR65C
4. All models require a 16" (407 mm) minimum clearance to
adjacent open top burner units.
5. This appliance is manufactured for commercial installation
only and is not intended for home use.
SERVICE CONNECTIONS:
P1 1/2" (13 mm) rear gas connection (single units).
E1 115 volt cord & plug supplied on GRD and GRC fryers.