Vulcan-Hart 1GR45C User manual

Item # __________________________
C.S.I. Section 11420
VULCAN-HARTCOMPANY,P.O.BOX696,LOUISVILLE,KY40201,TEL.[phone]
502-778-2791 QUOTE&ORDERFAX:1-800-444-0602
A2780
ISO9001
Vulcan-Hart
Co.
F-32630(6-07)
SPECIFICATIONS:
45-50lb.capacityfreestandinggasfryer,Vulcan-HartModel
No.(1GR45M)(1GR45D) (1GR45C).Stainlesssteelfront top,
sides and door. Set of four 6" adjustable casters (2 locking).
Stainless steel fry tank with four heat exchanger tubes and a
"V"shapedcoldzone.1" fullportball typedrainvalve. Twinfry
baskets with plastic coated handles. 120,000 BTU/hr.
input. Millivolt(M), programmable solid state(D), or program-
mable computer(C) control system. Electronic ignition stan-
dard with solid state and computer control models. Tank
brush, stainless steel crumb scoop and clean-out rod.
Overall dimensions: 151/2"w x 301/4"d x 471/8"h. Working height
361/4".
CSA design certified. NSF listed.
SPECIFY TYPE OF GAS WHEN ORDERING.
SPECIFYALTITUDEWHENABOVE2,500FT.
MODEL: 1GR45 SERIES FREE STANDING GAS FRYER
1GR45 SERIES
FREE STANDING GAS FRYER
Model 1GR45D
1GR45M: Behind the door millivolt thermostat control adjusts
from 200° to 400°F.
1GR45D: Solid state temperature control programmable from
200°to390°F.Completelyprogrammablewithsingle
digital 4 character display. User selectable fat melt
modes.Automaticandmanualselectboiloutmodes.
Electronic ignition.
1GR45C: Computer control with digital character display.
Completely programmable with 10 product keys.
Adjusts from 200° to 390°F. User selectable fat melt
modes.Automaticandmanualselectboiloutmodes.
Programmable Celsius and Fahrenheit temperature
scales. Electronic ignition.
STANDARDFEATURES
Stainless steel fry tank, 45 - 50 lb. capacity. Includes limited
12 year tank warranty.
1" full port ball type drain valve.
Stainless steel front top, sides and door.
Set of four 6" adjustable casters (2 locking).
Twin fry baskets with plastic coated handles.
120,000 BTU/hr. input.
Four heat exchanger tubes positioned for easy cleaning.
Hi-limit shut-off.
Combination gas shut-off valve and pilot ignition system.
Tank brush, stainless steel crumb scoop and clean-out rod.
One year limited parts and labor warranty.
ACCESSORIES
FRYMATEVX15add-onfrymate.
Stainless steel tank cover.
Grease protector strips.
11/4" Rear Gas Manifold Pipe with Shutoff Valves to connect
single fryers in the field - up to four
Single large basket - 13"w x 131/4"d x 51/2"h.
Set of twin baskets - 61/2"w x 131/4"d x 6"h.
Set of tri-baskets - 41/4"w x 131/4"d x 51/2"h.
3/4" Flexible gas hose with quick disconnect.
OPTIONS
Second year extended limited parts and labor warranty.

Printed On Recycled Pap
er
VULCAN-HARTCOMPANY,P.O.BOX696,LOUISVILLE,KY40201,TEL.[phone]
502-778-2791 QUOTE&ORDERFAX:1-800-444-0602
NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and
specifications without notice.
F-32630(6-07)
1GR45 SERIES
FREE STANDING GAS FRYER
IMPORTANT
1. A combination valve with pressure regulator is provided with
this unit.
Natural Gas 4.0" (102 mm) W.C.
Propane Gas 10.0" (254 mm) W.C.
2. An adequate ventilation system is required for Commercial
Cooking Equipment. Information may be obtained by writing
to the National Fire Protection Association, Batterymarch
Park,Quincy, MA02269.When writing referto NFPA No.96.
3. Allmodels require a 6" (152 mm) clearanceatboth sides and
rear adjacent to combustible construction.
OVERALL WORKING TANK FRY COMP. APPROX.
MODEL WIDTH DEPTH HEIGHT HEIGHT SIZE BTU/HR. CAPACITY SHP.WT.
1GR45M
1GR45D 15
1
/ 2 "30
1
/ 4 "47
1
/ 8 "36
1
/ 4 " 14" x 14" 120,000 45 - 50 lbs. 215 lbs.
1GR45C
4. All models require a 16" (407 mm) minimum clearance to
adjacent open top burner units.
5. This appliance is manufactured for commercial installation
only and is not intended for home use.
SERVICE CONNECTIONS:
P1 1/2" (13 mm) rear gas connection (single units).
E1 115 volt cord & plug supplied on 1GRD and 1GRC fryers.