Vuly Balance Bike User manual

Balance Bike
See vulyplay.com/terms for the most recent
Vuly warranty policies, terms and conditions.
SAFETY INFORMATION, INSTALLATION, CARE AND MAINTENANCE INSTRUCTIONS.
READ PRIOR TO ASSEMBLING AND USING THE PRODUCT.
Vuly cares about safety. Adult supervision is required at all times whilst equipment is in use.
Attention!
Visit www.vulyplay.com/install
for step by step video instructions,
or scan this QR code:

Start Here What’s In The Box
ATTENTION!
Safety information, installation and use instructions.
Read prior to installing and using the monkey bar system.
See VulyPlay.com/support for any updates to these instructions.
WARNING!
• Adult assembly required.
• Adult supervision required at all times.
• Ensure that the system is secured with anchors or bolts before use.
YOU WILL NEED FOR ASSEMBLY!
• 5mm Allen Key
Vuly Play
95 Ingleston Rd, Brisbane QLD 4154
AU: 1300 667 514
US: 1-800-467-1421
www.vulyplay.com
Handlebar & Stem x1
Stem Cover x1
1 2

Installing Handlebars Installing Handlebars
fig. A fig. B
fig. D
Step 1:
Slide stem cover over stem. (fig. A.)
Step 2:
2. Push stem cover further up stem until bolts are accessible (fig. B.)
Step 5:
Align handlebars to be inline with front wheel and fork. Tighten stem
bolts. The stem should be tight enough to not move when twisted.
NOTE:
Ensure handlebars are
perpendicular to front wheel
before tightening stem bolts
(fig. E).
Step 3:
Remove headset bolt and top cap from fork and place to the side.
(fig. C)
Step 4:
Assemble as illustrated. Ensure bearings and spacers are seated
correctly and tighten headset bolt until bearings are compressed and
rotate smoothly. (fig. D)
43
Headset Bolt
Top Cap
Stem
Steerer Tube
fig. C
fig. E

Quick Clamp OperationAdjusting Seat Height
ATTENTION!
• Your Vuly Balance Bike is equipped with one quick release clamp
to facilitate the adjustment of the seat height. Failure to properly
install this quick release clamp on your bicycle may cause the seat to
become detached from the bicycle while riding and result in serious
bodily injury.
• A quick release clamp is a mechanism that uses a lever to tighten
or loosen the clamp.
• When swinging the quick release clamp from open to closed, the
clamp should grip firmly. This will fix the seatpost in place.
5 6
Step 1:
Open quick release clamp lever. (fig. F)
Step 2:
Adjust the seat height and ensure the seat is aligned to the frame.
(fig. G)
NOTE: Proper seat height should allow the child to sit on the bike with
both feet flat on the ground with a slight bend in their knees.
Step 3:
Close quick release clamp lever. (fig. H)
fig. F fig. G fig. H fig. I Closed fig. J Open

CAUTION!
• Be sure to operate the quick release clamp lever by hand only.
Never use any other tool such as a hammer to tighten the quick release
clamp lever, as this could cause damage to the lever and/or clamp.
• Make sure the quick release clamp levers are pushed fully to the
closed position. Note: If the lever can be easily pushed to the closed
position, this means the clamping strength is insufficient. Return the
clamp lever to the open position and rotate the adjuster nut 1/8 of a
turn clockwise. Push (do not twist or turn) to the closed position. The
clamp should be tight enough to keep height position and not allow
the seat to be moved with force of hands.
• CHOKING HAZARD - Un-assembled bikes and packaging contains
small parts. Keep away from small children.
• Like other bicycles, using the Vuly balance bike can be dangerous
and may result in injury or death even when used with proper safety
precautions. Use common sense and at your own risk.
• Properly dispose of all plastic wrapping and packaging materials.
• This partially assembled bike requires full assembly by an adult
according to this manual.
• Adult supervision is required at all times.
• Do not adjust the seat post above minimum insertion line as marked.
• Height range for usage is from 60cm - 120cm. Maximum load should
not exceed 34kg. Approved for children 3 and above.
• Never ride near steps, public roads, vehicular traffic, water, swimming
pools, sloped driveways, at night, or on rough and uneven surfaces.
For use on smooth surfaces away from safety hazards only.
• This balance bike has no brakes. Riders must stop with their feet.
• The rider should not ride faster than he or she can stop safely and
controllably.
• The seat should be adjusted properly so that the rider can touch the
ground at all times.
• Always wear a helmet when riding. Failure to wear a properly adjusted
and fitted helmet when riding can result in serious injury or death.
• Please retain this document for future reference.
Quick Clamp Operation Warnings
87
fig. K fig. L
DO NOT TWIST
Tighten
Loosen

9
Vuly Bike Fit Guide
Looking for the next bike for your child?
Take it to the streets
with the new
VULY BIKES