Wacom DTU-2235B User manual

USER’S MANUAL
Interactive pen display
Model:
1
Index
Contents
1
Index
Contents
Interactive pen display
Installation
Using the pen
Customizing the pen
Using the pen display
Customizing the pen display
Using the Radial Menu
Application-specific settings
Troubleshooting
DTU-2235B

2
Index
Contents
2
Index
Contents
Interactive pen display
Interactive pen display
User’s Manual
Version 1.0, Rev F2910
Copyright © Wacom Co., Ltd., 2010
All rights reserved. No part of this manual may be reproduced except for your express personal use.
Wacom reserves the right to revise this publication without obligation to provide notification of such changes.
Wacom does its best to provide current and accurate information in this manual. However, Wacom reserves the right
to change any specifications and product configurations at its discretion, without prior notice and without obligation
to include such changes in this manual.
The above year indicates when this manual was prepared. However, the date of release to the users of the “manual”
is simultaneous with the introduction into the market of the applicable Wacom product.
DuoSwitch is a trademark, and Wacom is a registered trademark of Wacom Co., Ltd.
Adobe and Reader are either registered trademarks or trademarks of Adobe systems Incorporated in the United
States and/or other countries. Microsoft, Windows, and Vista are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries. Apple, the Apple logo, and Macintosh are
trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
Any additional company and product names mentioned in this documentation may be trademarked and/or registered
as trademarks. Mention of third-party products is for informational purposes only and constitutes neither an
endorsement nor a recommendation. Wacom assumes no responsibility with regard to the performance or use of
these products.

3
Index
Contents
3
Index
Contents
Interactive pen display
TABLE OF CONTENTS
About the manual 5
Navigating the manual 6
YOUR INTERACTIVE PEN DISPLAY 7
Pen display features 8
Front view 8
Rear view 9
Adjusting display incline 10
Pen features 11
INSTALLATION 12
System requirements 12
Step 1: Display installation 13
Step 2: Pen tablet installation 17
USB cable installation 17
Software installation 18
WORKING WITH THE INTERACTIVE PEN DISPLAY 19
Ergonomics 19
Using the pen 20
Holding the pen 20
Positioning 20
Clicking 21
Dragging 21
Using the side switch 22
Working with pressure sensitivity 22
Erasing 22
Working with multiple monitors 22
Adjusting the display 23
Factory presets, auto-sync, and user settings 23
On Screen Display (OSD) settings 23
Power saving 26
CUSTOMIZING 27
Opening the control panel 27
Control panel overview 28
Calibrating the pen display 30
Adjusting pitch and phase (VGA only) 31
Customizing the pen 32
Adjusting tip feel and double-click 32
Adjusting eraser feel 33
Advanced tip and eraser pressure settings 34
Customizing pen buttons 35
Button functions 36
Using and customizing the Radial Menu 40
Working with Display Toggle 41
Application-specific settings 42
Creating an application-specific setting 43
Changing application-specific settings 44
Removing application-specific settings 44
TROUBLESHOOTING 45
Testing the interactive pen display 46
Testing your pen 47
Display troubleshooting 48
General display problems 48
VGA problems 50
Pen tablet troubleshooting 51
General problems 51
Windows-specific problems 54
Macintosh-specific problems 55
Technical support options 57
Obtaining driver downloads 58
APPENDIX 59
Caring for the interactive pen display 59
Replacing the pen tip 60
Using an alternate mount or stand 61
Uninstalling the interactive pen display 62
Managing preferences 63
Installing multiple tablets 64
Pen and digital ink capabilities in Windows 65
About the Windows Tablet PC Input Panel 66

4
Index
Contents
4
Index
Contents
Interactive pen display
Product specifications 67
Model DTU-2235B interactive pen display 67
General specifications 67
Display 68
Tablet 69
Power adapter 69
Pen (model UP-817E) 69
Pen (model UP-818E) 69
Product information 70
Ordering parts and accessories 70
Available parts and accessories 70
Radio and television interference 71
FCC notice 71
Industry Canada (Canada only) 72
CE declaration 72
Precautions 73
Physical location 73
Environment 73
Usage 74
Handling 74
Warranty
(Worldwide, Except for Europe,
Africa and Middle East) 76
Limited Warranty 76
Warranty Service in the U.S.A. and Canada 77
Warranty Service Outside of
the U.S.A. and Canada 77
Licence warranty conditions
(Europe, Africa and Middle East) 78
Software Licence Agreement 78
Limited Warranty 79
GLOSSARY 81
INDEX 83

5
Index
Contents
5
Index
Contents
Interactive pen display
ABOUT THE MANUAL
This document provides quick access to information about your interactive pen display. Click on a
navigation button or highlighted word to move through the document. The information is common to
Windows and Macintosh computers and Windows screen captures are shown, unless otherwise noted.
If you are new to electronic documentation, read navigating the manual.
• Go directly to contents or index topics by clicking on them.
•S
MALL CAPITAL LETTERS identify the names of keyboard keys, dialog boxes, and control panel options.
• You can use your viewer zoom-in tool to increase the size of the page on your display screen.
• The following information is not included with this product: information about your specific computer
hardware or operating system, or information about your application software. Your best source for this
information is the set of manuals and discs that came with your hardware, operating system, or
application.
• Many applications have built-in support for pen display features (such as pressure sensitivity).
Visit Wacom’s web site to find a listing of applications that support these features (see product
information).
• For information on how best to use pen display features within a specific application, see the
instructions in that application’s manuals.
Wacom’s philosophy is to continually improve all of its products. As a result, engineering changes and
improvements are made from time to time. Therefore, some changes, modifications, and improvements
may not be covered in this document.

6
Index
Contents
6
Index
Contents
Interactive pen display
NAVIGATING THE MANUAL
Use the navigation controls to move through the manual:
Go to front page.
Go to table of contents.
Go to index.
Go back to previous view.
Page back, or page forward.
Go to topic.
Topic continued.
Adobe®Reader®provides additional tools for using and printing the manual. See the Adobe Reader help
for more information.
Contents
Index
topic

7
7
Index
Contents
Index
Contents
Interactive pen display
YOUR INTERACTIVE PEN DISPLAY
This manual describes the installation and use of your interactive pen display.
The Wacom Tablet control panel enables you to customize your pen and pen display settings. To learn
more, see customizing.
Pen display features
Adjusting display incline
Pen features
The following information is not included with this product: information about your specific computer
hardware or operating system, or information about your application software. Your best source for this
information is the set of manuals and discs that came with your hardware, operating system, or application.
Note: Not all product models are available in all regions.

8
Index
Contents
8
Index
Contents
Interactive pen display
PEN DISPLAY FEATURES
Familiarize yourself with the features and components of your product.
FRONT VIEW
On Screen Display (OSD) controls
Use to adjust the display settings.
See adjusting the display.
Status LED
Lights blue when pen is in active area of the pen
display and the pen tip is pressed. LED will not
light unless the USB cable is plugged into an active
USB port.
Power switch
Turns unit on or off.
Power LED
Lights blue when power has been supplied to pen
display and a video signal is present.
Glows orange when no video signal is detected.
(e.g., Your computer is turned off, starting up, or
has entered a power management mode in which
video signals are not sent.)
USB ports (one on each side of unit)
For external USB devices, such as a flash drive.
Fully install the pen display hardware and software
before connecting any devices.

9
Index
Contents
9
Index
Contents
Interactive pen display
REAR VIEW
Important: Do not lift the unit by the stand; this may damage the stand mechanism. When lifting or moving
the pen display, always do so by grasping the main body casing.
Always store the interactive pen display on a stable surface or in its original packing carton when not
in use. Be sure to adjust the stand to the low tilt position before packaging. If you do not close the
stand, the notched mechanism may be damaged during transportation and storage.
Security slot
Allows easy attachment
of a security cable.
Pen storage compartment
Store by inserting one end of the pen into either side of the
compartment. Then gently press other end of pen into the
compartment.
Remove by pressing in on either end of the pen to eject opposite
end from the compartment. Grasp pen and remove.
Stand adjustment lever
Connection panel
• Power connector
• DVI/VGA (digital/analog) switch. Be sure to
set for the video connection you will be
using. Applies to the input and output
video connections.
• DVI-I out connector
• DVI-I in connector
• USB connector
Display stand
Adjusts the tilt angle of the unit. See adjusting
display incline.
Pen tether attachment point
If using a pen tether, connect it to an
attachment point located on either side of unit.

10
Index
Contents
10
Index
Contents
Interactive pen display
ADJUSTING DISPLAY INCLINE
• To open the display stand, pull up on the adjustment
lever and swing stand out to desired incline.
Release lever to lock the stand in place.
• To close the stand, pull up on the adjustment lever
and gently move stand back into closed position
until the latch catches. Release lever to lock the
stand in place.
Caution
Avoid catching your finger in the gap of the movable
portion of the stand.