Veikk VK640 User manual

VK640
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch

2
English
3 –19
Čeština
20 –36
Slovenčina
37 –53
Magyar
54 –70
Deutsch
71 –87

3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention to
the safety instructions. If you have any questions or comments about the device, please
contact the customer line.
✉www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

4
Safety Precautions
Do not use this product in a control system that requires a high degree of safety and
reliability.
In such a system, this product may negatively affect other electronic devices and
malfunction due to the effect to those devices.
Turn the power off in areas where use of electronic devices are prohibited.
On board an aircraft or in any other location where electronic devices are prohibited,
please unplug the USB connector from the tablet to turn it off.
Keep out of reach of children to avoid danger.
Make sure that a child does not put the pen or pen tip in his/her mouth.
The pen tip or side switch cover could be detached and be accidentally swallowed.
Do not place this product on an unstable surface.
Placing this product on unstable or tilted surface or in a location exposed to excessive
vibrations could cause it to fall off which may damage the product.
Do not place heavy objects on top of this product.
Do not step or place heavy objects on this product as this could damage it.
Avoid high or low-temperature locations for storage.
Do not store this product in a location where the temperature drops below 5°C or goes
above 40°C and locations subjects to excessive temperature fluctuations to avoid damage
to the product.
Do not disassemble.
Do not disassemble or modify this product as this could expose you to heat, fire, electric
shock and injury. Disassembling the product will also void your warranty.
Do not use alcohol for cleaning.
Never use alcohol, thinner, benzene or other mineral solvents as they could discolour or
cause deterioration to the product.
Do not expose to water.
Do not place glasses or vases filled with water or other liquids near this product. Exposure
to water or liquid could damage the product.
Do not place metal objects on this product during operation.
Placing metal objects on this product during operation could cause it to malfunction or
damage it.
Do not strike the pen against hard objects.
Striking the pen against hard object could damage it.
Do not handle the pen with soiled hands.
The pen is high-precision instrument. Handling it with soiled hands or using it in locations
exposed to dust or strong odors may cause the entry of foreign matter which will result in
breakdown.

5
Product Overview
1. LED Indicator
2. Shortcut Keys
3. VEIKK Logo
4. Active Area
Pen
Note: The passive pen requires neither battery nor charging.
Pen Nib
Button 1
Button 2

6
Packing List
VK640 Pen Tablet
Batter-free Pen
Pen Pocket
Pen Nibs
Pen Holder x 1
(Including 8 pen
nibs)
Nib Removal
Quick Start Guide
Installing Driver
OS Support
Windows 11/10/8/7 (32/64 bits) / Mac OS 10.12 or later
Linux OS / Chrome 88 or later
Android 6.0 or later (Expect Samsung Android device)
Installation
For Mac OS, Windows and Linux OS computer:
1. Before installing the driver, please uninstall all tablets drivers from your computer
and keep al antivirus programs and the drawing software closed.
2. Connect the tablet to your computer before installation (Please refer to Tablet
Connection)
3. Please download the driver from www.veikk.com.
4. Click Set up .exe and follow onscreen instructions.
5. Restart your computer after installation.
For Chrome OS computer and the Android mobile phone:
No need to install VEIKK driver on the Chrome OS computer and the Android mobile phone.

7
Tablet Connection
For Mac OS, Windows and Linux OS computer:
1. Connect the tablet to your computer with USB cable.
2. Open the driver interface. If the product model shows at the upper left corner, this
indicates that the tablet has been connected successfully. You can start using your
tablet.
For Chrome OS computer:
Connect the tablet to your Chrome OS computer with the USB cable, then you can start
using your tablet.
Note: The shortcut keys on the pen and tablet can’t work on the Chrome OS computer.
For Android mobile phone:
1. Please connect the tablet to your phone with the OTG adapter.
2. Rotate the tablet as shown in Figure 1, then you can start using your tablet.
Note1: Works in mobile phone vertical screen mode only.
Note2: For some mobile phones, you need to enable to OTG function manually in the
phone’s settings.
Note3: The shortcut keys of the pen and tablet can’t work on Android mobile phone.
Figure 1

8
Replacing the Nibs
When the pen nib is heavily worn, please replace the nib with the nib removal.
1. Insert the pen nib
into the pen
holder hole
2. Tilt the pen so that
the pen holder can
fully catch the pen
nib.
3. Pull out the nib
4. Insert a new nib
into the pen and
push it straightly
until it stops
Specifications
Model
VK640
Dimension
232 mm x 152 mm x 8 mm
Working
6 x 4 inch
Pressure Sensitivity
8192 levels
Resolution
5080 LPI
Reading Height
10 mm
Interface
USB
Keys
6 Shortcut Keys

9
Driver Settings
Windows
Pen:
Pen Function Settings
You may customize the functions of pen buttons. Use the “Pen”option to program custom
keystrokes.

10
Current Pen Pressure
Current Pen Pressure shows the current pressure level being exerted on your tablet and
can be used to test pen pressure.
Click Sensitivity
You can adjust pen pressure to “Output”or “Input”sensitivity on here.
Mapping
Define the tablet area that will be mapped to the screen area.

11
Screen Mapping
All Area: the entire active area of the tablet. This is the default setting.
Part Area: Click Part

12
Then go to the next page, select one of the following three ways to define the screen
range.
Monitor1: If more than one monitor is in use and you are in extended mode, you need to
choose the related monitor on the driver interface which are you going to map to. If your
monitors are in mirror mode (All monitors display the same content), the tablet maps to
the entire space on each monitor and the screen cursor is displayed on each monitor
simultaneously.

13
Working Area
All Area: the entire active area of the tablet. This is the default setting.
Part Area: Click Part

14
Then go to the next page, select one of the following three ways to define the pen tablet
partial.
Enable Windows Ink Function
This is capability can be toggled on and off here. Enabling this will allow support for
Windows Ink and applications that urn using Windows Ink.

15
Function
Customize the keys functions for different applications.
Application List
You can add or remove software by “+”or “-“
“+”Click “+”to add softwares, you have two ways to select an application.
1. Choose from the dropdown (need to open the software firstly)
2. Choose from the browser
“-“Click “-“to remove the softwares you added before.

16
Hotkey
Redefine Hotkey: Click on the title of the button. A dropdown menu will appear with list of
tool options. Choose the one you want to use.
Mac
Note: Driver setting in Mac system are the same in Windows system.
Users who use Mac system can take reference to Windows system.

17
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
Using the product for any purpose other than that for which the product is intended or
failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g., during transport, cleaning
by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries,
etc.).
Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic
discharge voltage (including lightning), faulty supply or input voltage and inappropriate
polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.

18
EU Declaration of Conformity
This equipment is in compliance with the essential requirements and other relevant
provisions of Directive 2014/30/EU and Directive 2011/65/EU amended (EU) 2015/863.

19
WEEE
This product must not be disposed of as normal household waste in accordance with the
EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU). Instead,
it shall be returned to the place of purchase or handed over to a public collection point for
the recyclable waste. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. Contact your
local authority or the nearest collection point for further details. Improper disposal of this
type of waste may result in fines in accordance with national regulations.

20
Vážený zákazníku,
Děkujeme vám za zakoupení našeho produktu. Před prvním použitím si prosím pečlivě
přečtěte následující pokyny a uschovejte si tento návod k použití pro budoucí použití.
Zvláštní pozornost věnujte bezpečnostním pokynům. Pokud máte k přístroji jakékoli dotazy
nebo připomínky, obraťte se na zákaznickou linku.
✉www.alza.cz/kontakt
✆[phone]
Dovozce Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz