Wagan PURE LINE 1000 User manual

Item No. / Artículo No / Article n° :
Pure Line 1000: 3804-4 (24V DC Input), 3804-8 (48V DC Input)
Pure Line 2000: 3808-4 (24V DC Input), 3808-8 (48V DC Input)
Pure Line 3000: 3810-4 (24V DC Input), 3810-8 (48V DC Input)
PURE LINE INVERTERS
PURE LINE 1000 | PURE LINE 2000 | PURE LINE 3000
User’s Manual / Manual de Usuario / Guide d’Utilisation
We are constantly improving our products so specifications are subject to change without notice.
Visit our website for the latest product information
Estamos mejorando nuestros productos constantemente, por lo tanto, las especificaciones están sujetas a cambios
sin previo aviso. Visite nuestro sitio web para obtener la información más reciente de los productos.
Nous améliorons constamment nos produits, alors les spécifications sont sujettes à changement sans préavis.
Visitez notre site Web, pour obtenir les dernières informations sur nos produits.
(24V only)
RoHS
compliant

Pure Line Inverters by Wagan Tech®
1www.wagan.com
CONTENTS
Introduction...............................................................................................................................3
Specifications ............................................................................................................................ 4
Warning ................................................................................................................................... 6
Disposal/Recycling of Inverter.................................................................................................... 6
Front Panel................................................................................................................................ 7
Rear Panel ................................................................................................................................ 9
Remote On/Off Control .............................................................................................................9
Load Considerations..................................................................................................................9
Planning the inverter system.................................................................................................... 10
Determining Maximum Appliance Wattage.............................................................................. 10
Configuring the battery bank................................................................................................... 10
Setting up the battery bank......................................................................................................11
Battery bank diagram..............................................................................................................11
DC cable gauge....................................................................................................................... 12
Connecting the Inverter............................................................................................................ 13
Operating Issues: Television and Audio Equipment Suggestions ................................................ 14
Troubleshooting....................................................................................................................... 15
CONTENIDO
Introducción............................................................................................................................ 17
Especificaciones ...................................................................................................................... 18
Advertencia ............................................................................................................................20
Eliminación/reciclaje del inversor............................................................................................. 20
Panel Frontal........................................................................................................................... 21
Panel posterior........................................................................................................................ 23
Control Remoto Encendido/Apagado ....................................................................................... 23
Planeando el sistema inversor.................................................................................................. 24
Consideraciones de carga........................................................................................................24

©2018 Wagan Corporation. All Rights Reserved.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User’s Manual—Read before using this equipment
2
TABLE DES MATIÈRES
Introduction............................................................................................................................. 32
Détails techniques .................................................................................................................. 33
Avertissement.......................................................................................................................... 35
Jeter/recycler l’onduleur.......................................................................................................... 35
Panneau avant........................................................................................................................ 35
Panneau arrière ...................................................................................................................... 37
Télécommande marche/arrêt ................................................................................................... 38
Planification du système de l’onduleur ..................................................................................... 38
Aspects à considérer – Charge................................................................................................. 38
Établir la puissance maximale en watts de l’appareil................................................................ 38
Configuration du groupe de batteries ...................................................................................... 39
Configuration du groupe de batteries ...................................................................................... 39
Diagramme du groupe de batteries .........................................................................................40
Problèmes d’utilisation : Conseils pour les appareils audio-vidéo .............................................. 43
Résolution de problèmes..........................................................................................................44
Determinación de la potencia máxima del aparato ..................................................................24
Configurar el banco de baterías ..............................................................................................24
Configurando el banco de baterías.......................................................................................... 25
Diagrama del banco de baterías.............................................................................................. 26
Calibre del cable CC................................................................................................................ 26
Conexión del inversor.............................................................................................................. 27
Problemas de funcionamiento: Sugerencias para equipos de audio y televisión ........................ 29
Solución de problemas............................................................................................................ 30

Pure Line Inverters by Wagan Tech®
3www.wagan.com
INTRODUCTION
Thank you for purchasing the Wagan Tech®Pure Line Pure Sine Wave DC to AC Power Inverter.
Read and understand this manual before installing and operating this inverter. Keep this manual
for future use.
It delivers a true AC sine wave identical to that of commercial power. Use this inverter to power
AC appliances in your vehicle. Pure Sine Wave AC means that your sensitive electronics, such
as audio/video systems, computers, and communications equipment will operate properly.
Furthermore, appliances with motors operate cooler, quieter, and more efficiently when they are
powered by pure sine wave AC.
The inverter is powered from DC voltage and it will continuously deliver AC power at 115 volts,
60 Hz. Superior surge capability allows the inverter to start most difficult motorized appliances.
Advanced microprocessor-controlled circuits run cooler and are more reliable than competing
units. The Pure Line inverter operates at high efficiency (up to 90%), that results in long run time
and extended battery life compared to other inverters with this level of power output. A 2.1A
USB power port provides a convenient way to power USB devices, including tablets, e-readers,
smartphones, and other mobile electronics.
The Pure Line inverter comes with a separate ground terminal typically found on higher capacity
units. This terminal helps to reduce the noise caused by power conversion when using radio
frequency devices.
The DC terminals have been designed with protective covers to minimize the risk of accidental
shortage when handling the DC cables. This inverter bonds neutral to ground, just like utility
power. The enclosure vents have been minimized to reduce the risk of pest intrusion in arid
tropical climates.
This inverter has added safety features including ETL certification (24V only), conformal coating,
GFCI protection, and DC terminal protection.
The Wagan Pure Line Pure Sine Wave Inverter is an indispensable addition to your compliment
of mobile power equipment. With minimal care and proper treatment, it will provide years of
reliable service.

©2018 Wagan Corporation. All Rights Reserved.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User’s Manual—Read before using this equipment
4
SPECIFICATIONS
All models:
Output waveform Pure sine wave
Output 115V AC
Efficiency > 90%
Frequency 60Hz
Total harmonic distortion (THD) < 3%
Cooling fan Thermally controlled
USB power port 2.1A, 5V
Power output control AC On/Off Switch
PURE LINE 1000 (3804-4 & 3804-8) only:
Input 3804-4 —24V DC
3804-8 —48V DC
TrueRated Power™ 1,000W (24-hour continuous)
Peak surge 2,000 watts
No load current draw < 1.0A
Battery low alarm 3804-4 —21V ± 1.0V DC
3804-8 —42V ± 2.0V DC
Battery low shutdown 3804-4 —20V ± 1.0V DC
3804-8 —40V ± 2.0V DC
Over voltage shutdown 3804-4 —33V ± 1.0V DC
3804-8 —56V ± 2.0V DC
AC output sockets 2 North American standard
Dimensions 13.0 × 7.0 × 3.0 in.
Net weight (approximate) 6.0 lb
Included DC cable with ring connectors 36 in., 6 AWG
ETL certification (UL 458 Standard) 3804-4 —Yes
3804-8 —No

Pure Line Inverters by Wagan Tech®
5www.wagan.com
PURE LINE 2000 (3808-4 & 3808-8) only:
Input 3808-4 —24V DC
3808-8 —48V DC
TrueRated Power™ 2,000W (24-hour continuous)
Peak surge 4,000 watts
No load current draw < 2.0A
Battery low alarm 3808-4 —21V ± 1.0V DC
3808-8 —42V ± 2.0V DC
Battery low shutdown 3808-4 —20V ± 1.0V DC
3808-8 —40V ± 2.0V DC
Over voltage shutdown 3808-4 —33V ± 1.0V DC
3808-8 —56V ± 2.0V DC
AC output sockets 3 North American standard
Dimensions 17.5 × 8.7 × 3.7 in.
Net weight (approximate) 11. 7 lb
Included DC cable with ring connectors 36 in., 2 AWG
ETL certification (UL 458 Standard) 3808-4 —Yes
3808-8 —No
PURE LINE 3000 (3810-4 & 3810-8) only:
Input 3810-4 —24V DC
3810-8 —48V DC
TrueRated Power™ 3,000W (24-hour continuous)
Peak surge 6,000 watts
No load current draw < 2.0A
Battery low alarm 3810-4 —21V ± 1.0V DC
3810-8 —42V ± 2.0V DC
Battery low shutdown 3810-4 —20V ± 1.0V DC
3810-8 —40V ± 2.0V DC
Over voltage shutdown 3810-4 —33V ± 1.0V DC
3810-8 —56V ± 2.0V DC
AC output sockets 3 North American standard
Dimensions 19.0 × 8.7 × 3.8 in.
Net weight (approximate) 12.5 lb
ETL certification (UL 458 Standard) 3810-4 —Yes
3810-8 —No
* All specifications are typical at nominal line, half load, and 77 ºF (25 ºC) unless otherwise noted. Specifications are subject
to change without notice.

©2018 Wagan Corporation. All Rights Reserved.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User’s Manual—Read before using this equipment
6
WARNING
sInverter output can be lethal. Improper use of this inverter may result in property damage,
personal injury or loss of life.
• Keep the inverter away from any direct heat source or combustible materials.
• Keep well ventilated—this device generates heat.
• Keep this inverter in a dry environment.
• Do not operate any equipment over the rated capacity.
• This inverter is designed to operate from a 24 or 48 volt DC power source only, depending
on model.
• Do not attempt to connect the inverter to any other power source, including any AC power
source.
• Incorrect battery polarity will damage the inverter and void the warranty.
• Do not open the inverter; there are no user serviceable parts inside.
DISPOSAL/RECYCLING OF INVERTER
Electronic products are known to contain materials that are toxic if improperly disposed. Contact
local authorities for disposal and recycling information.

Pure Line Inverters by Wagan Tech®
7www.wagan.com
FRONT PANEL
Pure Line 1000
High Output
Terminals Power LED
GFCI LED
Fault LED ON/OFF/Remote
Switch
Two 115 V
AC Outlets
Remote ON/OFF
Switch Connection 2.1A USB Port
Power LED
GFCI LED
Fault LED
Thr e e 115V
AC Outlets
Remote ON/OFF
Switch Connection
ON/OFF/Remote
Switch
2.1A
USB Port
High Output
Terminals
Pure Line 2000 & Pure Line 3000
• ON/OFF Switch — This switch controls AC output of the inverter.
• Power LED (Green) — When this green LED is lit, the inverter is operating normally.
• GFCI LED (Yellow) — When the yellow LED is lit, the ground fault circuit has been
interrupted. Shut down the inverter and restart.

©2018 Wagan Corporation. All Rights Reserved.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User’s Manual—Read before using this equipment
8
• Fault LED (Red) — The RED indicator turns on as the inverter shuts down due to overheating,
overload, under voltage, or over voltage.
• Immediately turn off all AC appliances if the FAULT LED is lit. Allow the inverter to cool
before continuing. Make sure that the ventilation vents are not blocked.
• If an inverter shutdown was preceded by a buzzing sound, there may be an excessive
load in combination with a low voltage or cable problem.
• AC Outlets — These outlets can supply up to 15 amps at 115V AC 60 Hz, depending on
capacity of the inverter.
• High Output AC Terminals — There are three insulated terminals on the front panel of the
inverter. These terminals are for connecting 115 volt AC devices that require more than 15
amps to operate. Other uses are for connection to distributed wiring that has multiple AC
outlets. Remove 2 screws on protective cover to access terminals. Any AC output wiring
that is directly connected must comply with US National Electric Code (NEC) wiring gauge
recommendations. Facing the front panel, the terminals are:
Left Middle Right
Neutral Ground Live
NEUTRAL and GROUND are bonded inside the inverter to comply with the National
Electric Code (NEC) requirement that any AC source must have a neutral to ground
connection.
• USB Power Port — This power port can supply 5 volts at 2.1A for charging or powering
tablets, e-readers, smartphones, and other small electronic devices.
• Audible Alarm (internal to the inverter) — When the Audible Alarm makes a buzzing sound,
the inverter senses a low battery condition. The user should reduce the AC load, charge the
battery, and check the DC cable for excessive losses.
• Remote Switch Connection

Pure Line Inverters by Wagan Tech®
9www.wagan.com
REAR PANEL
Mounting
Points
Positive (+) DC
Input Terminal Negative (–) DC Input Terminal
Terminal
Cover High Speed
Cooling Fans Ground Terminal
All models
• Positive Terminal — Positive (+) DC Input (Red)
• Negative Terminal — Negative (−) DC Input (Black)
• Cooling Fans — High-speed and load controlled
• Ground Terminal — For attaching an insulated safety ground wire. This safety wire is
for protecting personnel if there is an unlikely failure in either the cabling or enclosure
insulation. Grounding the inverter enclosure ensures personnel safety should a DC cable
problem occur. During the installation procedure, the Ground Terminal is connected either
to a vehicle chassis or to the negative DC terminal of the battery. Do not directly connect
this ground connection to the negative DC terminal of the inverter. Use an insulated 10
gauge wire to make the ground connection. If the inverter installation is located in fixed
location, the safety wire can be connected to earth’s ground.
REMOTE ON/OFF CONTROL
Optional wired remote control sold separately. Item #AA5603. Visit wagan.com to order.
Insert wired remote plug into Remote Switch Connection port. Set ON/OFF switch to “remote”
position.
LOAD CONSIDERATIONS
The startup load of an appliance is a major factor of whether this inverter can power it. This
initial load is only momentary. With many appliances, it is approximately twice the continuous
load, but some appliance startup loads can be as high as eight times the continuous load.
The inverter will automatically shut down in the event of an output overload so there is no danger
of damaging either the inverter or the equipment. When the red LED indicator is lit, the inverter is
signaling a fault.