Wagan 4320 User manual

Item No.:4320
Brite-Nite™
R600LEDSpotlight™
User’s Manual
We are constantly improving our products so specifications are subject to change
without notice.

Brite-Nite™R600 LED Spotlight™by Wagan Tech®
1
Thank you for purchasing the Brite-Nite™R600 LED Spotlight™by Wagan Tech®.
With normal care and proper treatment, it will provide years of reliable service.
Please read all operating instructions carefully before use.
FEATURES
• Bright LED spotlight
•3 brightness levels
• Rechargeable Li-ion battery
• DC charging adapter and micro-USB to USB cord included
SPECIFICATIONS
Lumens High— 600 lm
Medium— 200 lm
Low— 50 lm
Run Time High— 1 hr
Medium— 3 hr
Low— 12 hr
Battery 3.7V 1800 mAh Li-ion
Impact Resistance 3 ft (1 meter)
Beam Distance 810 ft (247 m)
IP Rating IP44 Water Resistant
Charge Time 4 hrs
Charging Input 5V, 1A

User’s Manual—Read before using this equipment
2
CAUTION
• Never point the light beam directly into the eyes of another person
or animal.
• This product is not a toy: Do not allow children to play with this item.
• Do not store in direct sunlight or near a heat source.
• Use for intended purposes only.
• Do not submerge in water.
• Lens gets hot after prolonged use. Avoid heat sensitive surfaces.
OPERATION
1. Locate power switch
2. Click 1X for high
Click 2X for medium
Click 3X for low
Click 4X to turn off

Brite-Nite™R600 LED Spotlight™by Wagan Tech®
CHARGING THE INTERNAL BATTERY
Please charge before initial use. In order to prolong the life of the battery, be sure
to fully recharge the unit every 3 to 6 months, even if the unit has not been used.
1. Connect the micro-USB end of the USB cable to the spotlight’s input port.
2. Plug the other end of the cable into a USB power port such as a USB wall
charger, USB car charger or power bank.
3. The charge indicator LEDs will illuminate red while charging and will turn
green when fully charged (about 4 hours).
When it comes to quality work lights,
Wagan is the brand you can depend on.