3
Step 3
D
D
Option A
Wood Stud
E
Option B Concrete/brick Wall
60
50mm
2“
50mm
2“
8
5/16”
50mm
2“
55mm
2.2“
Mark the position with your Bubble Level & pencil on the wall. Drill 3/16"(4.5mm) diameter x 2”(50mm) length
holes at the marked position, attach the mount to wood stud and tighten using Bolt Dwith screwdriver.
(Screwdriver not included)
Mark the position with your Bubble Level & pencil on the concrete wall. Drill 5/16"(8mm) diameter x 2.2"(55mm)
length holes at the marked position, Insert Anchors Eand attach the mount to wall and tighten using Bolt Dwith
screwdriver. (Screwdriver not included)
