Walmart GFS00520F User manual

PERGOLA 10x8
Vendor stock No. GFS00520F
WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC
MISE EN GARDE : TENIR LE TISSU DE CETTE TENTE LOIN DE
TOUTE FLAMME ET DE TOUTE SOURCE DE CHALEUR

1

PERGOLA 10x8
Vendor stock No. GFS00520F
Right Post
Left Post
Left Corner
Connector
Right Corner
Connector
Short Right
Connector Bar
Short Left
Connector Bar
Top Bar 1
Top Bar 2
Fabric
Hanger 1
Rail
Support Bar Joiner
4-hole Retainer
Base Plate
U-Shape Kit
Right Cover
Lock
Left Cover
Lock
Duo Tube
Connector
Post Base Plate
5-hole Retainer
Sling Canopy
Fabric
Hanger 2
2

PERGOLA 10x8
Vendor stock No. GFS00520F
M6x15 Bolt & Washer
M6x40 Bolt & Washer
M6x55 Bolt & Washer
M6x65 Bolt & Washer
Ground Spike
Allen wrench
Hardware Contents
3

PERGOLA 10x8
Vendor stock No. GFS00520F
STEP 1
Parts Required: A1,A2,M,L,AA,FF
Attach the Post Base Plate (M) to the Right Post (A1), align Base Plate (L) to the holes on the Post, as shown below.
Place M6*15 Bolt and washer (AA) and use Allen Wrench (FF) to tighten.
Repeat step for Left Post (A2).
A1
A1 &A2
M
A2
M
M
AA
AA
L
4

PERGOLA 10x8
Vendor stock No. GFS00520F
STEP 2
Parts Required: AA,B1,B2,,FF,I,K
Attaching Left Connector Bar (B1) and Right Connector Bar (B2).
1. First Place Jointer (I) over the Left Connector Bar (B1).
2. Second Insert the 5-hole Retainer (K) into Right Connector Bar (B2) aligning the two left holes.Repeat the step for Left
Connector Bar (B1).
3. Slide Joiner (I) and align the first hole on Left Connector Bar (B1) and Right Connector Bar (B2) . There now should be 4
holes, using the M6*15 Bolt and Washer (AA) tighten all bolts with Allen wrench (FF.)
AA
B2 B1
I
IB1
B2
I
B2
K
B2
I
B1
AA
B1
K
attentionattention
5

PERGOLA 10x8
Vendor stock No. GFS00520F
STEP 3
Parts Required: AA, C1, C2, F, K
Attaching Short Right Connector Bar (C1) & Short Left Connector Bar (C2).
Insert 5-Hole Retainer (K) into Short Right Connector Bar (C1),aligning the two holes on the right. Insert the Short Left Connector Bar
(C2) into the left side of the 5-Hole retainer (K) aligning with the two holes on the left side. Use M6*15 Bolt & Washer (AA) to tighten
using the Allen wrench (FF).
6

PERGOLA 10x8
Vendor stock No. GFS00520F
STEP 4
Parts Required: AA, D1, D2, J
Attaching Top Bar 1 (D1) & Top Bar 2 (D2).
Insert 4-hole Retainer (J) to Top Bar 1 (D1) and align with the two right holes. Insert Top Bar 2 (D2) to the two left holes on the
4-hole retainer (J). Using M6*15 Bolt & Washer (AA) tighten all bolts with Allen wrench (FF).
D1 D2
D2
J
AA
AA
JD2
D1
D1 D2
7

PERGOLA 10x8
Vendor stock No. GFS00520F
STEP 5
Parts Required: B1, B2, C1, C2, DD, N, FF
Place both on a soft surface.
Now that Left Corner Connector Bar (B1) and Right Corner Connector bar (B2) are tighten.
Now that Short Right Connector Bar (C1) and Short Left Connector bar (C2) are tighten place opposite and on top of B1 & B2.
Now that they are align place a U-Shape Kit (N) and tighten using M6*65 Bolt and Washer (DD) tighten with Allen wrench
(FF). Repeat on all 4 corners as shown on picture above.
B1
B2
B2
B1
C2
C1
C1
C2
N
N
N
B2
C2
DD
B1
C1
DD
N
8

9
PERGOLA 10x8
Vendor stock No. GFS00520F
STEP 6
Parts Required: B1, B2, BB, D1, D2,FF
Now that Top Connectors (B1&B2) are tighten start placing Top Bars (D1 & D2) total of 5, connect using M6*40 Bolt and
Washer (BB) & tighten using Allen wrench (FF).
B1 &B2
BB
D1 &D2
B1
B2 B1
B2
D1
D2

Insert the M6*15 Bolt and Washer (AA) over the aligned U-Shape Kit (N) to attach (A1).
10
PERGOLA 10x8
Vendor stock No. GFS00520F
STEP 7
Parts Required: A1, A2, AA, B1, B2, C1, C2, DD, FF, N
Attaching Post (A1 & A2) to pre-assembled connector bars (B1, B2, C1, C2).
Attach the Right Post (A1) to the pre-assembled Connectors (B1&C1).
Insert the M6*55 Bolt and Washer (CC) over the aligned U-Shape Kit (N) to attach (B1&C1).
Tighten all bolts with Allen Wrench (FF).

PERGOLA 10x8
Vendor stock No. GFS00520F
11
STEP 8
Parts Required: A1, A2, AA, B1, B2, C1, C2, DD, N, FF
Repeat previous step for assemble A2.

PERGOLA 10x8
Vendor stock No. GFS00520F
STEP 9
Parts Required: A1, A2, AA, B1, B2. H
Attach one support bar (H) to the Right Corner Connector (B2) and Right Post (A2) by inserting an M6x15 Bolt & Washer (AA),
Don’t tighten completely.
Repeat procedure on Right Post (A1) & Left Corner Connector (B1).
Securely tighten all bolts.
12

PERGOLA 10x8
Vendor stock No. GFS00520F
STEP 10
Parts Required: A1, A2, EE
Insert Ground Spikes (EE) into the holes on the Post Base Plate (L) on Right Post (A1) & Left Post (A2) and into the ground.
13
119.6inch
96inch

PERGOLA 10x8
STEP 11
Parts Required: E1 & E2
Connect Fabric Hanger (E2) to Fabric Hanger (E1).
14
Vendor stock No. GFS00520F

PERGOLA 10x8
Vendor stock No. GFS00520F
STEP 12
Parts Required: E1, E2, G, P1, P2
Push in Left Cover Lock (P2) into Fabric Hanger (E1&E2),which is close to the A2.
Push in Right Cover Lock (P1) into Fabric Hanger (E1&E2), which is close to A1.
Place Sling Canopy (G) over the frame.
Insert Fabric Hanger (E1&E2) through Sling Canopy(G).
15

PERGOLA 10x8
Vendor stock No. GFS00520F
STEP 13
Parts Required: A1, A2, CC, F, FF, G, O, P1, P2
Align Rail (F) horizontally and connect with Right Cover Lock (P1) that is already connected to Sling Canopy (G). Repeat same
process to Left Cover Lock (P2).
Secure the Rail (F) to Right Post (A1) by placing a Duo Tube Connector (O) over the Insert (F) and using M6*55 Bolt & Washer (CC),
tighten all bolts with Allen Wrench (FF) Repeat Process to Left Post (A2).
Once top post have been secured, repeat process to bottom of Post (A1 & A2).
16

PERGOLA 10x8
Vendor stock No. GFS00520F
STEP 14
Parts Required: F,G,P1,P2
Adjust Sling Canopy (G).
By unlocking the Cover Locks (P1 & P2). Adjust Rail (F) and Sling Canopy (G) as pleased.
Once you have adjusted canopy sling(G) Switch the Cover Locks (P1 & P2) down. This will secure Rail (F) from moving.
Make sure to lock all sides.
17

WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC
Cette tente est fabriquee d'un tissu resistant au feu, mais qui n'est pas ininammable. Ce tissu brûlera s'il est
laisse en contact continu avec une source d'inammation.
MISE EN GARDE : TENIR LE TISSU DE CETTE TENTE LOIN DE
TOUTE FLAMME ET DE TOUTE SOURCE DE CHALEUR
This tent is made of ame-resistant fabric. It is not reproof. The fabric will burn if left in
continuouscontact with a ame source.
Questions, problèmes, pièces manquantes? Avant de retourner au magasin, veuillez appeler notre service à la clientèle au
(866)905-4107 entre 8h30 et 17h00, HNP, ou entre 11h30 et 20h00, HNE, du lundi au vendredi.
PERGOLA de 3 x 2,44m
Vendor stock No. GFS00520F
Wal-Mart Instructions d’assemblage
PERGOLA de 3 x 2,44m
Vendor stock No. GFS00520F
Wal-Mart Instructions d’assemblage

1
Questions, problèmes, pièces manquantes? Avant de retourner au magasin, veuillez appeler notre service à la clientèle au
(866)905-4107 entre 8h30 et 17h00, HNP, ou entre 11h30 et 20h00, HNE, du lundi au vendredi.