WamBam NERVOUS NELLY User manual
WWW.WAMBAMFENCE.COM 1
ASSEMBLY
INSTRUCTIONS VF15100
VF15100
ASSEMBLY
INSTRUCTIONS
60 MIN
Approximate assembly me
Want to see a video on how to
assemble this product?
Scan the QR code
NERVOUS
NELLY
VINYL FENCE
WWW.WAMBAMFENCE.COM VER. 042821
WWW.WAMBAMFENCE.COM
2
ASSEMBLY
INSTRUCTIONS
VF15100
kCheck the inside of the larger pieces in your box for other
materials packed inside.
k
k
unobstructed assembling.
k
components.
VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging
care department.
parts.nychbrands.com
704-892-5222 /877-778-5733
Customer service agents are available to take calls weekdays from 9am-
5pm EST.If you call outside of business hours, please leave a voicemail.
number VF15100
Please give us a call at 704-892-5222 / 877-778-5733.
GENERAL
INFORMATION
MISSING
OR
DAMAGED
PARTS?
NEED
ASSEMBLY
HELP?
NEED TO
RETURN?
IMPORTANT
WWW.WAMBAMFENCE.COM 3
ASSEMBLY
INSTRUCTIONS VF15100
MEET CLEVER JOE
WE KNOW YOU HATE READING INSTRUCTIONS.
WWW.WAMBAMFENCE.COM
4
ASSEMBLY
INSTRUCTIONS
VF15100
REALITY CHECK
ROME WASN’T BUILT IN A DAY, AND YOUR FENCE PROBABLY WON’T BE EITHER.
Take plenty of breaks.
PAY ATTENTION TO SLOPES!
you order might be too short.
PRACTICE MAKES PERFECT
WWW.WAMBAMFENCE.COM 5
ASSEMBLY
INSTRUCTIONS VF15100
JUST A COUPLE MORE THINGS
OTHER STUFF YOU NEED TO KNOW
AND FINALLY...
things:
k
k
k
WWW.WAMBAMFENCE.COM
6
ASSEMBLY
INSTRUCTIONS
VF15100
PITFALLS!
HAVE YOU CONTACTED
YOUR LOCAL UTILITIES?
HAVE YOU CHECKED YOUR
LOCAL ZONING LAWS?
ARE YOU ABSOLUTELY SURE
WHERE YOUR PROPERTY
LINE IS?
HAVE YOU TALKED TO YOUR
NEIGHBORS?
IMPORTANT!
UNSTABLE GROUND OR
ROCK?
1
2
3
4
5
is made easy for you.
line limits.
kSimply call 811 in the US or visit www.call811.com.
kIn Canada, visit www.transcanada.com/contactus.html
for a list of phone numbers by province.
WWW.WAMBAMFENCE.COM 7
ASSEMBLY
INSTRUCTIONS VF15100
TOOLS AND MATERIALS YOU’LL NEED
Safety Glasses
(oponal String Line Level)
(Purchase or rent a similar product from Home
Depot, Lowe’s or an equipment rental store.)
(2 for each panel)
Cordless Drill (preferably with a high-torque
seng)
(for hex head screws)
(oponal)
String Line Stakes
Spool of String
Tape Measure
Earplugs
(rental available through us or some local equipment companies)
(must deliver at least 2.5 cu. . of air at 70-80 PSI. Available at your
local equipment rental company.)
OPTIONAL
WWW.WAMBAMFENCE.COM
8
ASSEMBLY
INSTRUCTIONS
VF15100
MURPHY’S VINYL FENCE LAWS
LET’S PRETEND (JUST FOR A MOMENT) THAT YOU LIVE IN A PERFECT WORLD.
WWW.WAMBAMFENCE.COM 9
ASSEMBLY
INSTRUCTIONS VF15100
36in.
Theonlyfence that’sfun to install.
Ground
WamBam Anchor
(Large)
1.5in.
3.5in.
5.5in.
43in.
4.5in.
6in.
1.5in.
79.5in.
84in.
2in. Ground 1.5in.
4.5in.
.090in. wall
thickness
1.5in.
3.5in.
.090in. wall
thickness
.090in. wall
thickness
1.5in.
1.5in.
48in.
1.5in. 3.6in.
3in.
DETAILED PRODUCT DIMENSIONS AND SPECIFICATIONS
44in.
42in.
WWW.WAMBAMFENCE.COM
10
ASSEMBLY
INSTRUCTIONS
VF15100
STEP 1:
MATERIALS
A
C
B
D
E
Top Rail (1)
⅞
F
(6)
G
Vinyl Glue (1)
(1)
(1)
WWW.WAMBAMFENCE.COM 11
ASSEMBLY
INSTRUCTIONS VF15100
STEP 2:
STEP 2.1
Use a post pounder to stabilize the pipe anchor in the anchor
If obstrucons exist beneath
the ground, please refer to our
‘Murphy’s Vinyl Fence Laws’ Guide
for further claricaon.
Make sure your
anchor posioner is
level with the ground
and not sloped at an
angle.
pipe anchor.
STEP 2.2
STEP 2.3
2”
WWW.WAMBAMFENCE.COM
12
ASSEMBLY
INSTRUCTIONS
VF15100
STEP 2.4
STEP 3.1
STEP 2.5
Pounding the pipe anchor from all four
the ground.
stakes.
42”
STEP 3:
STRING LINE
WWW.WAMBAMFENCE.COM 13
ASSEMBLY
INSTRUCTIONS VF15100
STEP 4.1
Lay out one of the rails
along the string line.
the end of the rail. Repeat this step for all of your anchor
Right angle string
line applicaon.
Use the same
fence rail as a spacer
for ease of use and
to avoid potenal
scratching on all of
the rails.
Lay out all of the anchor
posioners from start to nish before
installing the pipe anchors. This will
help to idenfy obstacles and allow
you to adjust as needed.
Top View Side View
3’
5’
4’
STEP 4:
STEP 4.2
STEP 4.3
Rail
Rail
Rail
WWW.WAMBAMFENCE.COM
14
ASSEMBLY
INSTRUCTIONS
VF15100
STEP 5:
SOIL AND
STEP 5.1 (OPTIONAL)
The anchor posioner is designed to
adjust both up and down on the pipe anchor
to help you determine the nal elevaon of
the post.
The hex head tek screws are packaged
with the anchor posioner. You may need to pre-
drill before installing the tek screw. Use a 1/8”
drill bit.
STEP 5.2 STEP 5.3
3”
WWW.WAMBAMFENCE.COM 15
ASSEMBLY
INSTRUCTIONS VF15100
Theonlyfencethat’sfuntoinstall.
Ground
1 in.
3 in.
Theonlyfencethat’sfuntoinstall.
WWW.WAMBAMFENCE.COM
16
ASSEMBLY
INSTRUCTIONS
VF15100
STEP 6:
LEVELING DONUTS
STEP 7:
POSTS
STEP 6.1
STEP 7.1
The
level should sit
on the boom
of the anchor
posioner.
The donut can be
adjusted to compensate
for a slightly crooked pipe
anchor. Slide the donut
either le or right to create
a level plane between the
anchor posioner and the
donut.
fence line. This can be accomplished by using the string line. Fasten the donut to the pipe anchor using
WWW.WAMBAMFENCE.COM 17
ASSEMBLY
INSTRUCTIONS VF15100
STEP 8:
FENCE PANELS
STEP 8.1 STEP 8.2
(B)
slide the Middle Rail (C)
in the posts and into place.
B
CD
Rails may need to be trimmed down to t.
See “How to Trim Down Your Fence Panel” in our
“Murphy’s Vinyl Fence Laws” guide.
Slide the Pickets through the
STEP 7.2 STEP 7.3
pipe anchor.
the posts.
Make sure the
grooves in the posts are
aligned square with your
string line.
WWW.WAMBAMFENCE.COM
18
ASSEMBLY
INSTRUCTIONS
VF15100
STEP 8.3
Slide the Top Rail
(F) through the
Top Rail Middle Rail
A
F
Screws must be
driven into the pickets
and the proper cavity
of the rails as illus-
trated.
STEP 8.4
WWW.WAMBAMFENCE.COM 19
ASSEMBLY
INSTRUCTIONS VF15100
STEP 9.1
Top View
E
STEP 9:
PANELS TO POSTS
STEP 9.2
This step will ensure that your
fence rails will never fall out of your
posts like tradional vinyl fence rails
somemes do.
(E) through the
rails.
Do not over-ghten the
3½” self-drilling stainless steel
screws because it will cause the
vinyl to dimple.
Line up and drive the
3½” self-drilling stainless
steel screws along the edge
of the rounded post corner
as shown.
WWW.WAMBAMFENCE.COM
20
ASSEMBLY
INSTRUCTIONS
VF15100
STEP 10:
POST CAPS ONTO POSTS
STEP 10.1 STEP 10.2
Put a small bead of Vinyl Glue (G) along the
inside of the post cap.
Place the glued post caps on the posts and
Vinyl Weld
Gluing your post caps permanently
in place is oponal but recommended.
Cap’n Jack Cap’n America Cap’n Morgan
Other manuals for NERVOUS NELLY
1
This manual suits for next models
1
Other WamBam Fencing & Gate manuals
WamBam
WamBam Steady Freddy User manual
WamBam
WamBam HANDY ANDY User manual
WamBam
WamBam VF13002 User manual
WamBam
WamBam EVEN STEVEN User manual
WamBam
WamBam Yard & Pool Vinyl Gate User manual
WamBam
WamBam NERVOUS NELLY User manual
WamBam
WamBam TRADITIONAL CLASSIC VF13003 User manual
WamBam
WamBam Nantucket Vinyl Picket Gate w/Stainless Steel... User manual
WamBam
WamBam Jiminy Picket User manual
WamBam
WamBam VG26200 User manual
WamBam
WamBam AG14002 User manual
WamBam
WamBam STURBRIDGE BL19104 User manual
WamBam
WamBam BL19101 User manual
WamBam
WamBam VF13007 User manual
WamBam
WamBam VF14300 User manual
WamBam
WamBam SLIM JIM User manual
WamBam
WamBam HANDY ANDY User manual
WamBam
WamBam Nervous Nelly Vinyl Gate User manual
WamBam
WamBam BL19101 User manual
WamBam
WamBam BL19042 User manual
