warmer TYD193-137-2D6C Series Installation instructions

LUXURY FITTED
HEATED BLANKET
---------------------------------------------------------------------------------------------------
EN USER INSTRUCTION & OPERATION MANUAL
ES MANUAL DE INSTRUCCIONES Y OPERACIONES PARA EL
USUARIO
DE BENUTZERANLEITUNG & BETRIEBSANLEITUNG
FR MANUEL D'UTILISATION ET D'UTILISATION
IT ISTRUZIONI PER L'USO E MANUALE OPERATIVO
MACHINE
WASHABLE
OVERHEATING
PROTECTION
TIMER
UP TO 12
HOURS
HEAT SETTINGS
9
EN

Thank you for purchasing this NETTA product.
Please read the user manual carefully before operating this
appliance.
We will update our instruction manuals if necessary.
For the most up-to-date user manual, please visit our official
website: www.nettadirect.com.
You can download a copy of up to date user manuals at any time
in electronic format. We do not supply you with a paper-based
user manual after each revision.
Require a larger version of this
Instruction Manual?
Please download electronically
from our website and use PDF
reader on your device to enlarge
the text if needed.
www.nettadirect.com

Safety and Warnings
Intended Use
This product is for domestic and indoor
use only.
General Warnings
•If the electric blanket is folded, crumpled or used abnormally, the
blanket can overheat which will activate the permanent protection
function. This cannot be repaired at home and the product must be
returned to the retailer.
•If the power supply for the electric blanket is lower than the
recommended voltage, the temperature of the blanket will rise
slowly, and the heating ability is relatively low. This is not a
malfunction of the blanket and the user should pay attention to the
voltage of the supply socket.
•Use only as an under blanket (use similar to a bedsheet, not a
duvet).
•Ensure the electric blanket can be laid flat on your mattress.
•Do not use pins on the appliance. Do not scratch with sharp objects
or beat the object with blunt devices. Do not attempt to secure the
electric blanket with pins or other metal objects.
•Use the electric blanket under the body only. Do not wrap your body
with the blanket or use in any other way.
•Do not turn on the electric blanket when there are heavy objects or
folded bedding on it to avoid it overheating.
•Do not expose the electric blanket to direct sunlight.
Regular Check-Ups
Ensure the power cable and
plug are not damaged before
plugging into a socket.

General Warnings
•Do not iron the blanket and avoid damaging the insulation of the
heating wires.
•Do not use with any other heating appliances e.g., hot water bottle.
•Do not use with anything that can start a fire on the bed such as
cigarettes, sparks, etc.
•Switch off the blanket or pull the plug when leaving the house or not
using the blanket.
•Do not dry clean this electric blanket.
•Children under 3 should not use this appliance due to their inability
to react to overheating.
•After the electric blanket has been turned on, users should
supervise it for an hour to prevent any possible fire.
•This product is not intended for medical use in hospitals.
•Wash by hand or machine. Do not use if wet. See ‘Cleaning,
Storage and Maintenance’ for further instructions.
•Do not let the control unit or power cord get wet.
•When not in use, the blanket should be stored in a dry place. When
storing the appliance, allow it to cool down before folding. Do not
crease the appliance by placing items on top of it during storage.
•After storing, the blanket should be carefully checked before use to
make sure the control or cords are safe. Do not switch on the
power when the blanket is not totally safe.
•Do not attempt to perform any repairs on the electric blanket
yourself.

•The power cord of the appliance can be changed. If the cord is
damaged, please contact the manufacturer.
•Do not use the electric blanket on an adjustable bed.
•If a heating wire has been cut, do not attempt to repair it by
yourself. Please contact the retailer in this circumstance.
•Do not try to repair a fuse link or thermal link. The appliance must
be returned to the retailer if a link has ruptured.
Users must observe all the above points. Failure to do so may
result in the blanket overheating which could result in a fire,
bodily injury, or property loss.

Operating the Product
Using the Product
•To fit the controller plug, simply hold the socket with one hand and
push the controller plug all the way until it is firmly in place.
•To remove the controller, lift the locking tab up with your finger and
pull the plug directly out. Do not pull the controller cable and do not
try and pull the controller plug out without lifting the locking tab as
you will damage the socket.
•Do not fold, roll or kink the cable. Allow it to hang freely.
•Ensure the cable in not pulled so tight that it bends hard at the
blanket connector end.
•Ensure that the electric blanket is sized to suit your mattress.
•Do not use a single blanket on a double, queen, king, or super king
mattress.
•The blanket top must not hang over the edges of the mattress.

Securing your Electric Blanket
•Your electric blanket must be placed directly onto the mattress.
Mattress protectors must be fitted over the electric blanket.
•Place the blanket onto the mattress with the controller connections
at the head end of the bed.
•Electric blankets must not be used on top of the user (as with
normal blankets), instead they must be firmly secured to the
mattress.
•Fit the side skirts around the edges of the mattress then use the
elastic skirt to ensure that the blanket fits snugly around the sides
and underneath the mattress.
•Spread the skirt around the mattress edge ensuring even tension
and making sure the blanket is placed evenly over the mattress
then ensure that the blanket is flat and crease free.
•Failure to follow these fitting instructions may trigger the overheat
protection system and render the blanket permanently inoperative.
This will invalidate the warranty.
•The electric blanket should not be tucked in at the sides.
•Make your bed in the usual manner.
•After the blanket is secure and fitted correctly, plug the controller
into the wall power socket and turn on.
•Do not cover the controllers at any time.
•Keep the controller away from external heat sources.

Using the Controller
•Do not use any other controllers for this blanket.
•The on/off switch is on the right-hand side of the controller. Push
upwards is ‘on’ and push downwards is ‘off’.
•Press ‘body’ or ‘feet’ to adjust the temperature.
•Press ‘body’ and the displayed temperature circulates from 0-9.
•Press ‘feet’ and the displayed temperature circulates from 0-9.
•When setting at a high temperature (5-9), it will automatically
change to a lower temperature after three hours.
•Press ‘time’ to select the desired setting (1-12 hours). When the
timer runs out, it will change to standby.
•Press ‘auto’ and it will automatically set heat setting 5 for three
hours.
•If the controller shows ‘P’, it is possible that the controller coupler is
not connected.
•If the controller shows ‘E’, please shut down and then restart. If it
still occurs, this indicates that the internal connection has short
circuited and that the blanket is damaged.
Preheating the Blanket
•The controller has a pre-heat facility in order for you to warm your
bed prior to getting into it.
•The time taken to preheat the bed will depend on the ambient
temperature of the bedroom and whether an electric blanket has
been used on the bed on a regular basis.

•At normal ambient temperature, you should allow approximately 30-
60 minutes on heat setting ‘9’.
•You may get into bed while the blanket is still warming up, but
please do not leave the blanket setting on ‘9’ when you are in bed
as this is intended to be a preheat setting.
•A cold room or bed that has not been used for some time may
require a greater length of time to preheat.
Electrical Field Effect
•When using the blanket, you may feel a tingling sensation. This is
known as an ‘electric field effect’ and happens throughout all
brands of electric blanket.
•It is caused by an electromagnetic field (EMF) and some people are
more susceptible to feeling it than others. It is no cause for concern
and is not an electric shock.
Overheat Protection System
•The blanket is fitted with numerous overheat safeguard systems.
This offers protection against overheating or damage to the
elements by disengaging the power to the elements before
overheating hazards occur.
•Should there ever be a problem with the heating element in the
blanket, it will automatically close down the operation and the
blanket will turn off.
•The controller must not be covered. The controller has built-in
protection, so that if the controller overheats or the heating element
is damaged, it will automatically close down the operation
permanently.
•Keep the controller away from external heat sources.

Cleaning, Maintenance and Storage
•Do not dry clean, wring or spin dry.
•Ensure all controllers are unplugged from the power point and from
the electric blanket before cleaning.
•Ensure the controllers and plugs do not get wet.
•Machine wash on delicate cycle only or hand wash at 30°C max.
•Do not bleach or use detergents with bleach.
•Do not tumble dry.
•Line dry in shade only over several lines. Do not use pegs.
•Do not iron.
•Do not operate when folded.
Handwashing
•Never use hot water as this may shrink the blanket and void the
warranty.
•Place the blanket in lukewarm water mixed with either a natural wool
detergent or with mild soap flakes.
•Soak the blanket for approx. 5 minutes and then gently squeeze the
soapy water through.
•Rinse the blanket thoroughly with clean lukewarm water until no
more suds are visible and allow water to drain off.
•Refer to the drying section for drying instructions.
•With normal use, it is recommended that you hand wash your
blanket once per year.

Machine Washing
•Place the blanket in the washing machine with either a natural wool
detergent or with mild soap flakes.
•Set your machine to the delicate wool or gentle cycle (without spin
dry) and set the water temperature to warm (30°C max).
•When the cycle has finished, allow water to drain off.
•Refer to the drying section for drying instructions.
Drying
•Spread the blanket out on a clean surface to dry in a shady area.
•Your blanket can also be dried on a clothesline provided the blanket
is not creased or folded.
•Ensure pegs are not used on the heating element areas of the
blanket if hanging on the line. The blanket must be thoroughly dried
including controller sockets before being re-fitted to your bed.
Servicing
•There are no user serviceable parts on this blanket.
•The blanket should be examined frequently for signs of wear, either
of the blanket, controller or flexible cord. If wear is visible or if any
abnormality or defect in operation is observed, discontinue use
immediately.
•It is recommended that your electric blanket is inspected by a
qualified person after three years of use.

Storage
•When storing the blanket, allow it to cool down before folding. Fold
neatly (or rolled) but not tightly without sharp bends in the heating
elements and store where no other heavy objects will be placed
upon it.
•Store in a dry place where it cannot be damaged.

Spare Parts and Repairs
To order replacement parts, please go to www.nettadirect.com/parts.
You will need PDC information from your product, user manual or
carton box. Alternatively, go to our website and use search bar to find
the parts available.
You can also find this code on the back of this User Manual.
For our Repair Service, please contact our customer support with email
on [e-mail] they will provide with more details of
repair service with NETTA.
Disposal of Product
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF
THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE
2002/96/EC.
DISPOSAL:
Please dispose of this product responsibly. This item cannot be
disposed of with general waste. Please contact your local
council authority for more information on how to dispose this
product. If this product is disposed of with general waste, it will
end up in a landfill and will leak hazardous substances into the
groundwater –effecting our food chain.
Your Warranty
If you purchased with NETTADIRECT, or one of our authorised
resellers, you will automatically enrol your warranty for 1 (ONE) year.
You do not need to register again for your warranty. All warranties will
be carried out to our terms and conditions including warranty conditions
you will find out from our website at www.nettadirect.com.

Copyrights
NETTA and its logo including images and contents in this manual and
website is copyrighted. All intellectual property rights belong to NETTA
owner CONSUMABLE DIRECT LIMITED.
ANY UNAUTHORISED USE, MODIFICATION or DISTRIBUTION of
the NETTA logo, website image, and its contents (from website,
manuals) will violate worldwide copyright, trademark, and associated
laws.
We reserve the right to proceed with lawsuits to anyone who is found
breaching our copyrights policy. For more details, please check our
website copyright policy for more information.
Product Dependency Code (PDC)
Your PDC is below:
NETTA is a registered trademark of CONSUMABLE DIRECT LIMITED.
Product Produced for CONSUMABLE DIRECT LIMITED M32 0JT U.K.
Printed in China
PDC: TYD193x137-2D6C / TYD203x152-2D6C / TYD203x182-2D7C
SKU: 103493 / 103494 / 103495