Warmhaus Flat User manual

VERTICAL PANEL
RADIATOR INSTALLATION
AND OPERATION
MANUAL

2
Vertical Flat Panel
Standart (Standard)
Type De Ligne (Line)
Type Plate (Flat)

3
VERTICAL PANEL RADIATOR INSTALLATION
AND OPERATION MANUAL
Dear customer,
Thank you for choosing the Warmhaus radiators.
These products are manufactured according to the TS 442 standard in a
production plant respecting the quality assurance system and certified
TSE ISO EN 9001-2008, TSE ISO EN 14001-2004, TSE EN 442, GOST-R,
UKR-SERPO, DIN EN 442, NF Mark (NF-047) CE, PZH
Respect for advice with the installation and operating instructions in
this manual will guarantee the sustainable functioning of the products.

4
VERTICAL ASSEMBLAGE OF RADIATORS:
Radiators should be carried and assembled
without being unpacked. The unpacked
radiators must not be carried by being hold
by custards aside.
3. The stocking must be made in a ventilated
and dry place without unpacking radiators.
4. In the course of stocking, radiators must
be stacked by no more than 10 pieces.
5. The maximum functioning pressure of
radiators is 10 Bars.
6. Radiators are delivered with assemblage
accessories: 3 stoppers, 1 drain and fixing
pins with ankles and screw factories. These
accessories must have to be assembled in
accordance with the figure 1. The fixing pins
must be fixed in order to guarantee stability
and to support the weight of the filled
radiator.
a) The Warmhaus Radiators have to be
assembled by using the delivered fixing pins
(see it in the Figure 1).
b) The position of the fixing pins in comparison
with the radiator is noted in the Figure 1. The
minimal distance between radiator and floor
should not be less than 100 mm.
c) Having drawn on the wall, the position of the
fixing pins and of installed plugs, to take up
the lower pins of the radiator. Assembly
then, the top hanger brackets without
tightening the screws.
7. The warranty period is 10 years from the
date of delivery.
ATTENTION THE POSITION OF THE LEGS OF
FIXING MUST RESPECT COAST B OF THE FACE
1 THERE.
d) After positioning of the radiator, tighten the
top hanger brackets.
e) Assembly the stoppers after the chosen
assemblage chosen as well as the air vent
plugs which will be imperatively on the
upper part of the radiator.
f) Connect the feeding of the installation by
taking care to allow these ones to dilate
without putting pressure on the radiator.
ATTENTION !
• This product is only conceived to be used a
system of central heating or a system of hot
water tank of central heating, with a purpose
to guarantee a residential heating or an
individual heating.
• The assemblage of this product must be made
by a competent skilled person in this activity.
• Control if the radiator which you received is a
good model and, if it has good dimensions
before unpacking.
• Do not throw the packing before having
proved that the small packet containing the
linking and assemblage rooms is in your
possession.
• We recommend you to take personal security
measures in the course of radiator
assemblage.
The necessary specifications of the water used in
a radiator have to be:
a) pH: minimum 9,5 - maximum 11,5
b) Complete hardness: maximum 30 ppm
CACO3
c) An oil dumping device must be set up on
heating circuit to have no air and oxygen
presence in the radiator.
Hardness of the water used in the circuit of a
central heating should not be higher than
aforementioned value. If the hardness of the
used water is higher than aforementioned value
a corrective action or a treatment will have to be
set up.
The deterioration of the radiator due to
dierent problems of water cancels
the guarantee.
1. Do not unpack radiators in the course of
construction work or renovation and as long
as painting, coating or other jobs are finished.
You can take radiators up, if necessary,
without unpacking them.
2. Pay attention to the fact that the products are
not thrown on the facedown, in the course of
manipulation and assemblage.

5
Figure 1 - Measures for a vertical assemblage of a radiator
g) Put into water and control the absence of
escape.
h) This operation must be performed by a skilled
personnel.
i) The connection pieces must not be tightened
in an excessive way.
A B
1
300-400
60
2
500-600
90
3
700-750 130
4900 180
C D E F
11400 40 1305 55
21500 40 1405 55
31600 40 1505 55
41800 40 1705 55
52000 40 1905 55
62200 40 2105 55
C
A
B
B
50
25
A/2
30 30
G1/2
82
E
D
F
100 min.
111-126
Lower hanger bracket
G3/4
Top hanger bracket
Air vent plug
Blanking plug
Blanking plug Blanking plug
Blanking plug Air vent plug

6
Figure 2 - List of assemblage accessories
Air vent plug
Blanking plug
3
1
Top hanger
bracket
4
2
2
4
Screw
Fixing Wall
Plug
Lower hanger
bracket
DYSFUNCTIONS EXCLUDED FROM
THE RANGE OF GUARANTEE:
• Any dysfunction due to a use not in
accordance with notice. Any faulty
assemblage, any damage and dysfunctions
emerging from a faulty installation.
• Any damage and any dysfunctions
dysfunctions resulting from a load, transport,
emptying, stocking and assemblage, after
delivery of goods.
• Any damage and dysfunctions resulting
from external elements such as fire and
thunderbolt, inundation and natural
disasters.
• Any damage resulting from a use with an
installation of which pressure is superior to
10 bars.

7
Figure 3 – Installation Drawings
CONNECTIONS
AB
C
D
• Any dysfunctions resulting from a use of the
product not correspondent to its destination.
• Any coating deterioration due to a cleaning
material containing the acidic or corrosive
agent.
• Any dysfunctions resulting from particles,
mud, limestone etc in the water coming from
the installations.
• In case of outdated delay of guarantee or
falsification on the certificate of guarantee.
• Any damage from frost.
• Any damage and any dysfunctions emerging
from use outside.
• Any dysfunctions resulting from a non-use
of Warmhaus spare parts or from a
modification of products without
Warmhaus’s information and approval.
• Any dysfunctions caused by a maintenance
or repair made by none permitted persons.
• Any deterioration and other damages
caused by any long-term stocking in a
construction site.
• Non-statement of certificate of guarantee
and of bill of the product.
• Any dysfunctions caused by troubles
emerging from an installation of conduit and
of fittings.
• Any dysfunctions resulting from of the
absence of periodical discussions and of
cleaning conditions.
• Any dysfunctions caused by an
incompatible use of the product
concerning the normal operation pressure
between 0.5 and 10 Bars.
• Any damage which could result from the
water temperatures of network or of
ambient air not between 5°C and 80°C.
• Any deterioration due to a corrosive
atmosphere: deficient aeration, steam with
chemical agents or other aggressive
products.

VERTICAL PANEL
RADIATOR INSTALLATION
AND OPERATION
MANUAL
Nilüfer Organize Sanayi Bölgesi
Selvi Cadde No:3 16140 BURSA/TÜRKİYE
T+90 (224) 295 94 00
F+90 (224) 411 23 77
www.warmhaus.com
(BLYSS-T20) Vertical Panel Radiator Installation & Operation Manual Code: 15010606006750 (Rev. No:01 / Rev. Date: 31.10.2022)