Warn Industries 30279 User manual

kgf
mm
mm
mm
mm
kgf
kg
m
N*m
lbf kN m/min ft/min m/min ft m
17500 33.4 10.7 47.0 14.3 25 7.6
26400 28.5 12.5 55.0 16.8 54 16.5
35585 24.8 14.4 63.1 19.2 88 26.8
44953 22.0 16.2 71.1 21.7 126 38.4
* Never exceed the Rated Pulling Force. Installation of a Rated Capacity Limiter is recommended.
Duty Cycle
lbf kgf BAR min/10min
0 0 27.6 N/A
1500 680 55.8 N/A
3000 1361 88.9 N/A
4500 2041 120.7 N/A
6000 2722 151.7 N/A
7500 3402 (1) N/A
9000 4082 (1) N/A
Performance By Layer- 3/8" (9.5 mm) dia. rope
47.1
53.1
Contactor / Remote Type: N/A
BAR
Line Load
in
psi
400
psi
Pressure Drop at 15 GPM
ft*lbf
ft
Line Speed 15 GPM
209
in
253
4 (with 3/8" dia. rope)
in
12.7
lbf
6849
93
912486.C0 11/2011
linespeed graph
pressure drop graph
Customer Service (North America): 1.800.543.9276
Customer Service (International): 1.503.722.3008
FAX: [phone] www.warn.com
73.8
12900 S.E. Capps Road,
Clackamas, OR USA 97015
(1)
2600
105.5
First Layer Performance
Pressure Drop at 10 GPM
250
Line Speed 10 GPM
ft/min
35.0
41.1
44.1
1750
17.2
2903
1290
810
2533
3402
Drum Layer
(1)
137.9
1530
640
(1)
2200
(1)
2000
1070
179.3
Part Number
Model
Series 9-A-30
Hydraulic Winch
Manual Clutch
The Series 9 hydraulic winch features a 2-stage planetary gear train with a
total reduction of 27:1. This winch uses a heavy duty automatic disc brake
and a locking clutch lever. The 4'' (102mm) steel drum provides excellent
durability for the wire rope. Designed to meet SAE J706 and CE standards.
Due to the hydraulic motor sizing, this winch is designed for increased
linespeed with a Rated Pulling Force of 7500 lbf (3402 kgf).
Motor Type
Hydraulic
3.0 ci
(50 cc)
30279
WARN Industrial Winch
product photo
31149
24336
30859
38316
71370
23674
Part Number
Description:
Wire Rope Tension Plate 10''
Fairlead Black 10"
Fairlead Chrome 10"
Remote Clutch Mechanical
Remote Clutch Air
Wire Rope Assembly 3/8''x125' EIPS
WARN INDUSTRIES, INC
Industrial Products
drum rotation image
Drum Barrel Diameter:
1/2
15,100
Recommended Minimum Wire Rope Breaking Strength:
Brake Type: Disc
Gear Reduction: 36 :1
Drum Capacity
Rated Pulling Force:
Distance Between Flanges:
Duty Cycle (intermittent per SAE J706 section 6.2):
Approximate Shipping Weight:
Drum Flange Diameter:
8.24
Recommended Maximum Wire Rope Diameter:
102
Mounting Bolt Torque:
Maximum Layers of Wire Rope:
Viewed from Motor End
2247
kgf
Line Load *
Accessories
4.00
9.95
7500
1. -SAE J706
2.-CE Machinery Directive 98/37/EC and
2006/42/EC
305
80.0
lb
35 - 40
Disk
Standards
Compliance
27:1
Engineering Data
Drum Rotation
lbf
3402
in
47 - 54
36.3
0.0
20.0
40.0
60.0
1 2 3 4 5
Line Speed (ft/min)
Layer
15 GPM
10 GPM
0
500
1000
1500
2000
2500
0 3000 6000 9000
Pressure Drop (psi)
Line Load (lbf)
15 GPM
10 GPM

Maximum System Pressure: 2600 psi 179 BAR
Maximum Motor Pressure Drop: 2600 psi 179 BAR
Maximum Rated Input Flow: 15 GPM 57 LPM
30279
Part Number
Feet down
image
Pull from top of winch
Feet forward
Pull from top of winch
912486.C0 11/2011
12900 S.E. Capps Road,
Clackamas, OR USA 97015
Customer Service (North America): 1.800.543.9276
Customer Service (International): 1.503.722.3008
FAX: [phone] www.warn.com
WARN INDUSTRIES, INC
Industrial Products
image
Notes: (1) Do Not Exceed 2600 psi motor pressure drop.
(2) Drum rotates clockwise with Port A pressurized when viewed
from gearbox end.
Feet down without angle brace
image
image
Angle Braces Only
Control Valve Type:
3-position, 4-way, closed
center, spring return
(cylinder spool)
Pull from top of winch
image
Control Valve Schematic
Feet forward
Feet down with angle brace
image
schematic
WARN Industrial Winch
Motor / Contactor may be rotated in 180 degree increments. Clutch housing may be rotated in 72 degree increments.
outline drawing
Series 9-A-30
Hydraulic Winch
Manual Clutch
Pull from bottom of winch
Motor Type
Hydraulic
3.0 ci
(50 cc)
Units are given in inches [millimeters], unless otherwise specified
Pull from top of winch
Pull from bottom of winch
Recommended Mounting- Always Observe Correct Drum Rotation
Hydraulic System Specifications
Model