Wasserstein DARTWOOD Wax Warmer User manual

Wax Warmer
User Manual

1 x wax warmer
4 x bags of wax beads
(100g/bag)
10 x application
sticks
In the Box
Warning
Page 1
•
•
•
•
Wax warmer unit gets very hot. Children should never be left unattended
when this device is on or plugged in.
Keep away from other heating sources while in use, such as portable
heaters, radiators, stoves, open flames, etc.
Keep away from dust, dirt, smoke, chemical/corrosive materials, and water.
Make sure to clean and store safely after use.
Setup
1. Take off the lid from the wax warmer.

Page 2
2. Take out the heating pot.
3. Open a bag of wax and pour your preferred amount into the heating pot.
Put the heating pot back into the wax warmer.
4. Cover with the lid.

Page 3
5. Plug the wax warmer directly into an outlet.
6. Turn the dial at the front to your preferred heating level.
7. Wait for the wax to melt down to a gooey consistency. Remove the lid and
check with one of the application sticks.

Page 4
Applying the Wax
1. Once the wax has melted down, dip the application stick into the wax and
get a glob on the end of the stick.
2. Apply to your preferred area of your body.
3. Once the wax has dried on your body, peel it off in one quick motion.

Max. operating power:
Input voltage:
Input frequency:
Weight:
Materials:
Color:
100 W
110 - 240 V
50 / 60 Hz
1.1 lb
Metal, plastic
Black
Specifications
Get More Support
Scan the QR code below or email us at:
[email protected]
www.wasserstein-home.com
Made in China