Wasserstein Noorio Spotlight Cam B210 User manual

Solar panel for Noorio Spotlight
Cam B210
USER MANUAL
Smart Home. Smart Living.
®

Page 1
1 x set of screws
and wall anchors
360° mounting
bracket
solar panel
In the Box
1. Do not open or dismantle the solar panel for any reason.
2. Keep the solar panel away from any heat source like a furnace, heater,
or grill.
3. Make sure that the outdoor charging cable is properly attached to your
camera.
4. Do not bend, stretch, or cut the charging cable.
• Fully charge the Noorio Spotlight Cam B210 before connecting it to
the solar panel.
• Mount the solar panel in a place that gets direct sunshine.
Important Note
Warning

1. Mark the holes using the bracket for guidance.
3. Insert the anchors and screw the mount to the wall.
Installing Solar Panel
Page 2
2. Drill the holes.

Page 3
4. Slide the solar panel onto the mounting piece.
The 360-degree rotatable mounting bracket allows you to adjust
the solar panel in the best position to absorb sunlight.
Adjusting Solar Panel

Page 4
1. Open the rubber cap at the back of your camera, and plug the cable
firmly into the port.
2. Go to the Noorio Spotlight App, press the icon and then select
"Power Management".
Please select "Solar Panel" at the Power Source.
Remarks: If it keeps at "Battery", it will drain the camera battery when
there is no sunshine.
Connecting and Setting up the Camera

Page 5
Specifications
Dimensions:
Power:
Voltage:
Outdoor cable length:
Materials:
7.5 x 4.37 x 0.79 in
2 W
5 V DC
13 ft
ABS
3. Place the solar panel under direct sunlight to continuously charge your
camera.

Get More Support
Scan the QR code below or email us at
[email protected].
Noorio Spotlight Cam B210 is not included.
Noorio Spotlight Cam B210 is a trademark of Noorio Innovations Ltd.
Wasserstein is not affiliated with Noorio Innovations Ltd.
Wasserstein is a trademark of Dropcases Ltd.
Made in China Smart Home. Smart Living.
®