Watchguard XCS Series Installation instructions

WatchGuard
®
XCS
Hardware Guide
XCS 280, 580
BL5E4E3

ii WatchGuard® XCS
ADDRESS
505 Fifth Avenue South
Suite 500
Seattle, WA 98104
SUPPORT
www.watchguard.com/support
U.S. and Canada +877.232.3531
All Other Countries +1.206.521.3575
SALES
U.S. and Canada +1.800.734.9905
All Other Countries +1.206.613.0895
ABOUT WATCHGUARD
WatchGuard offers affordable, all-in-one network and content security solutions that
provide defense-in-depth and help meet regulatory compliance requirements. The
WatchGuard XTM line combines firewall, VPN, GAV, IPS, spam blocking and URL
filtering to protect your network from spam, viruses, malware, and intrusions. The new
XCS line offers email and web content security combined with data loss prevention.
WatchGuard extensible solutions scale to offer right-sized security ranging from small
businesses to enterprises with 10,000+ employees. WatchGuard builds simple, reliable,
and robust security appliances featuring fast implementation and comprehensive
management and reporting tools. Enterprises throughout the world rely on our
signature red boxes to maximize security without sacrificing efficiency and
productivity.
For more information, please call 206.613.6600 or visit www.watchguard.com.
Copyright Information
Copyright© 2013 WatchGuard Technologies, Inc. All rights reserved.
WatchGuard, the WatchGuard logo, LiveSecurity, and any other mark listed as a trademark in the “Terms of Use” portion of
the WatchGuard Web site that is used herein are either registered trademarks or trademarks of WatchGuard Technologies,
Inc. and/or its subsidiaries in the United States and/or other countries. All other trademarks are the property of their
respective owners.
Part Number: 275-4475-001 Rev C
Revised: August 29, 2013
Notice to Users
Information in this guide is subject to change without notice. Updates to this document are posted on the WatchGuard
web site, at http://www.watchguard.com/help/documentation. Companies, names, and data used in examples herein are
fictitious unless otherwise noted. No part of this guide may be reproduced or transmitted in any form or by any means,
electronic or mechanical, for any purpose, without the express written permission of WatchGuard Technologies, Inc.
Complete copyright, trademark, patent, and licensing information can be found in
the WatchGuard product documentation. You can find this document online at:
http://www.watchguard.com/help/documentation/

Hardware Guide 1
Hardware Specifications
The WatchGuard® XCS appliance is an easy-to-use, all-inclusive email and web appliance that provides
security and privacy of inbound and outbound traffic. It is the first product that provides correlated content
security and threat prevention with consolidated administration and reporting across multiple protocols.
The WatchGuard XCS provides content security that enables data loss prevention, encryption and content
filtering with integrated threat prevention for viruses, spam, spyware, phishing, and malware attacks, all in a
secured appliance.
Secure Operating System
The WatchGuard XCS delivers the most complete security available for messaging systems. The appliance runs
on a customized secure operating system that does not allow uncontrolled access to the system. There is no
command line access and the WatchGuard XCS runs as a closed system, preventing accidental or deliberate
misconfiguration by administrators, which is a common cause of security vulnerabilities.
Package Contents
XCS device
Quick Start Guide
Hardware warranty card and LiveSecurity® Service activation card
Power cord
Ear Bracket Screw Set

Hardware Specifications
2
About Your Hardware
Hardware Specifications
XCS 280 XCS 580
Processor Single Core 2.6GHz Intel E5300 800
FSB, LGA775, 2M Cache
Dual Core 2.6GHz Intel E5300 800
FSB, LGA775, 2M Cache
Memory 4GB (1 x 4 GB)
DDR3 STD DIMM
4GB (1 x 4 GB)
DDR3 STD DIMM
Hard Drives 320 GB SATA 320 GB SATA
Power
supply
Universal Power Supply 220W,
100–240 VAC, 1.2A MAX, 50/60 Hz,
Autosensing
Universal Power Supply 220W,
100–240 VAC, 1.2A MAX, 50/60 Hz,
Autosensing
Network
Interfaces
3 x Intel 82583V GBe (Onboard) 3 x Intel 82583V GBe (Onboard)
USB Ports 2 x USB ports 2 x USB ports
I/O
Interfaces
1 x SATA
1 x PS/2 Mouse
1 x PS/2 Keyboard
1 x VGA DB15
1 x Serial DB9
1 x SATA
1 x PS/2 Mouse
1 x PS/2 Keyboard
1 x VGA DB15
1 x Serial DB9
Dimensions D=10.9” (305 mm)
W=16.9” (431 mm)
H=1.7” (44 mm)
D=10.9” (305 mm)
W=16.9” (431 mm)
H=1.7” (44 mm)
Weight 15.4 lbs (7 kg) 15.4 lbs (7 kg)

Hardware Guide 3
Hardware Specifications
Environmental Requirements
To safely install your XCS device, we recommend that you:
Install it in a network rack.
Put it in a secure area, such as a locked room, to keep the device from people who do not have
permission to use it.
Connect it to a conditioned power supply to prevent damage from sudden power changes.
Other environmental requirements for the WatchGuard XCS device:
Operating temperature 0 – 40°C (32 – 104°F)
Non-operating temperature –20 – 70°C (–4 – 158°F)
Operating and Non-operating
relative humidity
5% – 90% Non-condensing

Hardware Specifications
4
Hardware Description
Front View
The front of the XCS device.
This is a close-up of the LED panel.
Power Button
Press the power button to power on and off the device. Before you power off your device, make sure
your operating system is correctly shut down. Hold the power button for at least five seconds to force
a power off.
Power Indicator
The power indicator lights when power is supplied to the device and the device is operational.
Hard Disk Activity
The hard disk activity indicator flashes when the disk drive is active.
Network Interface Activity (NIC1)
The network interface activity indicators flash when network activity is detected on the first onboard
network interface.
Network Interface Activity (NIC2)
The network interface activity indicators flash when network activity is detected on the second
onboard network interface.
Network Interface Activity (NIC3)
The network interface activity indicators flash when network activity is detected on the third onboard
network interface.

Hardware Guide 5
Hardware Specifications
Rear View
This is a close-up of the rear of the device.
PS/2 Ports
Two PS/2 ports are available to connect a keyboard and mouse for use with the XCS device console.
USB Interfaces
There are two USB interfaces that support additional peripherals, for example a USB keyboard (for use
with the XCS device console), and a USB DVD/CD-ROM drive.
Serial Port
You can use a DB9 connector for the serial port (COM1) to connect a UPS (Uninterruptible Power
Supply). The serial port can also be used to connect to the serial console if you do not have a monitor
and a keyboard.
VGA Video Interface (Console)
You can use the VGA video connector to connect a monitor and view the XCS device console screen.
AC Receptacle
Accepts a detachable AC power cord supplied with the device.
Power Supply Fan
The fans decrease the internal temperature of the device.
Caution
You must disconnect the power supply before you remove the cover of the XCS device.
If you open the cover without prior authorization from WatchGuard, the Hardware Warranty
is voided.

Hardware Specifications
6
Network Interfaces
This is a close-up of the network interfaces on the rear of the device.
Onboard Network Interfaces
The XCS device has three onboard network interfaces. The network interfaces have standard RJ45
connectors.
Network Interface Indicators
Each network interface has a pair of indicators. The left indicator is the activity indicator for the
interface. The right indicator shows the connection speed for the interface.
Indicator Indicator Color Interface Status
Activity (Left) Not lit No connection
Amber Connection established
Blinks Network activity, data sent and
received
Connection Speed
(Right)
Not lit Operates at 10 Mbps or no link
Green Operates at 100 Mbps
Amber Operates at 1000 Mbps

Hardware Guide 7
Hardware Specifications
Rack Mount Instructions
When you install the XCS device in a rack, make sure you consider:
Elevated Operating Ambient Temperature
If you install the XCS device in a closed or multi-unit rack assembly, the operating ambient
temperature of the rack environment could be greater than the ambient temperature of the room.
The XCS device is certified to operate correctly between 32–104°F (0–40°C).
Reduced Air Flow
When you install the XCS device in a rack, make sure that the amount of air flow required for safe
operation of the equipment is not compromised.
Mechanical Loading
When you mount the XCS device in the rack, avoid hazardous conditions caused by an uneven
mechanical load.
Circuit Overloading
Make sure you connect the XCS device to the power supply circuit in such a way that no circuits are
overloaded and there is no impact on overcurrent protection and supply wiring.
Reliable Grounding
Make sure all rack-mounted equipment is correctly grounded. For example, use power strips instead
of direct connections to the branch circuit.

Hardware Specifications
8

Hardware Guide 9
Legal and Regulatory Information
Limited Hardware Warranty
This Limited Hardware Warranty (the “Warranty”) applies to the enclosed WatchGuard hardware product, not including
any associated software which is licensed pursuant to a separate end-user license agreement and warranty (the
“Product”). BY USING THE PRODUCT, YOU (either an individual or a single entity) AGREE TO THE TERMS HEREOF. If you do
not agree to these terms, please return this package, along with proof of purchase, to the authorized dealer from which
you purchased it for a full refund. WatchGuard Technologies, Inc. (“WatchGuard”) and you agree as set forth below or on
the reverse side of this card, as applicable:
1. LIMITED WARRANTY. WatchGuard warrants that upon delivery and for one (1) year thereafter (the “Warranty Period”):
(a) the Product will be free from material defects in materials and workmanship, and (b) the Product, when properly
installed and used for its intended purpose and in its intended operating environment, will perform substantially in
accordance with WatchGuard applicable specifications.
This warranty does not apply to any Product that has been: (i) altered, repaired or modified by any party other than
WatchGuard except for the replacement or inclusion of specified components authorized in and performed in strict
accordance with documentation provided by WatchGuard; or (ii) damaged or destroyed by accidents, power spikes or
similar events or by any intentional, reckless or negligent acts or omissions of any party. You may have additional
warranties with respect to the Product from the manufacturers of Product components. However, you agree not to look
to WatchGuard for, and hereby release WatchGuard from any liability for, performance of, enforcement of, or damages or
other relief on account of, any such warranties or any breach thereof.
2. REMEDIES. If any Product does not comply with the WatchGuard warranties set forth in Section 1 above, WatchGuard
will, following receipt of the product you claim is defective and at its option, either (a) repair the Product, or (b) replace
the Product; provided, that you will be responsible for returning the Product and for all costs of shipping and handling.
Repair or replacement of the Product shall not extend the Warranty Period. Any Product, component, part or other item
replaced by WatchGuard becomes the property of WatchGuard. WatchGuard shall not be responsible for return of or
damage to any software, firmware, information or data contained in, stored on, or integrated with any returned Products.
3. DISCLAIMER AND RELEASE. THE WARRANTIES, OBLIGATIONS AND LIABILITIES OF WATCHGUARD, AND YOUR REMEDIES,
SET FORTH IN PARAGRAPHS 1 AND 2 ABOVE ARE EXCLUSIVE AND IN SUBSTITUTION FOR, AND YOU HEREBY WAIVE,
DISCLAIM AND RELEASE ANY AND ALL OTHER WARRANTIES, OBLIGATIONS AND LIABILITIES OF WATCHGUARD AND ALL
OTHER RIGHTS, CLAIMS AND REMEDIES YOU MAY HAVE AGAINST WATCHGUARD, EXPRESS OR IMPLIED, ARISING BY LAW
OR OTHERWISE, WITH RESPECT TO ANY NONCONFORMANCE OR DEFECT IN THE PRODUCT (INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ANY IMPLIED
WARRANTY ARISING FROM COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE, ANY WARRANTY OF
NONINFRINGEMENT, ANY WARRANTY OF UNINTERRUPTED OR ERROR-FREE OPERATION, ANY OBLIGATION, LIABILITY,
RIGHT, CLAIM OR REMEDY IN TORT, WHETHER OR NOT ARISING FROM THE NEGLIGENCE (WHETHER ACTIVE, PASSIVE OR
IMPUTED) OR FAULT OF WATCHGUARD OR FROM PRODUCT LIABILITY, STRICT LIABILITY OR OTHER THEORY, AND ANY
OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY FOR LOSS OR DAMAGE TO, OR CAUSED BY OR CONTRIBUTED TO BY,
THE PRODUCT).

Legal and Regulatory Information
10
4. LIMITATION AND LIABILITY. WATCHGUARD’S LIABILITY (WHETHER ARISING IN CONTRACT (INCLUDING WARRANTY),
TORT (INCLUDING ACTIVE, PASSIVE OR IMPUTED NEGLIGENCE AND STRICT LIABILITY AND FAULT) OR OTHER THEORY)
WITH REGARD TO ANY PRODUCT WILL IN NO EVENT EXCEED THE PURCHASE PRICE PAID BY YOU FOR SUCH PRODUCT.
THIS SHALL BE TRUE EVEN IN THE EVENT OF THE FAILURE OF ANY AGREED REMEDY. IN NO EVENT WILL WATCHGUARD BE
LIABLE TO YOU OR ANY THIRD PARTY (WHETHER ARISING IN CONTRACT (INCLUDING WARRANTY), TORT (INCLUDING
ACTIVE, PASSIVE OR IMPUTED NEGLIGENCE AND STRICT LIABILITY AND FAULT) OR OTHER THEORY) FOR COST OF COVER
OR FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOSS
OF PROFITS, BUSINESS, OR DATA) ARISING OUT OF OR IN CONNECTION WITH THIS WARRANTY OR THE USE OF OR
INABILITY TO USE THE PRODUCT, EVEN IF WATCHGUARD HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
THIS SHALL BE TRUE EVEN IN THE EVENT OF THE FAILURE OF ANY AGREED REMEDY.
5. MISCELLANEOUS PROVISIONS. This Warranty will be governed by the laws of the state of Washington, U.S.A., without
reference to its choice of law rules. The provisions of the 1980 United Nations Convention on Contracts for the
International Sales of Goods, as amended, shall not apply. You agree not to directly or indirectly transfer the Product or
associated documentation to any country to which such transfer would be prohibited by the U.S. Export laws and
regulations. If any provision of this Warranty is found to be invalid or unenforceable, then the remainder shall have full
force and effect and the invalid provision shall be modified or partially enforced to the maximum extent permitted by law
to effectuate the purpose of this Warranty. This is the entire agreement between WatchGuard and you relating to the
Product, and supersedes any prior purchase order, communications, advertising or representations concerning the
Product AND BY USING THE PRODUCT YOU AGREE TO THESE TERMS. IF THE PRODUCT IS BEING USED BY AN ENTITY, THE
INDIVIDUAL INDICATING AGREEMENT TO THESE TERMS BY USING THE PRODUCT REPRESENTS AND WARRANTS THAT (A)
SUCH INDIVIDUAL IS DULY AUTHORIZED TO ACCEPT THE WARRANTY ON BEHALF OF THE ENTITY AND TO BIND THE
ENTITY TO THE TERMS OF THIS WARRANTY; (B) THE ENTITY HAS THE FULL POWER, CORPORATE OR OTHERWISE, TO ENTER
INTO THE WARRANTY AND PERFORM ITS OBLIGATIONS UNDER THE WARRANTY AND; (C) THE WARRANTY AND THE
PERFORMANCE OF THE ENTITY’S OBLIGATIONS UNDER THE WARRANTY DO NOT VIOLATE ANY THIRD-PARTY AGREEMENT
TO WHICH THE ENTITY IS A PARTY. No change or modification of the Warranty will be valid unless it is in writing and is
signed by WatchGuard.

Hardware Guide 11
Legal and Regulatory Information
Declaration of Conformity

Legal and Regulatory Information
12
Safety Notices
All WatchGuard products are designed and tested to meet strict safety requirements. These requirements
include product safety approvals and other global compliance standards. Please read the following
instructions carefully before operating the product, and refer to them as needed to ensure the continued safe
operation of your product.
Product Safety Certification
The WatchGuard product is safety certified under the following standards:
CAN/CSA C22.2 No.60950-1-07+A1:2011
IEC 60950-1+Amd1 2nd Edition (2005)
UL 60950-1:2007 R12.11
EN 60950-1:2006+A11+A1+A12
Safety Warning
Do not place objects on the power cord.
Do not obstruct the ventilation openings. These openings prevent overheating of the machine.
Never push objects of any kind into slots or openings on this equipment. Making a contact with a
voltage point or shorting out a part may result in fire or electrical shock.
When removing or installing an appliance, follow the general installation safety instructions.
If the equipment is supplied with a three-conductor AC power cable, the power cable must be plugged
into an approved three-contact electrical outlet with the grounding wire connected to an electrical
ground (safety ground) at the power outlet.
The Lithium Battery used in the security appliance may not be replaced by the user. Return the
appliance to a WatchGuard authorized service center for replacement with the same or equivalent
type recommended by the manufacturer. If, for any reason, the battery or security appliance must be
disposed of, do so following the battery manufacturer's instructions.
HINWEISE ZUR SICHERHEIT
Alle WatchGuard Produkte werden entwickelt und getestet, um strenge Sicherheitsanforderungen zu
erfüllen. Diese Anforderungen umfassen Produktsicherheit Zulassungen und andere globale Compliance-
Standards. Bitte lesen Sie die folgenden Anweisungen sorgfältig, bevor Sie das Produkt, und bezeichnen sie
als notwendig, um den sicheren Betrieb des Geräts zu gewährleisten.
Product Safety Certification
Die WatchGuard Produkt ist Sicherheit unter den folgenden Normen zertifiziert:
CAN/CSA C22.2 No.60950-1-07+A1:2011
IEC 60950-1+Amd1 2nd Edition (2005)
UL 60950-1:2007 R12.11
EN 60950-1:2006+A11+A1+A12
Sicherheitshinweis
Legen Sie keine Gegenstände auf das Netzkabel.
Verdecken Sie nicht die Lüftungsöffnungen. Diese Öffnungen verhindern eine Überhitzung der
Maschine.

Hardware Guide 13
Legal and Regulatory Information
Stecken Sie niemals Gegenstände jeglicher Art in die Schlitze oder Öffnungen des Geräts stecken. Der
Kontakt mit einem spannungsführenden Punkt oder das Kurzschließen eines Bauteils kann zu einem
Brand oder elektrischen Schlag führen.
Beim Entfernen oder Installieren eines Gerätes, nach den allgemeinen Installation Sicherheitshinweise.
Wenn das Gerät mit einem Drei-Leiter-Netzkabel geliefert wird, muss das Netzkabel eingesteckt
werden in ein zugelassenes dreipoligen Steckdose mit dem Erdleiter verbunden mit einer elektrischen
Masse (Erdung) an der Steckdose.
Die Lithium-Batterie in der Sicherheits-Appliance verwendet werden kann durch den Anwender nicht
ausgetauscht werden. Bringen Sie das Gerät an eine WatchGuard autorisiertes Service-Center für den
Austausch mit dem gleichen oder gleichwertigen Typ, der vom Hersteller empfohlen wird. Wenn aus
irgendeinem Grund muss die Batterie oder Security Appliance entsorgt werden, also nach der Batterie
Anweisungen des Herstellers.
AVISO DE SEGURIDAD
Todos los productos WatchGuard están diseñados y probados para satisfacer estrictos requisitos de
seguridad. Estos requisitos incluyen la homologación de productos de seguridad y otras normas de
cumplimiento global. Por favor, lea atentamente las siguientes instrucciones antes de utilizar el producto, y se
refieren a ellos como sea necesario para garantizar el funcionamiento seguro y continuo de su producto.
Certificación de seguridad del producto
El producto tiene certificación de seguridad WatchGuard bajo las siguientes normas:
CAN/CSA C22.2 No.60950-1-07+A1:2011
IEC 60950-1+Amd1 2nd Edition (2005)
UL 60950-1:2007 R12.11
EN 60950-1:2006+A11+A1+A12
Advertencia de seguridad
No coloque objetos sobre el cable de alimentación.
No obstruya las aberturas de ventilación. Estas aberturas evitan el sobrecalentamiento de la máquina.
Nunca introduzca objetos de ningún tipo en las ranuras o aberturas del equipo. El contacto con puntos
de voltaje o el cortocircuito de una pieza podría provocar un incendio o una descarga eléctrica.
Al extraer o instalar un electrodoméstico, siga las instrucciones generales de instalación de seguridad.
Si el equipo se suministra con un cable de tres conductores de alimentación de CA, el cable de
alimentación debe enchufarse a un tomacorriente aprobado tres contacto eléctrico con el cable de
tierra conectado a un polo de tierra (tierra de seguridad) en la toma de corriente.
La batería de litio utilizada en el dispositivo de seguridad no podrá ser sustituido por el usuario.
Devuelva el aparato a un centro de servicio autorizado de WatchGuard para el reemplazo con el mismo
tipo o equivalente recomendada por el fabricante. Si, por cualquier razón, el aparato de la batería o de
seguridad deben ser eliminados, se deben seguir las instrucciones del fabricante de la batería.

Legal and Regulatory Information
14
FCC Certification
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
CE Notice
The CE symbol on your WatchGuard Technologies equipment indicates that it is in compliance with the
Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European
Union (EU).
Industry Canada
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de
licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de
brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage
susceptible de provoquer un fonctionnement indésirable.

Hardware Guide 15
Legal and Regulatory Information
Japan VCCI Notice
Mexico Notice
La operación de este equipo está sujeta a las siguientes dos condiciones:
1. es posible que este equipo o dispositivo no cause interferencia perjudicial y
2. este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su
propia operación no deseada.
Taiwan Notice
Korea Notice

Legal and Regulatory Information
16
People’s Republic of China Electronic Industry Standard
This table is presented in accordance with SJ/T11364-2006, Marking for Control of Pollution Caused by
Electronic Information Products, implemented in November 2006.
RoHS Statement
The member states of the European Union approved directive 2002/95/EC, Restrictions of Hazardous
Substances (“RoHS directive”‘) that became valid on July 1, 2006. It states that all new electrical and electronic
equipment put on the market within the member states must not contain certain hazardous materials. The
WatchGuard XCS complies with the European Union’s R0HS directive 2002/95/EC and similar regulations that
may be adopted by other countries for European Sales.

Hardware Guide 17
Legal and Regulatory Information
WEEE Statement
WEEE is a general set of requirements dictated in the EU Directive 2002/96/EC. This Directive mandated that
member EU countries enact regulations governing the Waste of Electrical and Electronic Equipment (WEEE).
The Directive, and its individual transpositions into specific country laws and legislation, is aimed at the
reduction of WEEE through reuse, recovery, and recycling of WEEE.
WatchGuard is working in partnership with our European Union (EU) distribution partners to ensure that our
products are in compliance with the WEEE statutes, and that the recovery of our product per the specific EU
country legislative requirements is seamless for our product’s end users. If you have a WatchGuard product
that is at its end of life and needs to be disposed of, please contact WatchGuard Customer Care Department at:
U.S. Customers: 877.232.3531
International Customers: +1.206.613.0456
WatchGuard is reasonably confident that our products do not contain any substances or hazardous materials
presently banned by any legislation, and do not present a risk due to hazardous materials. WEEE recovery
professionals should also note that these products do not have any materials that are of particular high value
in their individual form.
REACH Certificate of Compliance
The new EU chemicals policy REACH (Registration, Evaluation, Authorization and restriction of Chemicals)
came into effect on June 1st 2007. REACH is Europe's new chemicals legislation, which is applicable in all 27
EU Member States as well as the EFTA European Economic Area (EEA). REACH creates a new system for
gathering information, assessing risks to human health and the environment, and authorizing or restricting
the marketing and use of chemicals produced or supplied in the EEA. REACH has an impact on EEA producers
and importers of finished products and users of chemicals in the course of industrial or professional activities.
WatchGuard supports the overall REACH objective of improving the protection of human health and the
environment and will meet all applicable REACH requirements. WatchGuard is strongly committed to working
with our customers and supply chain to define and implement the REACH requirements and ensure a smooth
transition to compliance.
One of the REACH requirements is that manufacturers and importers have the duty to register substances they
are producing or importing. In accordance with the regulations, the products of WatchGuard do not need to
be registered for the following reasons:
1. WatchGuard does not import more than 1 metric ton per year of a substance as defined by REACH.
2. WatchGuard products are non-chemical products that are not designed to release any substance
under normal and reasonably predictable application.
3. Our products do not contain the listed substances at more than 0.1% by weight of the whole
product/part.

Legal and Regulatory Information
18