Watts Connected Roof 8200875 User manual

1
60 mm
Min. 50 mm
To acces
Micro SD card
35 mm
What You Need 2
4
6
7a
5
3
Configure Gateway
Connect
Power
Power supply
Gateway
Not included - optional
External antenna
Not included - optional
Screws
SD-card
Location
Place Gateway central and in line of sight
Installation Conditions Access Requirements
Temperature
-14° - 131°F
-10 – 55°C
Humidity
< 80% - non
condensing
Mounting holes Ø4 mm
7bInternal Power Connection
(optional)
QG-WD-CR-Gateway 2124
Mounting

Wait incomming
data ...
8b
10
11
9
8a
Modbus (RS-485) Relay
See Installation guide
Relay and Modbus
12
Sending signal every 3
minutes for 1 hour
Speed Up and Verify
Verify Monitor Connection
Confirm all monitors
Short circuit
Short bip
30
MIN
Wait incomming
data ...
The information contained herein is not intended to replace the full product installation and safety information available or the experience of a trained product installer. You are required to thoroughly read all installation instruc- tions and product safety information before beginning the installation of this product.
NOTICE
QG-WD-CR-Gateway 2124 EDP#1926060 © 2021 Watts
USA: T: [phone] • F: [phone] • Watts.com Canada: T: [phone] • F: [phone] • Watts.ca Latin America: T: (52) 55-4122-0138 • Watts.com
Connected Roof
Gateway
Wait and Verify