Wave BOLSTER User manual

The music meditation experience you can feel

POWERING ON YOUR WAVE™ BOLSTER
Press the power button for three seconds
to power on the bolster. The LED light will
turn blue when the bolster is on.
WELCOME TO WAVE™
CHARGING YOUR WAVE™ BOLSTER
Please use the link in your confirmation email to
download and sign in to the WAVE™ app. If you didn’t
receive the email, please finish registering at
www.wavemeditation.com/register
The WAVE™ Bolster can only be charged
using the charger provided. The charger is
not intended for use with any other devices.
We recommend charging your bolster
overnight to ensure a full battery.
WAVE

PAIRING YOUR WAVE™ BOLSTER
Turn Bluetooth on in
your smartphone by going
to Settings > Bluetooth.
123
Press and hold the power button
on the bolster interface down until
the blue light starts blinking.
Select “Wave Bolster” in your
smartphone settings to connect.
Light will stay solid blue when
Bluetooth is paired.
CONTROLLING THE VIBRATIONS
Press (-) or (+) buttons on the bolster interface
to control the vibration intensity. Five illuminated
LED lights indicates the highest vibration setting.
One illuminated LED light indicates the lowest
vibration setting.

LIQUIDS AND GREASE
Keep the bolster and headphones away from water,
drinks, grease, etc.
USING YOUR WAVE™ BOLSTER
We recommend using the bolster in two ways:
LIE DOWN ON IT
OR
SIT AGAINST IT
VENTILATION AND HEAT SOURCES
Specifications Safety Instructions
CANDLES AND OPEN FLAMES
CARE FOR THE BATTERY
DIMENSIONS 28”D x 12”W x 5”H
HEADPHONES OUTPUT 20mW
SPEAKER OUTPUT Low Frequency Vibrator 10W x 2
BATTERY Lithium-ion 5000mAh
POWER USB C 12V DC 3A
WIRELESS DISTANCE ~ 30 feet
BLUETOOTH Version 5.0
CHARGING TIME ~ 7 hours
ADAPTER MODEL HYT-1203000
ADAPTER INPUT AC 100-240V ~50/60Hz 0.8A MAX
ADAPTER OUTPUT .V⎓.A
ADAPTER MANUFACTURER Shenzhen Yi Mi Yue Technology Co., LTD
Made in China
Do not place the bolster or headphones in direct
sunlight or near heat sources such as radiators or fires.
Do not place lit candles or tea-lights on top of, or at
the sides of the bolster or headphones. Do not allow
any open flames near the bolster.
Do not store the bolster for extended periods with
the battery completely discharged. Keep the battery
charged as much as possible to extend the life of
your bolster.

RF EXPOSURE COMPLIANCE STATEMENT
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Cet équipement est conforme aux limites d’exposition aux radiations IC CNR-
102 établies pour un environnement non contrôlé. Cet émetteur ne doit pas
être situé ou fonctionner conjointement avec une autre antenne ou un autre
émetteur.
CORRECT DISPOSAL OF THIS PRODUCT
ISED COMPLIANCE STATEMENT
FCC WARNING STATEMENTS
Declaration for EU Compliance Operation Frequency Band/Max.
RF power transmitted: 2402-2480MHz, 0dBm
Hereby, Wave Meditation Inc. declares that the radio equipment
WAV-BOL-BK1 is in compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following
internet address: www.wavemeditation.com/faqs
Batteries shall not be exposed to excessive
heat such as sunshine, fire or the like.
Do not step or stand on the bolster.
Do not toss the bolster around. This may cause malfunction.
For charging safety, use only the charger provided.
Do not let children use product without supervision, to avoid danger or
asphyxiation, in case headphone cable winds around children’s neck.
Do not cover bolster when in use to avoid overheating. Do not use bolster
in heated places like direct sunshine, or when left inside car in sunshine.
Overheating may cause damage, fire, or electric shock.
Do not open, or attempt to open, the casing. There are no user-serviceable
parts inside. Failure to adhere to the instructions provided will invalidate the
warranty.
This bolster features an internal Lithium-ion battery, please treat with care.
Improper charging or use may result in fire, personal injury and damage to
property.
Please see care label on the inside of the removable bolster cover for cleaning
instructions.
Do not use the bolster in a wet or dusty environment. Bolster should not get
wet with any liquid such as water.
This product is designed for home environment and indoor use only.
Bolster weight capacity limit: 300 lbs
WARNING
CAUTION
Waste Electrical & Electronic Equipment (WEEE)
The crossed out wheelie bin is intended to show that this appliance must
not be placed with ordinary household waste at the end of its useful
life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please keep separate from other household
waste and recycle it responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where you purchased
the product, or their local government office for details of where and
how you can take this item for environmentally safe recycling. Business
users should contact their supplier and check the terms and conditions
of the purchase contract. This product must not be mixed with other
commercial wastes for disposal.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
L’émetteur exempt de licence contenu dans le présent appareil est conforme
aux CNR d’Innovation, Sciences et Développement économique Canada
applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Caution: The user is cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
CAUTION

WARRANTY
For more information about
our warranty or product please visit:
www.wavemeditation.com/faqs