WaveSplitter WST-PEX004 User manual

Copyright ©2020 Wavesplitter AV Technology |Wavesplitter .com
TEL：[phone] MAIL：[e-mail]
V4
OPERATION MANUAL
Model No. WST-PEX004
HDMI 1080P PoC & IR over Single Cat.5e/6 Extender with Loop out, 50m
Safety Instruction

Copyright ©2020 Wavesplitter AV Technology |Wavesplitter .com
TEL：[phone] MAIL：[e-mail]
V4
OPERATION MANUAL
Introduction
The WST-PEX004 Extender is a simple to use plug and play solution which lets the user extend HDMI signals up to 50m using a single low-cost
Cat.6 UTP cable (not included). For added convenience, IR signals (20-60KHz) can also be extended using the supplied IR Receiver and Emitter
cables.
Supporting resolutions up to Full HD 1920x1080@60Hz, video content can be seen with incredible clarity at distances up to 50m, which is perfect
for a variety of AV and digital signage applications.
The Extender features an HDMI loop-through output on the Transmitter with simultaneous viewing so that a local display can be connected to
monitor the remote display or to create an additional viewing zone. To ensure the maximum compatibility when two displays are connected, the
EDID data (that determine the supported audio/video formats) can be used from either a local monitor connected to the Transmitter, or the
remote display connected to the Receiver.
Power over Cat.6 (PoC) functionality enables the Extender to operate from a single power supply connected to the Transmitter, allowing the
Receiver to be positioned where there is limited access to power..
Key Features
Each set includes one Transmitter with loop out and one Receiver
Audio sampling rates up to 48kHz, support 7.1 channels
Supports 1080P@60Hz YUV4:4:4; maximum extension of 50m
DC12V/1.25A; supports PoC power supply
RX-end one-way infrared transmission to TX-end
Local and remote EDID Copy function
Extension distance dialing switch setting: Cat5e / Cat6 10m～50m
Supports Dolby®, TrueHD, DTS-HD®, Master Audio™
Package Contents
Transmitter x 1 | Receiver x 1 | 12V/1.25A Multi-Country Power Adapter x 1 | IR Emitter x 1 | IR Receiver x 1
Panel Description
EQ DIP Switch
000 1~15meters
011 16~30meters
101 31~40meters
111 41~50meters
Note :
The Receiver has 3-bit EQ DIP switch for setting of
extension distance.
Follow the table on the right to set the DIP switch to the
correct binary combination for the required extension
distance.
※When the distance up to 41~50m, please make sure the UTP cable up to 24AWG.

Copyright ©2020 Wavesplitter AV Technology |Wavesplitter .com
TEL：[phone] MAIL：[e-mail]
V4
OPERATION MANUAL
Applications
Connecting and operating
1. Connect 1 source such as a Blu-Ray Player, game console, STB, etc. to the HDMI input on the transmitter．
2. Connect 1 display such as an HDTV or HD Projector to the Loop HDMI output on the transmitter.
3. Connect 1 display such as an HDTV or HD Projector to the HDMI output on the receiver．
4. Connect a single Category 5e / 6 / 7 up to (50m) to both transmitter and receiver.
5. Plug in the IR-RX cable and IR-TX cable to the IR jack port located on the Receiver and transmitter banal.
6. Power on the transmitter firstly, then power on the source and sink.

Copyright ©2020 Wavesplitter AV Technology |Wavesplitter .com
TEL：[phone] MAIL：[e-mail]
V4
OPERATION MANUAL
Specifications
Interface
Transmitter
InputsHDMI Type-A (Female) x 1
Outputs HDMI Loop out Type-A (Female) x 1
RJ-45 (Female) x 1
IR-Out slot x 1
Receiver
InputsRJ45 (Female) x 1
IR-In slot x 1
OutputsHDMI Type-A (Female) x 1
Transmission
HDMI CompliantHDMI 1.3a (DVI 1.0)
HDCP Compliant 1.4
Input Video Signal 0.5-1.0 Volts P-P
Input DDC Signal 5 volts p-p (TTL)
Output Signal HDMI
Output Resolution (Max.) 1920x1080P@60Hz
Audio Format Dolby
®
/ TrueHD / DTS-HD
®
/ Master Audio™ / multi-channel 7.1 / stereo etc.
IR Frequency 38-56kHz
Power
Power Supply 12V/1.25A DC
Max Power Consumption 15W
Environment
Operating Temperature -5˚C～40˚C
Storage Temperature -20˚C～60˚C
Product Structure
Main Material Iron
Size W x D X H TX : 79 x 68 x 17mm
|
RX : 79 x 68 x 17mm
Weight TX : 120g
|
RX : 115g
Country of Origin China
Certification
Safety & Emission CE / FCC / RoHS / RECAH