Wayfair AY1003 User manual
Electric Towel Warmer
User’s Manual
Adding a heated towel bar is one that can turn your everyday shower into a luxurious experience.
Thank you for choosing our finely crafted towel warmer.
I. Important Safeguards
When using electrical appliances, basic safety precautions should always be followed, including
the following:
1. READ ALL INSTRUCTIONS.
2. This unit is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
3. Children should be supervised to ensure that they do not play with the unit.
4. Do not operate any unit with a damaged cord or plug or after the rack malfunctions, or has
been damaged in any manner. Bring it to a qualified technician for examination, repair or
electrical or mechanical adjustment.
5. Do not use to dry silk fabrics.
6. Ensure that unit is securely fixed to the wall. Unit is designed for drying towels. Under no
circumstances should anybody climb on or hang on unit.
7. This unit must be connected to the electrical nameplate display rated voltage on the power
supply.
8. There should be at least a 48'' clearing between the bottom edge of the unit and the floor.
9. To avoid a possible fire hazard, it is essential unit is mounted in accordance with guidelines
stated in these instructions.
II. Care & Cleaning Instructions
1. For routine cleaning, simply switch off the unit, allow to cool to room temperature, wipe with
a damp cloth and buff with a soft, dry cloth.
2. Under no circumstances should abrasive cleaners be used to clean the unit.
3. Do not immerse cord, plugs, or appliance in water or other liquid.
Notes
Warning: Before drilling, use an electronic detector to confirm whether there are power lines,
communication cables or water pipes in the wall. If you use laser equipment to locate the
borehole, do not forget the following two points:
A. Please bring protective mirror;
B. Turn off the power after using the equipment.
Warning: There is a danger of electric shock. The power cord needs a ground wire and can only
be connected to a circuit protected by a ground fault short circuit or a leakage circuit breaker.
Note: this specification will be adjusted and improved according to the continuous upgrading
of our products.
III. Specifications
Model
AY1003
Voltage
110 Volt
Wattage
110 Watt
Frequency
60 HZ
Temperature
115-155℉
Material
201 Stainless Steel
Mount Type
Wall Mounted
Heat Type
Electric
Electrical Connection
Hardwired; Plug-in
In the power state, long press the "switch timing key" in the left figure to turn on / off.
After it starts, automatically default will be opened. The screen displays the set temperature.
Click the "temperature key" to adjust the temperature freely from 115 to 155°F. Short press
"switch timing key " , can freely adjust the time from 1 to 8 hours. If you need to use it
longer, please press the "switch timing key" and adjust the time to the “0H”.
IV. Package List
Serial number
Name
Unit
Quantity
1
Electric Towel Warmer
Set
1
2
Expansible Rubbers
A
5
3
Covers of Steel Pipes (Black)
A
3+1
4
Fixed Bases (Silver)
A
3+1
5
Screws
A
5
6
Fixed Bases (Silver)
Root
3+1
7
Screws of Steel Pipes
A
3+1
8
Hexagon Socket Screws
A
5
9
Hexagon Wrench
A
1
10
Specification / Warranty
A
1
V. Installation
Watch This Video Instruction Before Use
https://youtu.be/z8ioiXL945g
Step1: Align the steel pipes with the grooves of the black bases, fix
them to the towel rack by screws.
Tips: The steel pipes with U-Shaped groove and black base with two pilot holes are installed on
the position with the wire.
Step2: Draw the drilling points for the 4 silver bases.
Tips: Install the silver base with 3 pilot holes on the position of the wire and fix it to the wall
with two screws.
Step3: Drill out 5 pilot holes with the depth of 1.57'' and the diameter
of 5⁄16''.
Step4: Install the expansible rubbers to the hole.
Step5: Align the silver base and fix it to the wall with screw.
Step6: Install the towel rack to the silver bases on the wall and fix them
with the hexagon socket screws.
VI. Q&A
Questions
Answers
Solutions
Electric towel rack is not
working
There may be something
wrong with the power plugs.
Make sure the plug is
connected properly.
Electric towel rack is not hot
Aging of heating wire or poor
connection
Please contact us.
Ⅶ. After Sales Service
Your product is guaranteed for two years from the date of purchase. Within this period, we
undertake to repair or exchange this product free of charge provided it has been installed and
operated in accordance with these instructions. Should you require after sales service you should
contact our customer services at Paraheeter@outlook.com. Please do not return a faulty product
to us in the first instance as this may result in loss or damage and delay in providing you with a
satisfactory service. Thanks!
Add: 2691 Richter Ave Suite123, Irvine CA 92606
Tel: 323 831 2020
If the number you called is busy or not answered, please do not hesitate to contact us via email.
We will reply you back within 10 hours.
Table of contents
