Waytronic Powersound V1.07 User manual

Shenzhen Waytronic Electronics Co., Ltd. PowerSound V1.07
- 1 -
Powersound V1.07
(Human Body Induction)
Use Manual
1. Features
Dimension: 27*18*13CM
8-level volume control
Support the SPI-Flash memory.
Built-in 10W power amplifier circuit.
Using infrared induction technology.
The sensor has wide induction range.
Maximally support 32G SD card as storage.
Offline replace the voice with no tools and software;
Support two play modes: loop sequence, single playback.
Support DIY. Features and accessories can be customized;
Built-in MP3 module with 5-30 minutes, supporting MP3 format.
Support SD card playback. SD card does not support hot-plug and play the voice of the SPI-flash without SD
card.

Shenzhen Waytronic Electronics Co., Ltd. PowerSound V1.07
- 2 -
2. Parameters
Power supply DC12V
Working current
Standby state ≤60MA
Playing state ≤600mA（DC12V）
Audio format MP3 Bit rate: 8~320Kbps
Audio output power 8Ω/10W(typical value)
Infrared induction range ≤5 meters(120°)
3. Panel
Button
Operation
Description
Previous/A
Short press
Switch to the previous one
Long press 3S Red light flashing once means switching to A mode successfully; A mode
is the loop trigger mode, that is, each trigger has different voice play.
Next/B
Short press
Switch to the next one
Long press
Red light flashing twice means switching to B mode; B mode is the single
loop mode, that is, each triggering, the same voice will be played.
V+/C Short press Volume up
Long press 3S
Red light flashing means into the copy mode; insert the U disk and copy
the audio to the internal flash.
V-/L Short press Volume down
Long press 3S Invalid

Shenzhen Waytronic Electronics Co., Ltd. PowerSound V1.07
- 3 -
4. Audio download
4.1 SD card playing
(1) Do not put any folder or other format files in the SD card, only copy the MP3 format audio that you need copy
in, otherwise it will cause error in copy.
(2) If you want the audio play in order, you can rename the audio name, the first playing audio named 001+audio
name, the second playing audio named 002+name, (such as: 001 welcome. 002 looks forward to your next visit),
After the copy is completed, refresh the SD card, then the audio will be playing in order.
(3) Insert the SD card in the unit, the audio in SD card is in priority play.
Notice
(1) Please insert the SD card then power on.
(2) During playing, after removing the SD card, it needs to be powered on again to playing the audio in internal
memory.
4.2 Copy audio to internal memory by U disk
(1) Do not put any folder or other format files in the U disk, only copy the MP3 format audio that you need copy in,
otherwise it will cause error in copy.
(2) If you want the audio play in order, you can rename the audio name, the first playing audio named 001+audio
name, the second playing audio named 002+name, (such as: 001 welcome. 002 looks forward to your next visit),
After the copy is completed, refresh the U disk, then the audio will be playing in order.
(3) Insert the U disk to USB interface, the audio will be copy to internal memory automatically, indicator light is
flashing, when the copy is finished, the indicator light will automatically go off.
(4) When the copy finished, the previous audio will be deleted automatically.
Noticed
(1) The audio memory can not exceed the unit internal memory (standard memory is 4MB).
(2) The USB interface did not support copy audio from computer directly.
5.Parts list
Name Specification
Standard
/Optional
accessory
Quantity Remark
Powersound V1.06 The main part Standard 1 White
Power adapter National standard, input AC100/240V,
output DC12V/1A Standard 1 Black
User Manual Instruction Standard 1 White

Shenzhen Waytronic Electronics Co., Ltd. PowerSound V1.07
- 4 -
6. FAQ
1: Why can’t I hear any sound after turn on the device
Answer: (1)please check if the volume level is “mute”
(2)please check if the format of sound file is MP3, and the capacity is less than standard capacity.
2: How to supply power to Powersound V1.06 ?
Answer: using 12V 2Aadapter
3: Why can’t I find the folder when connect with computer via USA cable?
Answer：(1)Normally it will takes 5 seconds to found the folder
(2) Please check if the USB cable is working
4:How come Powersound V1.06 will play wrong sound file or do not play ?
Answer（1）If it is the first time to turn on Powersound V1.06 ,then it need one minute to check itself,then work
normally.
(2) The working temperature of Powersound V1.06 is 0 - 30℃，so please do not install it near the Air
conditional .
Indemnification
SHENZHEN WAYTRONIC ELECTRONIC CO.,LTD. reserves the right to modify and use information without
prior notice to customers. New product specifications will be subject to the latest version.
Contact Us
Shenzhen Waytronic Electronics Co., Ltd.
Tel: [phone]
Fax : [phone]
Website: https://www.waytronicmfg.com/
E-mail: [e-mail]
Add:4/F,Building No.11,Fuan Robotics Industrial Park, Fuyong,Baoan
District ,Shenzhen ,518103,Guangdong ,China