WeatherTech FaceShield Air User manual

FaceShield Air
FaceShield Air Assembly Instructions
Remove Headband with ComfortPad, Strap and Lens
from box.
Align holes in the top of Lens with snap posts on the
Headband and gently secure by pressing Lens holes
onto snap posts. Lens is reversible so you can use
either side.
Place first adjustment slot of Strap on either right or left side of Headband, place on head, extend Headband
and Strap around your head as you would a normal hat strap, and secure loop through adjustment slot. Once
comfortable, take note of the adjustment slot number on Strap and leave secured – that’s your size!
1 2
3A 3B
Headband
Lens
Strap

Cleaning Instructions - ComfortPad
Remove ComfortPad from
Headband.
Wash with gentle, mild
hand soap.
Dry with a soft cloth. Align the nibs on
ComfortPad and Headband
and secure in place.
1 2 3 4
Cleaning Instructions - Lens
Remove Lens from Headband. Wipe down with a soft wet wipe. Let air dry, or gently dry with a
soft cloth and secure Lens back
onto Headband snap posts. If lens
becomes scratched, order more at
WeatherTech.com!
1 2 3
LET’S TALK
800-441-6287 or 630-769-1500
For warranty information, please visit www.WeatherTech.com/warranty
Nib
Made in USA
67FS01 © 2020 MacNeil IP LLC