Weaver Leather MASTER TOOL 65-3075 User manual

MASTER TOOL MIGHTY WONDER
4-TON HAND-OPERATED CLICKER
Congratulations on the purchase of your new clicker. Made by
Weaver Leather, this clicker features a swivel-away clicker head
that allows you to see where you’re setting the die and offers
easier clicking. This convenient hand-operated clicker features
a 29" handle that gives you extra leverage. A height adjustment
nut makes it simple to adjust the machine for using 1-1/4" dies.
With a large 3" cam for increased leverage, this clicker is
perfect for using up scrap leather for key fobs, coasters,
spur straps and other small leather goods.
For your convenience, only minimal assembly is required.
The Hand-Operated Clicker features holes and mounting
hardware for easy attachment to your solid wood workbench.
Do not operate this machine until you have read this
instruction sheet in its entirety and the machine is
securely bolted in place to a solid wood workbench.
This machine is designed for clicking leather. Use for
any other purpose is prohibited and voids the warranty.
A- Base
B- Height Adjustment Nut
C- Clicker Head
D- Cam
E- Allen Screw for Handle
(pictured in inset on left)
F- Clicker Board
D
C
A
F
1) Attach Base (A) to solid wood workbench using the
included mounting hardware. A good workbench
height for clicking is 28".
2) Attach handle by inserting into hole in Cam (D) and
tightening Allen Screw (E).
HANDCRAFTED IN THE USA
LIMITED LIFETIME GUARANTEE
ASSEMBLING THE HAND-OPERATED CLICKER
weaverleathersupply.com
800-932-8371
INSERT-134 4/21
B
E

OPERATING THE MACHINE
MAINTENANCE
1) Place die on Clicker Board (F) without any material.
2) Ease the handle forward until the head is resting on top
of the clicker die. Please note: Do not apply pressure
to die at this time.
3) Adjust Height Adjustment Nut (B) clockwise or
counterclockwise until the Clicker Head (C), with the
handle in the down position, sits lightly on top of the
clicker die. This adjustment should be satisfactory for
most material. A few small adjustments may be needed,
depending on the size of the blade or the toughness
of the material to be cut.
4)After the machine is adjusted properly, lay your material
flat on the Clicker Board (F) free of any wrinkles.
5) Position the clicker die on top of the material and pull the handle
forward to apply enough pressure to cut through the material.
Safety
• Never use this machne unless it is securely fastened down
to your solid wood workbench.
• Always keep hands and fingers away from the clicker head
and clicker board during operations.
• Keep away from children at all times.
Limited Lifetime Guarantee
Every Master Tool is built to last using the finest materials and
skilled American workmanship. We are proud to stand behind
our products with an unmatched Limited Lifetime Guarantee.
This quality standard warrants each product for its lifetime
against defects in materials and workmanship under correct
use, normal operating conditions and proper application.
This guarantee does not extend to any component parts
not manufactured by Weaver Leather, or if the machine is
modified in any way. Weaver Leather makes no express
warranties other than those that are specifically described
herein. This warranty is expressly in lieu of all other warranties
express or implied. There are no implied warranties of any
kind including merchantability or fitness for a particular
purpose. Weaver Leather will in no event be liable for
any incidental or consequential damages whatsoever,
nor for any sum in excess of the price received for the goods.
• Oil the machine as needed with 30SAE oil.
• To keep your clicker working smoothly, we recommend
greasing the clicker once a month at the grease fittings
mentioned below.
• The tube of the Clicker Head (C) has a grease
fitting that should be greased at regular intervals
depending on use.
• Also, grease the two grease fittings on Cam (D).
weaverleathersupply.com
800-932-8371
A- Base
B- Height Adjustment Nut
C- Clicker Head
D- Cam
E- Allen Screw for Handle
(pictured on front page)
F- Clicker Board
D
C
A
F
B
CLICKER SPECIFICATIONS
• Width: 15"
• Height: 43" (with handle extended)
• Depth: 10"
• Clicker Board: 8.375" x 11.875"
• Weight: 100 lbs.
• Dies: 1.25" Steel Rule Dies