WEB Biotechnology SPYDER BLUETOOTH User manual

Last update 31/Jan/2014, Revision 4
2

3
4
5
6
7
9
12
13
17
19
22
25
26
29
30

4

5
www.doctorspyder.com.

6

250
5 to 42
Heart Rate Accuracy: +/- 1 bpm
7

15 to 93
Atmospheric pressure of 700-1060 hPa
SPBT20A_V1.1
8

Please remove batteries inside Spyder Bluetooth when the device is not
likely to be used for some time, during transport and before storage to
avoid the risk of leakage from batteries.
Avoid having Spyder Bluetooth in contact with water.
Spyder does not require to operate in a sterile environment and does not
require any deliberate cleaning or maintenance routine under normal use.
However, user may clean the external surfaces of the device in case of
contamination due to lint or dust using a lint free cloth.
This equipment needs to be installed and put into service in accordance
with the information provided in this document. No modification of Spyder
Bluetooth is allowed.
This product must be disposed properly according to local laws and
regulations. Since this product contains a battery, the battery must be
disposed separately from household waste.
Spyder Bluetooth was not evaluated for use in an oxygen rich environment.
.Spyder Bluetooth is not intended for use with flammable anesthetics
9

10
agents.
If the product is received in a damage state, do not use. Return the product
according to service information section in user manual.
If the on/off switch does not work, or if the cover of Spyder Bluetooth
becomes loose, there is no risk to the patient. However, return the parts
according to service information section in user manual.
In case of Spyder Bluetooth failing to function normally or appearance of
phenomenon like, Spyder Apps screen goes blank, no waveform is seen on
phone, the notification alarm on the phone ring or the green indicator
lights fails to turn on/off, please follow the instructions in troubleshooting
section of the user manual.
Spyder Bluetooth is intended to be used with biocompatible electrodes
with CE mark only.
The mobile phone with the Spyder Apps must be kept within "10 metre"
direct line of sight with the equipment. In case of exceeding this distance,
an alarm will sound and user simply need to move the equipment within
range and connections will automatically re-establish.
Spyder Bluetooth is not intended for use in conjunction with flammable

Spyder Bluetooth is not intended for use in an environment with stronger
than normal magnetic fields, external electrical influences, electrostatic
discharge, pressure or variations in pressure and acceleration. If Spyder
Bluetooth is expose under the above unintended operating environment,
move the Spyder Bluetooth away and normal operating functions should
resume without problem. In case of uncertainty, you may refer to the
troubleshooting section of the user manual or consult the manufacturer
for guidance.
Wireless communications equipment like wireless home network devices,
mobile phones, cordless telephones and their base stations, walkie talkies
can affect this equipment and interfere Spyder Bluetooth equipment. For
optimum performance, Spyder Bluetooth should be kept at least a distance
of 0.163m away from the interfering source equipment.
This equipment is to be operated away from direct light source that will
result in an operating environment out of the stated specification in the
manual.
Spyder Bluetooth is not design for ST segment analysis.
Spyder Bluetooth is not intended for use in conjunction of a pacemaker.
Spyder Bluetooth is not intended for use on infants weighing less than 10
kg.
11

-25 to 70
Up to 93%
Atmospheric pressure of 700-1060
hPa
12

If Spyder Bluetooth is used for the first time, follow the instructions
below:
1) The following accessories are required to complete the set up
a) Spyder Bluetooth SPBT20A
b) 2 x AAA alkaline batteries
c) Pre-loaded Spyder Apps mobile phone with paired connections
to Spyder Bluetooth (This task must be performed by
agent/distributor at the point of purchase).
2) Load the batteries according to "Replacing the batteries" Page
17.
3) Turn on the Spyder according to Page 14 - 16.
13

4) Turn on the Paired-Spyder mobile phone with preloaded Spyder
apps.
5) Follow the instructions of "Using Spyder Apps" on page 19-21.
14
ON
OFF

15

ON
OFF
16

17

+
+
18

Battery Indicator
Marker
Heartbeat Rate
Server Connectivity
Time
71 BPM 11:2 8 Set tin gs
19

Marker
71 BPM 11:2 8 Set tin gs
Red line
Button
20