Weber igrill2 User manual

User Manual

Table of Contents
In the Box 3
Quick Start Instructions 3
Getting Started 4
Weber iGrill App 4
Battery Replacement 5
Powering On & Off 5
Connecting 6
Disconnecting 7
Mounting 7
Probe Use 8
Probe Wrap Use 9
Using the iGrill 2 9
Display 9
Probe Toggle Buttons 10
Proximity Sensor 11
Custom & Preset Alarms 11
Setting Up A Cook 12
Preset Alarms for Different Types of Meats 12
Creating a Custom Preset 12
Pre-Alarm Notication 13
Renaming Probes 14
Timer Tool 14
Globe Tool 14
Graph Tool 14
Problem Solving 15
Disclaimer 19
Regulations 19

3
In the Box
Inside your iGrill 2 box, you will nd:
• 1 iGrill 2
• 2 AA Batteries
• 2 Pro Meat Probes
• 2 Probe Wraps
• 2 Colored Probe Indicators (Yellow and Red)
• 1 Optional Magnetic Disc
• Quick Start Guide
Quick Start Instructions
1. Download the Weber iGrill App from the App Store®or Google
PlayTM Store on one of the following compatible devices:
• iPhone®(4S and later)
• iPad®(3rd generation and later)
• iPad mini™ (all generations)
• iPod touch®(5th generation and later)
• Many Android™ devices equipped with Bluetooth®4.0 and
running Android™ software version 4.3 or later
2. Enable Bluetooth®on your smart device under ‘Settings.’
3. Separate the iGrill 2 from its base by rmly holding the base with
one hand and gently pulling the iGrill 2 top upwards with the other
hand.
4. On the underside of the iGrill 2, press down and remove the battery
door. The two AA batteries that are supplied with your iGrill 2
should be inserted with their negative terminals compressing the
springs. Replace the battery door.

4
5. Clip the iGrill 2 top back onto its base.
6. Plug one or more probes into the probe ports of the iGrill 2.
7. Press the power button located at the bottom of the faceplate
between the < and > buttons for two seconds. The unit will display
“On”, animate and a single beep will sound, indicating that the
iGrill 2 has powered on.
8. Open the Weber iGrill App to connect to your iGrill 2. Tap on the
white iGrill logo in the black toolbar at the top of the app. Select
your iGrill 2 from the ‘Available Devices’ drop-down.
9. You are now ready to use your iGrill 2!
Getting Started
Weber iGrill App
The Weber iGrill App provides all of the functionality and customization
you will need to get the most out of your iGrill 2. The Weber iGrill App is
compatible with the following devices:
• iPhone®(4S and later)
• iPad®(3rd generation and later)
• iPad mini™ (All generations)
• iPod touch®(5th generation and later)
• Many Android™ devices equipped with Bluetooth®4.0 and running
Android™ software version 4.3 or later
You must be running iOS 7+ or Android™ version 4.3 or later on your
device to use the Weber iGrill App. Please visit the App Store®or Google
Play™ Store and search “Weber iGrill 2” to download the free Weber iGrill
App.
Once you have downloaded the app, you will have access to links
for instructional videos, step-by-step instructions and FAQs for
troubleshooting.

5
Battery Replacement
To replace your iGrill 2 batteries, follow these steps:
• Separate the iGrill 2 from its base by rmly holding the base with
one hand and gently pulling the iGrill 2 top upwards with the other
hand.
• On the underside of the iGrill 2, press down on the tab and remove
the battery door.
• Replace the two AA batteries with their negative terminals
compressing the springs and replace the battery door.
Battery Precautions:
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon zinc) or rechargeable (ni-cad,
ni-mh, etc.) batteries.
• Dispose of spent or damaged batteries according to manufacturer
instructions and local laws.
Powering On & Off
To turn the iGrill 2 on, follow these steps:
• Press the power button located at the bottom of the faceplate
between the < and > buttons.
• The display will animate, and a single beep will be heard, indicating
that the iGrill 2 has powered on.
To turn the iGrill 2 off, follow these steps:
• Press and hold down the power button located at the bottom of the
faceplate between the < and > buttons for several seconds. The
display will show “OFF”.
• Upon releasing the power button, the iGrill 2 will turn off.

6
Auto Shut-Off:
• The iGrill 2 will stay powered on for ve minutes before
automatically turning off if there are no probes installed and if it is
not paired to a smart device.
• The iGrill 2 will stay powered on for eight hours before automatically
turning off if not paired to a smart device and if probes are installed.
• The iGrill 2 will stay powered on indenitely if at least one probe is
installed and if it is paired with a smart device.
Connecting
To connect your iGrill 2 to your iPhone®, iPad®, iPod touch®or Android™
device follow these steps:
• Open Settings.
• Tap Bluetooth®.
• Set Bluetooth®to On.
• While turned on, place your iGrill 2 next to your smart device and
open the Weber iGrill App. Your smart device will automatically
recognize any available iGrill products and display them in the
‘Available Devices’ drop-down. You can view the ‘Available Devices’
by tapping the white iGrill logo at the top, right-hand corner of the
app.
• Select your iGrill 2 from the ‘Available Devices.’ You will then be
prompted to accept a pairing request. Once you accept, your smart
device will pair with the iGrill 2 and you are ready to congure your
settings and start cooking!
To connect an additional iGrill 2 or other iGrill product to your iPhone®,
iPad®, iPod touch® or Android™ device, follow these steps:
• While turned on, place your iGrill 2 (or other iGrill product) next to
your smart device and open the Weber iGrill App.

7
• Tap on the white iGrill logo located at the top of the app to expose
the ‘Available Devices’ drop-down. Select the product you would
like to pair with from the ‘Available Devices.’ Your smart device will
display a pairing request. Once accepted, your smart device will
pair with the additional product you choose. Now you are ready to
congure your settings and start grilling!
Disconnecting
While turned on, place your iGrill 2 next to your smart device and open
the Weber iGrill App. Your smart device will automatically recognize any
available and previously connected iGrill products. You can display them
in the ‘Available Products’ drop-down by tapping the 3 lines or dots at the
top right-hand corner of the screen.
If your iGrill 2 is connected, it will be listed under ‘Connected Devices.’
If you would like to disconnect your iGrill 2, you can swipe to the left on
the product name (i.e. iGrill 2) to expose the ‘Disconnect’ option.
Tap ‘Disconnect.’
Mounting
• The base of the iGrill 2 is magnetic for convenient positioning on a
cool portion of your grill, smoker or other magnetic surfaces.
• The iGrill 2 can be taken out of its base, rotated 180° and set back
into its base for two different viewing angles.
• The iGrill 2 comes with an optional magnetic disc which has an
adhesive on one side. This allows the iGrill 2 to magnetically mount
to a non-magnetic surface. The magnetic disc has a protective cover
on its face to protect it from being scratched.
To mount your magnetic disc, please follow these below steps:
• Clean the surface thoroughly where the magnetic disc will be
adhered to ensure proper bonding.
• Remove the lm covering the adhesive on the magnetic disc.
• Adhere the magnetic disc to your desired surface.

8
• Let the magnetic disc bond to the surface for 6-12 hours before
mounting your iGrill 2 to the disc.
• Place your iGrill 2 on the magnetic disc.
The magnetic base is not designed to withstand
high heat and it must be placed on a cool surface.
If the surface is too hot to touch, it’s too hot for
the iGrill 2 base!
Probe Use
• Pro Meat Probes should always be inserted into the thickest, center
part of the item being cooked for an accurate temperature reading.
• When using the included Pro Meat Probes that are included with the
iGrill 2, be sure to route the probe wire where it will not be exposed
to ames or temperatures exceeding 716°F (380°C). Probes should
avoid temperatures below -58°F (-50°C).
• When using Standard Meat Probes, which are sold separately, be
sure to route the probe wire where it will not be exposed to ames
or temperatures exceeding 572°F (300°C). Probes should avoid
temperatures below -22°F (-30°C).
• The Pro Ambient Probe, also sold separately, should be clipped
between two grates inside your grill, smoker or oven. Ensure the tip
of the probe does not touch the grates. Also, be sure to route the
probe wire where it will not be exposed to ames or temperatures
exceeding 620°F (326°C), and avoid temperatures below -22°F
(-30°C).
• The included Probe Wraps included with your iGrill 2 allow for
convenient storage of your probes and are magnetic so that they
can be stored under your iGrill 2 when not in use.

9
The colored probe indicators are for visual identication of
the probe(s) within the app and cosmetic purposes only.
They are not designed for heat safety.
The probes should be cleaned by wiping them down with a
damp towel or sanitary wipe. The probes are not dishwasher
safe. Take precaution, making sure to not get the wiring of
the probes wet as well as the area where the probes’ wiring
meets the probe.
The probes are not waterproof and damage may result from
water exposure. Never submerge your probes in water.
Temperatures below -22°F or above 572°F (-30ºC or above
300ºC) will not display in the Weber iGrill App and will cause
the probe to disappear from connection.
Probe Wrap Use
To wrap your probe(s):
• Hold the probe wrap so that the clip segment is on the bottom left
and the logo is legible in the center of the probe wrap.
• Snap the probe into the probe wrap’s clip, ensuring that the probe’s
body follows the contour of the probe wrap and leaves a ½ inch gap
between the probe and the wire channel of the probe wrap. The tip
of the probe should be pointed downward.
• Wrap your probe’s wire clockwise around the probe wrap.
• When you reach the adapter end of the probe wire, it can be
inserted into the probe wrap’s wire channel to secure the wrapping.
Using the iGrill 2
Display
The display of the iGrill 2 contains the following:

10
Display
• Displays temperature of currently active probe.
• Displays “DC” for temperatures below -22°F (-30ºC).
• Displays “DH” for temperatures above 572°F (300ºC).
• Displays “OFF” during power off sequence.
• Animates during power on sequence and during reset.
Bluetooth®LED
• Blinks blue when discoverable and awaiting pairing.
• Illuminates solid blue when paired.
Probe Indicator LEDs
• Far left side LED illuminates to indicate Probe 1 temperature is
being displayed.
• Middle left side LED illuminates to indicate Probe 2 temperature is
being displayed.
• Middle right side LED illuminates to indicate Probe 3 temperature is
being displayed.
• Far right side LED illuminates to indicate Probe 4 temperature is
being displayed.
Probe Toggle Buttons
The iGrill 2 has two buttons adjacent to the power button to toggle
between probes when there is more than one probe connected.
• Pressing the < or > button will switch from the currently displayed
probe temperature (as indicated by the illuminated probe indicator
LED) to the next probe.
• Holding either the < or > button down for one second will activate
a cycle that will continuously cycle through displaying each probe’s
temperature.