Wecon LX3V-16EY User manual

Output expansion
module user manual
Website: http://www.we-con.com.cn/en
Technical Support: [email protected]
Skype: fcwkkj
Phone: [phone]
QQ: 1043098682
Technical forum: http://wecon.freeforums.net/

Output expansion module
1 WECON Technology Co., Ltd.
General
This manual is applied to LX3V-8EY and LX3V-16EY digital output expansion modules.
1. Naming rule
Naming rule of LX3V I/O output expansion module:
①WECON PLC;
②Main module;
③Expansion module;
④Product type, E means expansion;
⑤Expansion output(Y);
⑥T: transistor, R: relay;
2. Dimensions
①Extension cable and connector
②State LED: Light when normal condition
③Power LED: Light when connect to 24V
④Module name

Output expansion module
2 WECON Technology Co., Ltd.
⑤digital signal output terminal
⑥Extension module interface
⑦DIN rail mounting slot
⑧DIN rail hook
⑨Mounting holes (φ4.5)
2.1Crimp terminations
3. Output specification
Item
Relay output
Transistor output
Mode
LX3V-16EYR
LX3V-16EYT
Output circuit
Power supply
Less than AC250V or DC 30V
DC 5V~ 30V
Circuit insulation
Mechanical
Photo-coupling
LED
Light when relay is energized
Light when photo-coupling is
energized
Load
Resistance
2A/ point
8A/ four points
8A/ eight points
0.5A/ point
0.8A/ four points
1.6A/ eight points
Inductance
80VA
12W/DC24V
Lamp
100W
1.5W/DC24V
Leakage current
--
0.1mA/ DC 30V
Please use crimp terminals as indicated on the graph.
The tightening torque should be applied 5 to 8 Kg.cm.
Other terminals should be empty but only wiring
terminals mention in this manual.

Output expansion module
2 WECON Technology Co., Ltd.
Minimum load
--
DC 5V 2mA
OFF->ON
About 10ms
Less than 0.2ms
ON-> OFF
About 10ms
Less than 0.2ms
Version: V1.0.1
Date: March 2018