Weider 831.280830 User manual

USERÕS MANUAL
Patent Pending
Model No. 831.280830
Serial No.
The serial number can be found in the
location shown below. Write the serial
number in the space above.
CAUTION
Read all precautions and instruc-
tions in this manual before
using this equipment. Save this
manual for future reference.
SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179
Serial Number Decal (under frame)

2
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ADJUSTING THE BODY WORKS GYM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
FULL 90 DAY WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read the following important precautions before
using the gym.
1. Read all instructions in this manual before
using the gym.
2. It is the responsibility of the owner to ensure
that all users of the gym are adequately
informed of all precautions.
3. Use the gym only as described in this manual.
4. Use the gym only on a level surface. Cover
the floor beneath the gym for protection.
5. Inspect and tighten all parts each time you
use the gym. Replace any worn parts imme-
diately.
6. Keep hands and feet away from moving parts.
7. Always tie back long hair to prevent it from
becoming caught.
8. Keep children under 12 years old and pets
away from the gym at all times.
9. The gym should not be used by persons
weighing more that 250 pounds.
10. Always wear athletic shoes for foot protec-
tion while exercising.
11. Always be sure that the tab on the adjust-
ment leg is inserted completely into the
incline leg before using the gym.
12. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cool-
ing down.
13. The gym is intended for home use only. Do
not use the gym in any commercial, rental, or
institutional setting.
WARNING: Before beginning this or any exercise program, consult your physician. This is especially
important for persons over the age of 35 or persons with pre-existing health problems. Read all
instructions before using. SEARS assumes no responsibility for personal injury or property damage
sustained by or through the use of this product.

3
BEFORE YOU BEGIN
Thank you for selecting the WEIDER¨BODY WORKS
gym. The versatile BODY WORKS gym is designed to
help you develop every major muscle group of the
body. Whether your goal is a shapely figure, dramatic
muscle size and strength, or a healthier cardiovascular
system, the BODY WORKS gym will help you to
achieve the specific results you want.
For your benefit, read this manual carefully before
using the BODY WORKS gym. If you have additional
questions, please call our toll-free HELPLINE at
1-800-736-6879, Monday through Saturday, 7 a.m.
until 7 p.m. Central Time (excluding holidays). To help
us assist you, please note the product model number
and serial number before calling. The model number is
831.280830. The serial number can be found on a
decal attached to the BODY WORKS gym (see the
front cover of this manual).
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Foot Plate
Rail
Handle
Hand Grip
Adjustment Leg
Incline Leg
Stabilizer
Seat

4
1. Lift the Rail (1) until the tab on the Adjustment Leg
(6) can be inserted into a slot in the Incline Leg (5).
Be sure that the tab on the Adjustment Leg is
fully inserted into the slot in the Incline Leg.
2. Slide the Upper Bar (7) into the Rail (1). Using the
included allen wrench and an adjustable wrench,
attach the Upper Bar to the Rail with four 3/8Ó x 3/4Ó
Button Head Bolts (35) and four 3/8Ó Nylon Locknuts
(33). Be sure that the Cord (11) is correctly routed
around all pulleys and that the pulleys and Cord
move smoothly.
Press the Rail Cap (10) into the Rail (1). Press two
Tree Fasteners (46) into the Rail Cap.
Insert the ends of the Foot Straps (37) through the
Strap Rings (39). Press the fastener strips on the
ends of the Foot Straps onto the other fastener strips.
3. Press a Round Cap (17) onto each side of the
Stabilizer (4).
2
1
3
ASSEMBLY
11
7
37
37
39
39 10 46
1
17
4
35
35
33
33
Before beginning assembly, carefully read the
following information and instructions:
¥ Place all parts of the BODY WORKS gym in a
cleared area and remove the packing materials;
do not dispose of the packing materials until
assembly is completed.
¥ Read each assembly step before you begin.
¥ As you assemble this product, make sure that all
parts are oriented as shown in the drawings.
¥Assembly requires the following tools:
The included allen wrench
Your own adjustable wrench
1
5
6

5
ADJUSTING THE INCLINE
The incline of the BODY WORKS gym can be adjusted
to change the resistance level of your workout.
To adjust the incline, lift the Rail (1) until the tab on the
Adjustment Leg (6) can be removed from the slot in the
Incline Leg (5). Raise or lower the Frame to the desired
incline and insert the tab on the Adjustment Leg into the
desired slot in the Incline Leg. Be sure that the tab on
the Adjustment Leg is fully inserted into the slot in
the Incline Leg.
ADJUSTING THE FOOT STRAPS
To adjust the Foot Straps (37), first slide your feet into
the Foot Straps as shown. Pull each Foot Strap with
your hand until it is tight over your foot without being
uncomfortable. Press the fastener strip on the end of
the Foot Strap onto the other fastener strip. Be sure
that the fastener strips are correctly fastened.
STORING THE BODY WORKS GYM
The BODY WORKS gym can be folded flat for easy
storage in a closet or under a bed.
Slide the Seat (2) up toward the Upper Bar (7) and fold
the Foot Plate (3) down onto the Rail (1). Slide the Seat
back down until it rests on the Foot Plate.
Lift the Rail (1) until the tab on the Adjustment Leg (6)
can be removed from the slot in the Incline Leg (5).
Pivot the Adjustment Leg up against the Rail and lay
the BODY WORKS gym flat on the floor. Pull the Cord
(11) tight and hang the handles on the Upper Bar (7).
ADJUSTING THE BODY WORKS GYM
The BODY WORKS gym is designed to use your own body weight as resistance. The steps below explain how
the gym can be adjusted and folded for storage. Refer to the accompanying exercise poster to see the correct
form for each exercise.
Inspect and tighten all parts each time you use the gym. Replace any worn parts immediately. The gym can be
cleaned with a damp cloth and mild, non-abrasive detergent; never use solvents.
1
5
6
2
3
37
37
1
7
6
5
Handle
11

6
Key Part
No. Qty. No. Description
1 1 141101 Rail
2 1 141217 Seat
3 1 141119 Foot Plate
4 1 141108 Stabilizer
5 1 141112 Incline Leg
6 1 141196 Adjustment Leg
7 1 141186 Upper Bar
8 4 121576 1/4Ó Nylon Jam Nut
9 1 141191 Seat Bracket
10 1 140842 Rail Cap
11 1 141509 Cord/Handle
12 1 141211 Roller Axle
13 1 141210 Adjustment Axle
14 1 141061 Incline Axle
15 1 114058 Foot Plate Axle
16 1 141510 Foot Plate Cap
17 2 130656 Round Cap
18 2 106697 Roller
19 2 141273 Roller Bushing
20 4 141060 3/4Ó Bushing
21 2 103735 Dome Cap
22 4 113106 Bumper
23 4 013322 #8 x 3/4Ó Button Head Bolt
Key Part
No. Qty. No. Description
24 4 013556 5/16Ó x 3/4Ó Screw
25 8 013456 1/4Ó x 1Ó Screw
26 2 141056 Small Pulley
27 2 124590 Large Pulley
28 2 141202 Pulley Housing
29 4 141275 Housing Bushing
30 2 141212 Housing Spacer
31 4 141209 Wheel
32 2 119425 3/8Ó Nylon Jam Nut
33 12 012149 3/8Ó Nylon Locknut
34 4 141226 3/8Ó x 1 3/4Ó Bolt
35 8 141225 3/8Ó x 3/4Ó Button Head Bolt
36 2 141214 6Ó Grip
37 2 141231 Foot Strap
38 2 141213 Grip Spacer
39 2 141216 Strap Ring
40 2 141215 5Ó Grip
41 2 131411 Support Bushing
42 2 141224 3/8Ó x 3.17 Button Head Bolt
43 2 142790 Tree Fastener
44 4 142791 Spacer
# 1 141816 UserÕs Manual
# 1 140721 Exercise Poster
Ò#Ó Indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover for
information on ordering replacement parts.
PART LISTÑModel No. 831.280830 R1197A

7
11
25
9
2
31
8
40
40
39
39
38
38
37
37
733
42
35
35
22
22
23
25
25
36
36
31
8
34
34
26
26
33
33
29
30
29 34
33
32
27
10
1
24
24
41
41
13
6
12
19
18
18
19
5
20
20
14
16
3
20
21
21
15
17
17
4
22
23
22
23
35
35
28
20
33
25
44
44
44
44
43
EXPLODED DRAWINGÑModel No. 831.280830 R1197A

Part No. 141816 G03767-C R1197A Printed in Canada © 1997 Sears, Roebuck and Co.
Model No. 831.280830
QUESTIONS?
If you find that:
¥ you need help assembling or
operating the WEIDER¨BODY
WORKS gym
¥ a part is missing
¥ or you need to schedule repair
service
call our toll-free HELPLINE
1-800-736-6879
MondayÐSaturday, 7 amÐ7 pm
Central Time (excluding holidays)
REPLACEMENT
PARTS
If parts become worn and need to
be replaced, call the following toll-
free number
1-800-FON-PART
(1-800-366-7278)
The model number and serial number of your WEIDER¨BODY
WORKS gym are listed on a decal attached to the frame. See the
front cover of this manual to find the location of the decal.
All replacement parts are available for immediate purchase or
special order when you visit your nearest SEARS Service Center.
To request service or to order parts by telephone, call the toll-free
numbers listed at the left.
When requesting help or service, or ordering parts, please be
prepared to provide the following information:
¥ The MODEL NUMBER of the product (831.280830).
¥ The NAME of the product (WEIDER¨BODY WORKS gym).
¥ The PART NUMBER of the PART (see the PART LIST on page
6 of this manual).
¥ The DESCRIPTION of the PART (see the PART LIST on page
6 of this manual).
FULL 90 DAY WARRANTY
For 90 days from the date of purchase, if failure occurs due to defect in material or workmanship in this
SEARS WEIGHT BENCH EXERCISER, contact the nearest SEARS Service Center throughout the
United States and SEARS will repair or replace the WEIGHT BENCH EXERCISER, free of charge.
This warranty does not apply when the WEIGHT BENCH EXERCISER is used commercially or for rental
purposes.
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179