Well LEDWLN-CRYSTAL-1-WL User manual

INSTRUCTION MANUAL
MODULAR LED LIGHT
Thank you for choosing WELL. Please read carefully the following instructions and keep them
within reach.
Reorder No: LEDWLN-CRYSTAL-1-WL, LEDWLN-CRYSTAL-6-WL

Functional description:
The touch modular LED system splices hexagonal modules together by magnetic
attraction. Users can DIY splice different patterns according to different numbers
of modules, which can give consideration to wall lighting and decoration.
Product classification:
Conventional touch module, powered by AC/DC 12 V.
Usage:
The sensor will detect the user's operation and execute the corresponding light
on or off mode only by lightly touching the module to be lit.
Installation steps:
Select the installation location
you want and ensure that the
socket is at a sufficient distance
from the wire.
Connect the power supply
to the rear of a single
hexagonal lamp panel.
Drill hole on the back of the
wall and fix the first hexagon
on the wall with nails.
Nail installation distance
schematic template
Use glue and other means to fix on the wall.
(Special reminder: when splicing large light
screens, it is recommended to reinforce the
modules in the middle with nails, which will
give strong support to the surrounding modules).

Note:
This product is not suitable for children or the weak.
Do not expose this product to sunlight or damp areas.
Please use the factory configured power adapter and do not use other power adapters.
It is strictly prohibited to put this product into a fire source or close to a high temperature source
to avoid fire and explosion hazards.
If the product has quality problems, please contact the merchant for repair or replacement.
Unauthorized disassembly or rough use is strictly prohibited.
Do not pull the power cord plug hard. Press and hold the module connected to
the power supply with one hand, hold the plug with the other hand and gently pull it out.
Splicing each hexagonal body
together, and mutually adsorbing
the modules through magnetic
force.
After the module splicing is completed,
gently touch with your hand to ensure
that each hexagonal lamp panel can
emit light.
Just touch the module you want
to light with your hand, and the
built-in sensor will detect your
operation and execute the
corresponding light switch
operation. Do not operate with
explosive force.
Under light, let’s share your design.

Product maintenance:
Before cleaning the product, please disconnect the power supply of the system, wipe the surface
of the test module with dry cloth, do not clean with liquid or corrosive materials, and do not
scratch the shell with hard objects.
Specifications
LEDWLN-CRYSTAL-1-WL:
Product material: ABS+PC
Number of LED: 36x 0.2W
Power supply: 12V, 2A
Color temperature: 4000K
Luminous flux: 150lm
Average Lifetime: ≥10000h
Casing color: white
Module size: 100x115x18mm
Package content: 1x LED hexagonal light, sticker, user manual
Power adapter is not included
LEDWLN-CRYSTAL-6-WL:
Product material: ABS+PC
Number of LED: 36x 0.2W
Power supply: 12V, 2A
Color temperature: 4000K
Luminous flux: 900lm
Average Lifetime: ≥10000h
Casing color: white
Module size: 100x115x18mm
Package content: 6x LED hexagonal light, power adapter, 6x stickers, user manual
Waste electrical and electronic equipment are a special waste category,
collection, storage, transport, treatment and recycling are important
because they can avoid environmental pollution and are harmful to
health. Submitting waste electrical and electronic equipment to special
collection centers makes the waste to be recycled properly and
protecting the environment. Do not forget! Each electric appliance that
arrives at the landfill, the field, pollutes the environment!
Importer & distributor:
SC VITACOM ELECTRONICS SRL
CIF: RO 214527
Tel. [phone]*
[email protected], www.vitacom.ro