Well REC-DVBT2-VISION-WL User manual

INSTRUCTION MANUAL
DIGITAL VIDEO BROADCASTING
Thank you for choosing WELL. Please read carefully the following instructions and keep them
within reach.
Reorder No: REC-DVBT2-VISION-WL

MAIN MENU
INSTALLATION GUIDE
If you are using the receiver for-the first time or have restored the receiver to Factory Settings, the Welcome Screen
will appear on your TV screen.
Press OK to start scanning channels.
OSD Language: Select a Language.
Country: Select a Country.
FTA Only: Two options All/FTA. All is for encrypted and free channels, FTA just be for free channels.
Search Mode: DVB-T2
Antenna Power: On/Off, that is to control antenna 5V power supply. Set to ON when having an active antenna
without power adapter. Set to OFF when having passive antenna or active antenna with power adapter.
Channel Search: Press OK to start scanning channels automatically.
SEARCH
Search Mode: DVB-T2
FTA Only: Two options All/FTA. All is for encrypted and free channels, FTA just be for free channels.
Auto Search: Automatic searching and saving available TV channels.
Manual Search: Manual searching for TV channels. You can search the channel by number or frequency. When you
choose the desired options, press Search to start searching.
Country: Select a Country.
Antenna Power: On/Off, that is to control antenna 5V power supply. Set to ON when having an active antenna
without power adapter. Set to OFF when having passive antenna or active antenna with power adapter.
PROGRAM
CHANNEL EDIT: This menu enables you to edit channel lists by locking, deleting, skipping, moving channels
and creating favorite channel lists.
If you want to preview the channel, select it and press OK.

Delete
Press 1 button on the remote control and then press OK. The channel will be marked with an icon. Press the EXIT
button to confirm changes and press OK to save it.
Move
Select achannel and press 2button. Then press OK. The channel will be
marked with an icon. Usethe up and down buttons on the remote control, to select
new position for this channel and press OK. The channel will be moved to the selected position.
Note! If you want to move channels in anew position, the LCN option should be OFF.
Skip
Select achannel and press 3button. Then press OK. The channel will be
marked with an icon. Press EXIT button to confirm changes. The selected channel
will be skipped when you switch channels. To unskip, select this channel, press
3button and confirm by pressing OK.
Lock
Select achannel and press Red button on the remote control. Then press OK and
input the default password ”000000”. The channel will be marked with an icon. Press
the EXIT button to confirm changes. The selected channel will be locked. If you
want to unlock, select this channel, press 4button and input”000000” press OK to unlock channels.
FAV
Select achannel and press 5button on the remote control. Then
press OK. Afavorite list will be displayed.
Choose one of the lists and press OK. Then press EXIT button to confirm changes.
The selected channel will be saved in that list (it is now marked with an icon).
Use left and right buttons on the remote control to switch between channel lists. To delete channel from the favorite l
ist, select the channel, press 5button
and then press OK. Favorite channel list will be displayed. Press OK button again.
Then, you can exit menu to confirm the changes. The channel will be deleted from the favorite list.
PROGRAM GUIDE:
Enter EPG, press GREEN button to check Day- channels guide.
Press EPG button on the remote control to enter Electronic Program Guide.
Use Up and down buttons on the remote control to navigate the program.
Choose program you want, press right button on the remote control and use up and down buttons of RCU to choose
channels at different time period. Press OK to check channels detailed information.
Press red button to do a timer to watch selected channels in time, press exit button to save the schedule, the channels
will be marked with a green dot icon.
SORT: You can sort the channels by LCN/TP/ID/Name
LCN: ON/OFF
LCN (Logical Channel Number): Choose if you want to sort the channels according to their logical channel number.
PICTURE
ASPECT RATIO:
Available options: Auto, 16:9 wide screen, 16:9, 4:3, full screen. The default value is Auto.
Resolution/TV format: Choose PAL, relative resolution will be 576i/720p/1080i/1080p.Choose NTSC, relative

resolution will be 480i/480p/720p/1080i/1080p.
OSD SETTING:
Transparency: Set the OSD transparency from 0% to 60%.
Brightness: Set the OSD transparency from 20% to 100%
Chroma: Set the OSD transparency from 20% to 100%
Contrast: Set the OSD transparency from 20% to 100%
OSD Timeout: Select the duration of displaying Info bar, 3s,5s and 8s for optional.
PANEL SETTING:
LED BRIGHTNESS: Adjust LED brightness of front panel. There are three levels: full/low/middle.
LED DISPLAY: Time/Ch no. Choose time to display current time in LED and choose Ch no. to display current
channel number.
SYSTEM
Parental Guidance: Set the age limit for channels. The age range is from 4~18.Limited channels will be protected
by a password”000000”. Default value is Off.
Lock Control: Press “000000” password to enter menu to set menu lock/channel lock.
Menu lock is used to control the limit of menu operation, searching channels and SW upgrading.
Channel lock is used to control the limit of channel edit.
New Password: Enter new password.
Confirm Password: Confirm the new password.
Note: Default Password is 000000. There is also aMaster PIN, in case of forgetting
the password that you were set. The mater PIN is 873543.
Factory Reset: If you choose to restore Factory Settings, the Channel Lists and all Settings will be deleted. Entering
password is “000000”.
System information: Displays Information about the Lib, application, hardware version.
Software Upgrade: USB Upgrade
Section: All
File Path: Choose correct software bin file
Start: Press OK to start upgrading process.

Power on Control: Power On/Standby/Last state
Power on: Receiver will keep power on after power off and power on.
Standby: Receiver will keep standby after power off and power on.
Last state: Receiver will restore last state after power off and power on.
TIME REGION AND TIME:
Time Offset: Auto/Manual
Region: City selected according to country setting.
Time Zone: If Auto, this setting will set time based on our current country automatically. If manual, this setting can
be revised by manually.
Summer Time: ON/OFF.
Sleep (HOUR): Set the sleep time after no any operation. You can set OFF or from 1~12hours.
Timer Setting:
Mode: Play
Type: Once/Daily/Mon./Tues./Wed./Thur./Fri./Sat./Sun.
Start Date: Set the start date to start up watching channels you scheduled.
Start Time: Set when scheduled channels will be started.
Channel: Choose which channel you want to watch in time.
After setting well, press EXIT to save schedules.
Press RED to delete schedule,
Press Green button to add new schedule,
Press Yellow to edit channels. Press Blue button to delete all schedules.
Power On/Off: Set time when device power on, and set time when device power off.
OPTION
OSD Language: Select the language of the Menu
EPG Language: Select the language of EPG
Subtitle language: ON/OFF
TTX language: Select the language of TTX.
First Audio Language: Select First Audio Language
Second Audio Language: Select Second Audio Language
Digital Audio: Auto/PCM/Bypass

Auto, receiver will detect digital audio automatically.
PCM, receiver will decode digital audio.
Bypass, external device will decode digital audio.
USB
Media Centre: File/Video/Music/Picture
Make sure the USB drive is connected to the device.
PVR Media
PVR Management
Internet: Two network application can be used. One is for weather, to check weather of different cites. Another is for
RSS reader, to check news from Yahoo and BBC.
Waste electrical and electronic equipment are a special waste category, collection,
storage, transport, treatment and recycling are important because they can avoid
environmental pollution and are harmful to health. Submitting waste electrical and
electronic equipment to special collection centers makes the waste to be recycled
properly and protecting the environment. Do not forget! Each electric appliance that
arrives at the landfill, the field, pollutes the environment!
Importer & distributor:
SC VITACOM ELECTRONICS SRL
CIF: RO 214527
Tel. [phone]*
[email protected], www.vitacom.ro