Wellclima Wall K-650E User manual

Connected to www.wellclima.com website, find air conditioner
brand in the ‘CODE LIST’ of PLUS model and check the first set
of codes.
Press and hold SET button, then press POWER button and
hold them down. Release the two buttons when the model code
‘----’ flashes on the screen window. Press ‘TEMP▲’ or ‘TEMP▼’
until the code found in Step 1 appears on the screen window
(you can keep the TEMP keys pressed to scroll the codes faster).
Press the SET button to exit, check the button functions. If the
device respond correctly the setting is finished, if not, please
repeat steps 2 and 3 with next set of codes.
LOOK OUT: when the codes are separated by a - sign it means
all the numbers between the first and the last (es LG 3600-3609
you have to test codes 3600, 3601, 3602.....>3609). If none of
the codes work with your air conditoner or if your brand is not in
the list don’t worry, proceed with the Automatic Code Search.
The remote control can be set to 3 different modes. Choose mode
A if the brand of your air conditioner is among those in the image
below, or modes B or C for all other brands.
BRAND POINT-TO-POINT QUICK SEARCH
1. Aim the remote control towards the air conditioner receiver window.
2. Press and hold the appropriate code button corresponding to your
A/C brand (for example ▲button for LG and Samsung brand) until
the air conditioner turns on and you hear a ‘beep’ sound;
release the button, and the setting is completed.
3. Check the button functions. If the buttons work correctly, the code
setting is effective. If not, please repeat steps 2 and 3.
Thank you for choosing a Wellclima product.
Before use please insert two alkaline batteries 1,5V type AAA and
plug-in the Air conditioner to the electric line.
You have purchased one of the best remote controls on
the market, covered by legal guarantee. For warranty
information please contact us.
Please read the Operating Instructions carefully before
using the product and store it in a safe place for future
reference
www.wellclima.com
UNIVERSAL A/C
REMOTE CONTROL
other languages on wellclima.com
1. Temperature +
2. Wind Speed
3. Change Mode
4. Manual Wind Direction
5. Automatic Wind Direction
6. Timer ON
7. Timer OFF
8. E A Heating
1. Automatic Wind Direction
2. Manual Wind Direction
3. Wind Speed
4. Mode Option
5. Signal Indicator
6. Temperature
9. POWER ON/OFF
10. Fast Heat
11. Fast Cool
12. Setting
13. Select Celsius/Fahrenheit
14. Temperature -
15. Infrared Signal Transmitter Port
16. Infrared Signal Transmitter Port
7. E A Heating
8. Child-Block
9. Power-on Timer
10. Fahrenheit (°F)
11. Degrees Celsius (°C)
12. Power-o Timer and Code Display
Wall K-650E

C
AUTOMATIC CODE SEARCH FOR APPLICABLE MODEL
Aim the remote towards the air conditioner receiver window.
Press and hold SET button, about 6 seconds later the model
code ’----‘ starts to flash, do not release the button until the air
conditioner switches on automatically.
Release the SET button immediately when the conditioner
turns on and check the button functions. If the buttons work
correctly, the code setting is effective. If not, please repeat
steps 2 and 3.
A complete scan of all codes takes about 30 minutes. Do not stop
the search before, or before the air conditioner switches on.
Celsius/fahrenheit function “C/F”
Press “C/F” button to choose “Celsius” or “Fahrenheit.
Child lock function
Lock: Keep pressed SET and then M.SWING buttons.
The screen displays the Child Lock icon.
Unlock: Keep pressed SET and then M.SWING buttons.
The ‘Child Lock ‘ icon disappears.
Clock function setting
a. Keep pressed SET and then press MODE buttons until
the hour digits flash.
b. Press the TEMP▲(or TEMP▼) button to increase (or
decrease) by 1 hour.
c. Press the SET button to complete setting the hour. Now
the minute digits flash. Press the TEMP▲or TEMP▼
button to set the minutes.
d. After the minutes are set, press the SET button to exit
clock setting.
Timer on/off function
The remote control is equipped with the timer function of the
original AC remote. Press the TIME ON or TIME OFF
buttons (one press for one hour), the air conditioner timer
light will switch on.
This means that the air conditioner timer function is now
operational.
This function requires the air conditioner to have the timer
function, or else this button will not work.
*
Battery replacement memory
Backlight
ANY PROBLEMS?
In compliance with directive 2012/19/EU D.L. N°49/2014
Multiservizi (owner of wellclima brand) being the suppliers
of this products issues the following information: it is mandatory
not to dispose of the RAEE as if they were urban waste, but to
carry out a separate collection of them.
When delivering the equipment upon purchase of a new one, the
same manufacturer shall provida in re-using, recycling it or other
forms of recycle through measures implemented and approved
by the public administrations. Such information is supplied in order
to prevent potential effects on the enviroment and human healt
due to the presence of dangerous substances in electronic
equipments or due to an improper use of the same.
Therefore every electronic equipment sold shall subject to this
directive and shall be marked with the symbol shown here below.
RESTORE TO FACTORY SETTING
Press and hold SET button and then press FAN button and hold
them down about 3 seconds to restore the factory settings.
The remote control's chip has a built-in memory function, ensuring
that there is no need reset for a short-term power off like battery
replacement etc.
The backlight covers the whole panel. Press any button lo light it
and it will switch off alter 10 seconds if there is no operation.
This remote control is compatible with 99% of brand of air conditio-
ners, we perform compatibility tests with the various brands and the
codes are constantly updated.
It can operate only if the air condiotioner receiver works well. To
check if the new remote works (or even the old one) we suggest you
to do this test: frame the led that you find on the top edge with a
digital camera or a smartphone (not iphone), press the on-off button
several times, through the camera you will see the LED light up
slightly. If the led turns on the remote control transmits, if you have
tried the various setup methods and the air conditioner has never
turned on it is probable that the problem is in the receiver inside the
control unit, in this case you must contact the service.
If you find any other problems or remote control cannot be used
appropriately, please visit HELP and FAQs page on our website
www.wellclima.com or contact us and we will provide our best
service for you.
All rights reserved - Copiright Multiservizi
Unauthorized reproduction of all or part of this guide are prohibited.
Imported by Multiservizi - Capriano del Colle - BS - Italy
Design and techincal parameters
may vary without notice.
INSTRUCTIONS FOR ADDITIONAL FUNCTIONS
4.
Fast cooling and Fast Heating
Fast cooling: Premere “F.COOL” per impostare la temperatura
a 21° aria forte e movimento automatico.
Fast heating: Premere “F.HEAT” per impostare la temperatura
a 27° aria forte e movimento automatico.
IT
Ti ringraziamo per aver acquistato questo telecomando.
Puoi visualizzare o scaricare le istruzioni dettagliate di questo
prodotto all’indirizzo:
https://wellclima.com/manuali/
o con la scansione di questo QRcode:
EN
Thank you for purchasing this remote control.
You can view or download detailed instructions for this product
at:
https://wellclima.com/en/manuals/
or by scanning this QR code:
FR
Merci d'avoir acheté cette télécommande.
Vous pouvez afficher ou télécharger les instructions détaillées
concernant ce produit à l'adresse suivante:
https://wellclima.com/fr/manuels/
ou en scannant ce QRcode:
ES
Gracias por haber adquirido este mando a distancia.
Puedes visualizar o descargar las instrucciones detalladas de
este producto en la dirección:
https://wellclima.com/es/manuales/
o con el barrido de este QRcode:
DE
Vielen Dank, dass Sie sich für diese Fernbedienung entschieden
haben.
Eine ausführliche Anleitung zu diesem Produkt können Sie unter
der folgenden Adresse:
https://wellclima.com/de/handbuecher/
oder durch Scannen dieses QR-Codes einsehen oder herunter-
laden:
PT
Obrigado por ter adquirido este telecomando.
Pode-se visualizar ou descarregar as instruções detalhadas
deste produto no endereço:
https://wellclima.com/es/manuales/
ou com a digitalização deste QRcode: