weltico A600 ELEGANCE User manual

15, rue des Marais BP3
44310 ST PHILBERT DE GRAND LIEU
FRANCE
Tel: [phone]
Fax: [phone]
www.weltico.com
[email protected]
weltico
Équipements du bassin
SKIMMER A600
BY
WELTICO
FR ... A
EN ... B
Other languages available on our website:
IT, DE, ES, PT, NL
IMPORTANT
- These instructions contain information on the installation and commissioning of the
appliance. As a result, it is essential that the installer and the user read these instructions
carefully before starting installation and starting up.
- It is recommended that a professional installer be asked to install this skimmer in accordance
with the current standards.
- It is mandatory to change, as soon as possible, any part or set of parts that may be damaged.
Only use parts authorized by the supplier/installer
- This product complies with the standards NF EN 13451-1 and NF EN 13451-3.
Pool equipment

LIST OF PARTS
ITEM no. REF DESCRIPTION
LINER
CONCRETE
Quantity
LINERPANEL
Quantity
1 62341 COMPLETEBARRIERWITHOUTSHAFT 1 1
2 80222 Skimmer TELESCOPE 1 1
3 80176 Skimmer COVER 1 1
4 62461 Skimmer 2008 BARRIER STOP 2 2
5 62513 STANDARD BASKET 1 1
6 60284 Skimmer BOTTOM SHUTTER 1 1
7 60469 STAINLESSSTEELSCREWA2DIN7982
No. 12X25.4 1 1
8 60392 SQUARE-HEAD PLUG 1 1
9 64327 A600 COUNTER FLANGE 1 1
10 64329 GASKET A600 2 2
11 64140 BAG OF SCREWS A600/A800 1 1
12 64141 BAG OF PANEL SCREWS A600 0 1
14 64328E ELEGANCE A600 SCREW COVERS 1 1
17 64130 MOUTH SKIMMER CLAMP A600 1 1
18 64139 MOUTH CLAMP A600 SKIMFILTRE 1 1
ASSEMBLY INSTRUCTIONS
SKIMMER A600 ELEGANCE
TECHNICAL SPECIFICATIONS:
VERSIONS: CONCRETE or PANEL/LINER or CONCRETE/
LINER or SHELL
• Manufactured in white ABS or WELTICO color
• Made in France
• Vertical ø50 mm or 1’’1/2 or 2’’ outlets plus a horizontal ø50mm outlet
• Overow ø50 mm
• Adjustment shutter
• Silent oating shutter
• UV treated
• Flow 7m3/h for the Ø50mm and 1’’1/2 outlets, 12m3/h for the 2’’ outlet.
TOOLS NEEDED:
- Screwdriver,
- Open end spanner,
- Level indicator,
- Cutter.
SKIMMER
UPON RECEIPT OF THE EQUIPMENT
You should have received a set of 2 packages:
• One package containing the mouth and its accessories.
• One package containing the SKIMMER part and its accessories.
- Level regulator option

CAUTION: once the two parts
(glued beforehand) are in contact,
it is almost impossible to separate
them after a few minutes.
1. BONDING
APPLY A
CONTINUOUS BEAD
OF GLUE ALONG
THE DOTTED LINE
BONDING SURFACE
MOUTH
BONDING SURFACE
SKIMMER
A
2. ASSEMBLY
A- Fit part 1 in the mouth.
B- Slide the clamps.
c- VERIFICATION: Ensure contact all around the junction.
>Horizontal outlet: Ø50mm inside (to be
opened if necessary).
>
Vertical outlet:
• External threaded BSP 2’’
• Internal tapped BSP 1’’1/2
• Ø50mm inside (to be opened if necessary).
DIMENSIONS
b
b

3.A ASSEMBLAGE PANNEAU
b).Une fois le skimmer en place, mettre le renfort dans la meurtrière
avant le coulage du béton ferraillé par-dessus.
635
155
a).Boulonner le skimmer sur le panneau à
l’aide des vis fournies.
bloc de scellement

3.B ASSEMBLAGE BETON 3.C ASSEMBLAGE COQUE
Préconisations pour le scellement :
- 30mm de béton minimum
- Fer à Béton de Ø12mm*
* Veillez à sufsamment dimensionner le ferraillage au-dessus de
la meurtrière pour éviter tout désagrément esthétique.
Préconisation remblais / coulage :
1. Caler le dessous du boitier du skimmer avant le coulage.
2. Contrôler le niveau du boitier lors du coulage et
du remblaiement ;
3. Effectuer le remblaiemen Avec du gravier 2/4 ou 4/6 autour du
skimmer.
NOTA : lors du scellement du
skimmer, le bloc de scellement
doit impérativement rester en
place jusqu’à séchage complet
du béton.
côté piscine
PRECONISATIONS POUR TOUT ASSEMBLAGE :
plage
piscine