STUDIO®MAKEUP STATION MIRROR REPLACEMENT
MIRROR REMOVAL
Warn ng: Always wear non-sl p work
gloves and safety glasses when
replac ng a damaged m rror.
Fa lure to observe th s warn ng
can result n ser ous njury.
1. With one person (wearing work gloves)
holding the Mirror in place and a second
person using a small phillips screwdriver (2-
inch blade length) or offset phillips
screwdriver, remove the two pan head
screws that hold the mirror in place. Set the
screws aside.
2. Using work gloves, slide the broken mirror
downward about one inch and then lift the
mirror away from the Station and set it
aside.
Warn ng: D spose of the broken m rror n a
safe manner. Fa lure to observe
th s warn ng can result n Injury
from sharp edges of broken
glass.
Mirror
an Head Screw
Sl de the M rror downward
unt l the top cl ps d sengage
the flange on the Frame.
Shelf Bottom Surface
Do not remove
the Counter.
Mirror
an Head Screw
Sl de the M rror upward
unt l the top edge of the
M rror engage the Top
Reta n ng Cl ps.
an Head Screw
Shelf Bottom Surface
Do not remove
the Counter.
1. With two people working together, place
the Mirror against the Frame with Mirror
Flange at the bottom and the top of the
Mirror about an inch from the Top
Retaining Clips.
2. Slide the Mirror upward until the Mirror
Flange contacts the Frame and the top
edge of the Mirror engages the Top
Retaining Clips.
3. With one person holding the Mirror in
place, use a small phillips screwdriver (2-
inch blade length) or offset phillips
screwdriver and attach the two an Head
Screws (set aside when the broken Mirror
was removed from the Frame) that hold
the Mirror to the Frame.
Caut on: T ghten the Pan Head Screws
only enough to be snug. Over
t ghten ng the Screws w ll str p
the threads n the Frame.
INSTALL THE NEW MIRROR
Warn ng: Two people must work together to nstall the new m rror. Fa lure to observe th s
warn ng can result n damage (dropp ng) and personal njury.
