Wesena eHDD User manual

Operator’s manual
eHDD
Make life colorful

Thank you for purchasing WESENA’s HTPC Chassis. We
recommend that you read this user guide thoroughly before
installation.
WESENA is the professional global supplier of HTPC cases, we
hold the professional product designing, the novel and
fashionable outside looking , humanistic inner structure of
it ,high-quality QC management and high-quality production
team. At the same time we are on the line of providing the high
quality products constantly , and will never stop innovating and
improving the theory of development in HTPC case . The
products, Both OEM and ODM are welcomed.
More information of our products visit http://www.wesena.com
Any other question please make call 400 6088 126
WESENA is not responsible for any damages due
to external causes, including but not limited to,
improper use, problems with electrical power,
accident, neglect, alteration, repair, improper
installation or improper testing.

Index
eHDD overview-------------------------------------------------------4
Open the Top panel-------------------------------------------------5
PSU installation -----------------------------------------------------5
HDD installation------------------------------------------------------5
Close the Top panel-------------------------------------------------7
PCB+cables reference diagram ---------------------------------8

1
eHDD overview
①. Operating indicator light
②. TOP panel
③. 60x60x15mm fan
④. Top plate open handling
⑤.HDD bracket
⑥.power anti-vibration pad
⑦.Power position
⑧. eSATA board
⑨.power switch
⑩.eSATA connector
⑪.HDD anti-vibration circle
⑫.LED
4
Model: eHDD
Material: 100% full Aluminum
Color：Silver / black / Gold
HDD drive bay：10×3.5”HDD drive bay
Cooling：2×60×60×15mm ultra-quiet fans+2×60×60×15mm fans bay
eSATA board bay: 2×eSATA board bay
Interface port：2×Standard eSATA port
Dimension：435mm×390mm×70mm (L×W×H)
Power Supply：Flex ATX PSU bay
Net Weight：5KG
2
4 7 95 6 10 10311 348 12

Top plate opening
Rotate top plate open handling,
open the top plate , and take out
the top plate
Shown as photos
Power installment
Put the power into the case , and
alignment holes , lock the screws.
Shown as photos
HDD installment
Take off HDD bracket screws,
and take out the HDD bracket
Shown as photos
5

Take out the 3.5inch HDD, and
put the HDD into the bracket, lock
the screws (shown as photos)
Put the bracket with HDD into the
chassis
Shown as photos
6

7
Top plate covering
To connect all the electronic components according to the power connect drawing
After finished the inner installment, recheck the installment place and the line connect,
and then cover the top plate
Shown as photos

Cables connect sketch map
220V felx atx
Take one HDD for example
Switch
LED
eSATA board
fan
8

Add: No. 809 8F A Area, Huameiju
Business Center, Xinhu Rd, Block
82 Baoan District Shenzhen, China
518102
Tel: [phone] 400 6088 126
Fax: [phone]
E- mail: i[email protected]om
http://www.wesena.com