Weslo Pursuit 4.8 Bike User manual

CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Serial Number
Decal
Model No. WLEX71007.0
Serial No.
Write the serial number in the
space above for reference.
USER’S MANUAL
Visit our website at
www.weslo.com
new products, prizes,
fitness tips, and much more!
QUESTIONS?
As a manufacturer, we are commit-
ted to providing complete customer
satisfaction. If you have questions,
or if parts are missing, PLEASE DO
NOT CONTACT THE STORE;
please contact Customer Care.
IMPORTANT: You must note the
product model number and
serial number (see the drawing
above) before contacting us:
CALL TOLL-FREE:
1-866-699-3756
Mon.–Fri. 6 a.m.–6 p.m. MST
Sat. 8 a.m.–4 p.m. MST
ON THE WEB:
www.wesloservice.com

2
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO OPERATE THE EXERCISE CYCLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
WESLO is a registered trademark of ICON IP, Inc.
WARNING DECAL PLACEMENT
The warning decal shown here
has been applied in the location
shown. If the decal is missing
or illegible, call the telephone
number on the front cover of
this manual and request a
free replacement decal. Apply
the decal in the location
shown. Note: The decal may
not be shown at actual size.

3
WARNING: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your exercise cycle before using your exercise
cycle. ICON assumes no responsibility for personal injury or property damage sustained by or
through the use of this product.
IMPORTANT PRECAUTIONS
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over the age of 35 or
persons with pre-existing health problems.
2. It is the responsibility of the owner to ensure
that all users of the exercise cycle are ade-
quately informed of all precautions.
3. Your exercise cycle is intended for home use
only. Do not use your exercise cycle in a
commercial, rental, or institutional setting.
4. Keep your exercise cycle indoors, away from
moisture and dust. Place your exercise cycle
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around your exer-
cise cycle to mount, dismount, and use it.
5. Inspect and properly tighten all parts regu-
larly. Replace any worn parts immediately.
6. Keep children under age 12 and pets away
from your exercise cycle at all times.
7. Your exercise cycle should not be used by
persons weighing more than 250 lbs.
(113 kg).
8. Wear appropriate exercise clothes while
exercising; do not wear loose clothes that
could become caught on your exercise
cycle. Always wear athletic shoes for foot
protection while exercising.
9. The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determin-
ing heart rate trends in general.
10. Keep your back straight while using your
exercise cycle; do not arch your back.
11. If you feel pain or dizziness while exercising,
stop immediately and cool down.
12. Use your exercise cycle only as described in
this manual.

4
Congratulations on selecting the new WESLO®
PURSUIT 4.8 exercise cycle. Cycling is one of the
most effective exercises for increasing cardiovascular
fitness, building endurance, and toning the body. The
PURSUIT 4.8 exercise cycle offers several features
designed to help you enjoy this healthful exercise in
the convenience and privacy of your home.
For your benefit, read this manual carefully before
you use the exercise cycle. If you have questions
after reading this manual, please see the front cover
of this manual. To help us assist you, note the product
model number and serial number before contacting
us. The model number and the location of the serial
number decal are shown on the front cover of this
manual.
To avoid a registration fee for any service needed
under warranty, you must register the exercise
cycle at www.wesloservice.com/registration.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Seat Knob Pedal/Strap
Console
Fan
BEFORE YOU BEGIN
Seat
Handgrip Pulse Sensor

5
M10 Nylon Locknut
(44)–4
M8 x 15mm Button
Screw (51)–4
M8 Nylon
Locknut (46)–3
M8 Washer
(53)–3
M10 x 70mm Carriage Bolt (16)–4
Acorn Cover
(35)–4
M10 Curved
Washer (54)–4
M8 Split
Washer (50)–4
M5 x 16mm
Self-tapping
Screw (52)–4
1. While another person lifts the rear of the Frame (1),
attach the Rear Stabilizer (7) to the Frame with two
M10 x 70mm Carriage Bolts (16), two M10 Curved
Washers (54), and two M10 Nylon Locknuts (44).
Next, press two Acorn Covers (35) onto the Nylon
Locknuts.
1
44
44
16
35
35
16
7
54
54
1
ASSEMBLY
To hire an authorized service technician to assemble the exercise cycle, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included
tools, assembly requires your own Phillips screwdriver and adjustable
wrench .
As you assemble the exercise cycle, use the drawings below to identify the small parts used in assembly. The
number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of
this manual. The number following the parentheses is the quantity used in assembly. Note: Some small parts
may have been preassembled. If a part is not in the parts bag, check to see if it has been preassembled.

6
3. Attach the Seat (4) to the Seat Post (34) with three
M8 Washers (53) and three M8 Nylon Locknuts (46).
Note: The Washers and Nylon Locknuts may be pre-
attached to the underside of the Seat.
Remove the Seat Knob (20) by turning it counter-
clockwise. Next, insert the Seat Post (34) into the
Frame (1). Align one of the adjustment holes in the
Seat Post with the indicated hole in the Frame.
Insert the Seat Knob into the Frame and the Seat
Post, and turn the Seat Knob clockwise until it is
tight. Make sure that the Seat Knob is inserted
into one of the adjustment holes in the Seat
Post.
46
4
53
46
20
Hole
1
34
53
3
2. While another person lifts the front of the Frame (1),
attach the Front Stabilizer (6) with two M10 x 70mm
Carriage Bolts (16), two M10 Curved Washers (54),
and two M10 Nylon Locknuts (44). Next, press two
Acorn Covers (35) onto the Nylon Locknuts.
54
54
1
35
35
6
2
16
44
44

7
5
5. The Console (5) requires four 1.5V “D” batteries
(not included); alkaline batteries are recommended.
IMPORTANT: If the exercise cycle has been
exposed to cold temperatures, allow it to warm
to room temperature before inserting batteries
into the Console. If you do not do this, the con-
sole displays or other electronic components
may become damaged. Press the tab on the bat-
tery cover and remove it. Insert four batteries into
the Console as shown. Make sure that the batter-
ies are oriented as shown by the diagram on the
battery cover. Then, reattach the battery cover.
Batteries
Battery Cover
5
4
50 50
51
57
56 51
1
2
51
4. While another person holds the Upright (2) in the
position shown, connect the Upper Wire Harness
(56) to the Reed Switch Wire (57).
Gently pull the excess Upper Wire Harness (56)
upward from the top of the Upright (2), and then
slide the Upright onto the Frame (1). Be careful to
avoid pinching the wires. Next, attach the Upright
with four M8 x 15mm Button Screws (51) and four
M8 Split Washers (50).
Be careful to
avoid pinching
the wires
Tab

8
8. Make sure that all parts are properly tightened before you use the exercise cycle. Note: After assembly is
completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor.
7. Identify the Left Pedal (10), which is marked with a
sticker. Using an adjustable wrench, firmly tighten
the Left Pedal
counterclockwise into the left arm of
the Crank (12). Tighten the Right Pedal (not shown)
clockwise into the right arm of the Crank.
Important: Tighten both Pedals as firmly as pos-
sible. After using the exercise cycle for one
week, retighten the Pedals. For best performance,
keep the Pedals tightened.
Adjust the strap on the Left Pedal (10) to the
desired position, and press the end of the strap
onto the tab on the side of the Left Pedal. Adjust the
strap on the Right Pedal (not shown) in the same
way.
7
10
Tab
12
6. While another person holds the Console (5) near
the Upright (2), connect the console wire harness to
the Upper Wire Harness (56).
Push the excess wire downward into the Upright
(2). Attach the Console (5) to the Upright with four
M5 x 16mm Self-tapping Screws (52). Be careful to
avoid pinching the wires.
5
6
2
52
56 Console Wire
Harness
Be careful to
avoid pinching
the wires

9
HOW TO OPERATE THE EXERCISE CYCLE
HOW TO ADJUST THE SEAT POST
For effective exer-
cise, the seat should
be at the proper
height. As you
pedal, there should
be a slight bend in
your knees when the
pedals are in the
lowest position. To
adjust the height of
the seat, first
remove the seat
knob by turning it
counterclockwise.
Next, slide the seat post upward or downward to the
desired position, and align one of the adjustment holes
in the seat post with the indicated hole in the frame.
Then, insert the seat knob into the frame and the seat
post, and turn the seat knob clockwise until it is tight.
Make sure that the seat knob is inserted into one
of the adjustment holes in the seat post.
HOW TO ADJUST THE PEDAL STRAPS
To adjust the pedal
straps, first pull the
ends of the straps off
the tabs on the ped-
als. Adjust the straps
to the desired posi-
tion, and press the
ends of the straps
onto the tabs.
Strap
Tab
Seat Post
Seat Knob
Hole
Seat

10
FEATURES OF THE CONSOLE
This advanced console offers a selection of features
designed to make your workouts more effective.
When you use the manual mode of the console, you
can change the resistance of the pedals with the
touch of a button. As you pedal, the console will pro-
vide continuous exercise feedback. You can even
measure your heart rate using the built-in handgrip
pulse sensor.
The console also offers eight preset programs that
automatically change the resistance of the pedals and
prompt you to vary your pedaling pace while guiding
you through an effective workout.
To use the manual mode of the console, see the
instructions on page 11. To use a preset program,
see page 13.
CONSOLE DIAGRAM
Program
Profiles
Pace
Guide
Program
Indicator