Weslo CADENCE 880 User manual

WESLO
CADENCE °88@
Model No. WLTL88060
Serial No.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satlsfaction. If you
have questlons, or find that there
are missing or damaged parts,
we will guarantee you complete
satisfaction through dlrect assis-
tance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our Customer Hot Line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.-Frl., 6 a.m.-6 p.m. MST
USER'S MANUAL

VVE LO
CADENCE"
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS ................................................................. 3
BEFORE YOU BEGIN ....................................................................... 4
WARNING DECAL PLACEMENT .............................................................. 5
ASSEMBLY ............................................................................... 5
OPERATION AND ADJUSTMENT ............................................................. 7
TROUBLE-SHOOTING AND STORAGE ........................................................ 11
CONDITIONING GUIDELINES ............................................................... 13
PART LIST ............................................................................... 14
EXPLODED DRAWING ..................................................................... 15
ORDERING REPLACEMENT PARTS .................................................. Back Cover
LIMITED WARRANTY ............................................................. _ .Back Cover
2

iMPO RTANT ..................................
! i:i:i:!_!:
;iilfol
3

BEFORE YOU BEGIN
Thank you for selecting the WESLO CADENCE ®880
treadmill. The CADENCE 880 treadmill blends
advanced technology with innovative design to offer
you an excellent form of cardiovascular exercise, in the
convenience and privacy of your home.
For your benefltt read this manual carefully before
using the treadmill. If you have additional questions,
please call our Customer Service Department toll-free
at 1-800-999-3756, Monday through Friday, 6 a.m.
until 6p.m. Mountain Time (excluding holidays). To
help us assist you, please note the product model
number and serial number before calling. The model
number is WLTL88060. The serial number can be
found on a decal attached to the treadmill (see the
front cover of this manual for the location).
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Endcaps
Rear Roller
Adjustment Bolts
SAFEKEY_/Cli
Accessory
Walking Belt
Leg
Console Towel Rack
Motor
Foot Rail
Bottle Holder
(Water Bottle is not
included)
'Pulse Sensor
FRONT
Circuit Breaker
Power C_
RIGHT SIDE

WARNING DECAL PLACEMENT
The decal shown at the right has
been placed on the console of your
treadmill.
Ifthe decal is missing, or if it is not
legible, please call our Customer
Service Department, toll-free, to
order a free replacement decal (see
ORDERING REPLACEMENT
PARTS on the back cover of this
manual). Apply the decal in the loca-
tion shown at the right.
ASSEMBLY
Set the treadmill in a cleared area and remove all packing materials. Do not dispose ofthe packing materials until
assembly is completed. Refer to the drawings below to identify small parts used inassembly. Assembly requires
an adjustable wrench _(not Included).
©
3/8" x 1 1/2" Washer
Flange Nut (54)-2 3/8" x 1" Bolt (7)-3
.Raise the Upright (20) to the vertical position. Slide the 3/8" x
1 1/2" Washer (27) onto the 3/8" x 1" Bolt (7). Insert the Bolt
intothe lower end of the Upright. Finger tighten the Bolt into
the Frame (46).
20
2, Ifthere are plastic ties in the upper ends ofthe Handrails (1),
cut them off. Insert the upper end of one of the Handrails into
the Console Housing (4). (Note: The two Handrails are identi-
cal. Due to the manufacturing process, there is a dimple near
the lower end of each Handrail. It makes no difference which
side the dimple is on when the Handrails are assembled.)
Finger tighten a 3/8" x 1"Bolt (7) intothe plate under the
Console Housing (4) and intothe Handrail.
Attach the other Handrail (1) in the same manner.

.Insert a 5/16" x 3" Bolt (71) into the lower end of the right
Handrail (1) and into the Frame (46). Reach under the Frame
and tighten a Flange Nut (54) onto the end of the Bolt.
Attach the other Handrail (1) (not shown) in the same manner.
Tighten all bolts used in steps 1 through 3.
54
46
4,
.
Remove the paper backing from the Adhesive Clip (16). Press
the Adhesive Clip onto the Right Endcap (45) in the indicated
location. Press the Allen Wrench (41) intothe Adhesive Clip,
The Console (5) requires three "AA" batteries (not includ-
ed). Alkaline batteries are recommended.
Slide up the Battery Cover (36). Press three batteries into the bat-
tery compartment, with the negative (-) ends of the batteries touch-
ing the springs. Close the Battery Cover.
55
Make sure that all parts are tightened before you use the treadmill. Note: To protect the floor or carpet from
damage, place a mat beneath the treadmill.

OPERATION AND ADJUSTMENT
THE PERFORMANT LUBE TM WALKING BELT
Your treadmill features a walking belt coated with
PERFORMANT LUBE TM, ahigh-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat-
form. They will deteriorate the walking belt and
cause excessive wear.
HOW TO PLUG IN THE POWER CORD
risk of electric shock. This product is equipped with a
cord having an equipment-grounding conductor and a
grounding plug. Plug the power cord Into a surge
protector, and plug the surge protector into an
appropriate outlet that is properly installed and
grounded in accordance with all local codes and
ordinances.
This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illus-
trated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge protector to a 2-pole recep-
tacle as shown in drawing 2 if a properly grounded out-
let is not available.
The temporary adaPter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home's power.
Voltage surges, spikes, and noise interference can
result from weather conditions or from other appli-
ances being tumed on
or off. To decrease the
possibility of your
treadmill being dam-
aged, always use a
surge protector (not
Included) with your
treadmill.
Surge protectors are
sold at most hardware
stores and department
stores. Use only a UL-
listed surge protector,
rated at 15 amps, with a
14-gauge cord of five
feet or less in length.
This product must be
grounded. If it should
malfunction or break
down, grounding pro-
vides a path of least
resistance for electric
current to reduce the
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified elec-
trician to determine if the outlet box cover is
grounded before using an adapter.
Treadmill
.j__ Grounded Outlet Box
_"D_..I __ Grounding Pin
'_unding Plug
\Grounded Outlei
Grounding
Surge Protector
7

DIAGRAM OF THE CONSOLE
Your treadmill has one of the two consoles shown below. Both consoles feature the same modes. The
operation of both consoles is described on pages 9 and 10.
CONSOLE 1
WESLO
Speed Control
Fit • I s G v ; d • EIs € Ir • n Ic =
ITO_J41NG WAJ_vlUP FATbURN ABIOE_ PE_ |ZC_S _v. .J
SPEEDRESETM_......... _ _,
inHJfmi 1
in
STEP_,STEP .;:.i_, INSE_ S'_EK_Y
OPEItATION: :_. I'_SS ON/CLEA_I_1"TON
::,._-. RESEtSPEED,11_ENBETTO D_BJREDLEVEL
Monitor Displays
J
F ,o,c,I]
IL(.-IJ
I, s.,'l]
SPEED
ON/CLEAR
Note: If there is a thin sheet of clear
plastic on the face of the console,
remove it. Be careful to avoid
spilling liquids on the console.
l"v_/DL_AN_
*I"
THUMB PJL.SE
k_nlL
Pulse Display
// •
20 I=s 141sI 141s
30 tto 13S lS3
410 IIS 1_10 14S
50 110 123 140
60 10| 113 130
70 9S 11@ t2S
80 to _o3 11s
•r-at Max. Aerobic
Burn Fat
CONSOLE2
WESLO
Fit
Speed Control
n e s s Guide E I e € t r e n I € $
w_k_ UP t_T_ ,_B_O_C I'_ 1
4ES 1
..... .--.. . ,J
i i i ii
OPEt _T_ON: .._: PRE_Oe4/l_ES_i_,rrtoN
:_.:. RESE1Sl_d_,_EN ,_T 10 DEStREDL_,'L%
Note: If there is a thin sheet of clear
plastic on the face ofthe console,
remove it. Be careful to avoid
spilling liquids on the console.
Monitor Displays
t
SPEED
i
I ]
ON /RESET
I ....
c._/FAT _
PULSE
Pulse Display
/
// "
P0/_E TRAINING ZONES
70 Its I _1o I t:s I
_,,p,,_,,,wr._: eO I _ol _: J_s I
Pulse Sensor
8

g precau_iohs '
STEP BY STEP CONSOLE OPERATION
Before operating the console, make sure that the power
cord is properly plugged in. (See HOW TO PLUG IN
THE POWER CORD on page 7.) In addition, make
sure that batteries are installed in the console. (See
assembly step 5 on page 6.)
Step onto the foot rails of the treadmill. Next, find the
clip attached to the SAFEKEY (see the drawing on
page 8). Slide the clip onto your waistband.
Follow the steps below to operate the console.
BInsert the SAFEKEY fully into the power switch.
Note: Inserting the
SAFEKEY will not turn
on the displays. The dis-
plays will turn on when
the ON/CLEAR (or
ON/RESET) button is
pressed or when the
walking belt isstarted, if you just installed batteries,
the displays will already be on.
BReset the speed control and start the walking belt.
Slide the speed con-
trol to the leftto the
RESET position.
Note: Each time the
walking belt is
stopped, the speed
i pit.=== eu=ll= ,ioc*.=._== !
control must be moved to the RESET position
before the walking belt can be restarted.
After you have moved the speed control to the
RESET position, slowly move itto the right until the
walking belt begins to move at slow speed.
Carefully step onto the walking belt and begin exer-
cising• Change the speed of the walking belt as
desired by moving the speed control.
To stop the walking belt, step onto the foot rails and
move the speed control to the RESET position.
Follow your progress with the monitor displays.
• CALJFAT CAL.
This display shows the
approximate numbers
of ca/ories and fat
ca/ories you have
burned. (See FAT
BURNING on page 13
for an explanation of
fat calories.) Every
seven seconds, the Indicators
display will automati-
cally change from one
number to the other. If you have monitor 1 (see
drawing 1), an =F"will appear when the number of
fat calories is displayed, if you have monitor 2
(see drawing 2), indicators will show which num-
ber is displayed•
• TIME/DISTANCE (or TIME and DISTANCE)
If you have monitor 1 1
(see drawing 1), this in.._n
;u._u
display shows both
the elapsed time and
the total distance you
have walked or run.
Every seven seconds, the display will automati-
cally change from one number to the other. When
the elapsed time is displayed, the left indicator will
appear; when the total distance is displayed, the
right indicator will appear.
If you have monitor 2
(see drawing 2), the
elapsed time and the
total distance willbe
shown in separate dis-
plays.
• SPEED
This display shows the
speed of the walking
belt, in miles per hour.
9

B
The displays can be
reset, if desired, by
pressing the ON/CLEAR
(or ON/RESET) button. ONICL_e "II
Measure your pulse, if desired.
To use the pulse
sensor, stand on
the foot rails and
place your thumb
on the pulse sen-
sor as shown.
The pulse sensor
ispressure-acti-
vated. Fully press
down the pulse sensor. Do not press too hard, or
the circulation In your thumb will be restricted,
and your pulse will not be detected. Next, slightly
raise yourthumb untilthe heart-shaped indicator in
the PULSE display
flashes steadily (if you
have monitor 1, see
drawing 1; if you have
monitor2, see drawing
2). Hold your thumb at
this level. After 5 to 10
seconds, your pulse will
be shown. Hold your
thumb on the sensor for
another 15 seconds for
the mostaccurate read-
ing. Ifthe displayed
Indicator
lilt;c31
Indicator
pulse appears to be too high or too low, or ifyour
pulse isnot displayed, liftyour thumb offthe sensor
and allow the display to reset. Press down again on
the sensor as described above.
Make sure that yourthumb is positioned as shown,
and thatyou are applyingthe proper amount of pres-
sure to the pulse sensor. Try the sensor several
times untilyou become familiar with it. Remember to
stand stillwhile measuringyour pulse.
ElWhen you are finished exercising, stop the
walking belt and
remove the
SAFEKEY.
Step onto the foot rails,
stop the walking belt,
and remove the SAFE-
KEY from the console.
Store the SAFEKEY in a secure place. After the
SAFEKEY is removed, the displays will remain
on for about five minutes.
Note: Any time that the walking belt is stopped
and no console buttons are pressed for five min-
utes, the displays will automatically turn off.
HOW TO CHANGE THE INCLINE OF THE TREADMILL
The incline of the treadmill can be changed by raising or
loweringthe back end. Before changing the incline,
remove the SAFEKEY and unplug the power cord.
Hold the Endca
in these locations
Incline
Leg
Hold the rear roller cover with both hands. When the
back end of the treadmill is in the lowest position,the
incline isabout 10%. Raise the back end until itclicks
into position.The incline willthen be about 5%. Raise
the back end again until it clicks into position. The
incline willthen be about 3%. To lower the back end,
first raise itpast the highest position, and then lower it.
CAUTION: Before exercising, push on the back of
the treadmill to make sure that the incline legs are
locked In position.
10