Westin Automotive Products 23-0500 User manual

1
Westin Automotive Products, Inc.
320 Covina Blvd
San Dimas, Ca. 91773
Thank You for choosing Westin products
For Additional installation assistance please call
Customer service [phone]
www.westinautomotive.com
P.N.: 75-0554RevC ECO #: W15-0011 DATE: 1/27/15
APPLICATION: STEP BAR / 88-98 CHEVY/GMC C/K Pickup, 92-94 CHEVY Blazer Fullsize,
95-99 CHEVY Tahoe - 2 door, 92-99 GMC Yukon - 2 door - Regular Cab
APP# 23-0500, 23-0505, 25-0500, 25-0505, 25-0630, 25-0635
25-0885, 25-0890, 26-0500, 26-0505, 26-0630, 26-0890
ITEM QUANTITY DESCRIPTION TOOLS NEEDED
12STEP BAR ASSEMBLY 19MM SOCKET
22FRONT MOUNTING BRACKETS 19MM WRENCH
32REAR MOUNTING BRACKETS TORQUE
WRENCH
44M12 LONG HEX HEAD BOLTS
541/2” SHORT HEX HEAD BOLTS
681/2” FLAT WASHER
781/2” LOCK WASHER
INSTALLATION INSTRUCTIONS
AUTOMOTIVE PRODUCTS, INC.
ANTI-SEIZE LUBRICANT MUST BE USED ON ALL STAINLESS STEEL FASTENERS TO PREVENT THREAD DAMAGE AND GALLING
1. Remove all contents from box, verify all parts listed are present and free from damage. Carefully read and under-
stand all instructions before attempting installation.
2. Attach brackets to vehicle body mounts using metric bolts as shown.
3. Attach step bar to bracket using 1/2” fasteners. NOTE: Use correct hole location for the rear leg of step bar for your
vehicle. Tube should not touch vehicle body.
4. Make sure step bar and brackets are properly aligned with vehicle and tighten fasteners. Recommended torque value
50-55 ft-lbs. for 12mm bolts and 64 ft-lbs. for 1/2” fasteners.

2
Westin Automotive Products, Inc.
320 Covina Blvd
San Dimas, Ca. 91773
Thank You for choosing Westin products
For Additional installation assistance please call
Customer service [phone]
www.westinautomotive.com
P.N.: 75-0554RevC ECO #: W15-0011 DATE: 1/27/15
CARE INSTRUCTIONS
 REGULAR WAXING IS RECOMMENDED. DO NOT USE ANY TYPE OF POLISH OR WAX THAT MAY CONTAIN ABRASIVES.
 STAINLESS STEEL PRODUCTS CAN BE CLEANED WITH MILD SOAP AND WATER. STAINLESS STEEL POLISH SHOULD BE USED TO POLISH SMALL SCRATCHES.
 GLOSS BLACK FINISHES SHOULD BE CLEANED WITH MILD SOAP AND WATER.
Full Assembly Brackets may look different
for different applications,
installation processes are the
same.