Westin Outdoor ID403 User manual

INSTRUCTION
MANUAL
29" Tufted Velvet Counter Stool
SKU: ID403
V1.0

CARE & MAINTENANCE
HARDWARE
PARTS
A
Page 1 of 5
14
25
34
M8x50MM
Flat washer
8PCS
Lock washer Allen Key Shorter
Screw
8PCS 1PC 4PCS 4PCS
Back
1PC
• Be careful when assembly, avoid hurting the paint .
• Clean the dust with lukewarm water, mild detergent & soft cloth.
• Firmly secure all bolts before use, do not use any part of this item as a step ladder.
• Reconfirm that all bolts, screws, and nuts are secure every 90 days.
• Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
M8x60MM
Longer
Screws
Φ8Φ8
M8
6
8PCS
Self-tapping
Screws
D
Hind Leg - Left
1PC
G
1PC
B
Front leg -Left
E
1PC
H
1PC
C
Front leg - Right
F
Side Footrest -Left
1PC
I
Hind Footrest
1PC
1PC 1PC
Hind Leg - Right
Side Footrest - Right Front Footrest
TOOLS REQUIRED
With Adjustable
Feet Leveler
With Adjustable
Feet Leveler
With Adjustable
Feet Leveler
With Adjustable
Feet Leveler
ALLEN WRENCH
(PROVIDED)
UP TO 20 MIN.
ASSEMBLY
2 PERSONS
ASSEMBLY
300 LBS
CAPACITY
LBS
SCREW DRIVER
(NOT PROVIDED)

PRODUCT AS SEMBLY
1
Page 2 of 5
80%
4
2
1
3
Put chair back on a clean
flat surface.
Align Hind legs in the seat
pad as shown in the diagram.
Using SHORTER SCREW
(4) with Washer (#2, 1).
DO NOT FULLY TIGHTEN.
First HAND tighten then
tightened using key up-to
60-80% only at this stage.
1
2
4
B
F
D
C
G
I
E
A
H
A
E
D

PRODUCT ASSEMBLY
3
Page 3 of 5
2
80%
5
2
3
Align front legs in the seat pad as
shown in the diagram.
Using LONGER SCREW (5)
with Washer (#2, 1 ).
DO NOT FULLY TIGHTEN.
First HAND tighten then
tightened using key up-to
60-80% only at this stage.
5
2
1
B
C
H
F
I
G
Align all footrest in the legs as
shown in the diagram.
1

PRODUCT ASSEMBLY
4
5
Page 4 of 5
F
FF
F
F
Using your own screwdriver
100% lock Self-tapping Screw
(5) as shown in the diagram
Put chair in the upright position and
SIT ON THE CHAIR to press downwards on
the seat pad.
Ensuring that all 4 feet touch the ground
and chair is leveled.
Proceed to tighten all screws making sure
the chair remains level when tightening.
Check that all screws are tight on a
regular basis to ensure chair remains level
and secure.
Also you can using adjustable feet to keep
four legs level .
100%
F
F
With Adjustable Feet Leveler

PRODUCT ASSEMBLY
6
Page 5 of 5
Then close the black fabric cover
7