Westinghouse WSFS1009BK User manual

10” 2 in 1 Stand and Floor Fan
Ventilateur à pied et pour plancher 10'' 2-en-1
Instruction Manual / Manuel d’instructions
WSFS1009BK
WSFS1009BK_2 in 1 High Velocity 10 Stand Floor Fan_2L.indd 1 5/12/2019 18:25:18

WSFS1009BK_2 in 1 High Velocity 10 Stand Floor Fan_2L.indd 2 5/12/2019 18:25:18

3
EN
CONTENT
SAFETY INFORMATION
IMPORTANT SAFEGUARDS....................................................................... 4
POLARIZED PLUG......................................................................................... 5
HOW TO USE
DESCRIPTION.................................................................................................. 6
OPERATING INSTRUCTIONS..................................................................... 7
CLEANING AND CARE ........................................................................ 8
MAINTENANCE ..................................................................................... 9
DISPOSAL............................................................................................... 9
INFORMATION AND SERVICE........................................................... 10
WSFS1009BK_2 in 1 High Velocity 10 Stand Floor Fan_2L.indd 3 5/12/2019 18:25:18

4
EN
SAFETY INFORMATION
Read this instruction manual carefully before using the appliance
and keep it for future reference.
1. Use this fan only as described in this manual. Using the fan for
other purposes may cause a fire, hazards or an electric shock.
2. This product is intended for household use. It is designed for
indoor, non-commercial, non-industrial and general domestic
use in cooling rooms and is not intended for use in windows.
Do not use the product outdoors or for any other purpose.
3. To prevent the risk of electrical shock, always use the fan on a
dry, level surface. Do not place the fan near windows, immerse
the unit, plug or cord in water, or spray with liquids.
4. Close supervision must be provided when the appliance is used
by or near children.
5. Unplug the unit from the mains outlet when left unattended or
not in use, when moving the fan from one location to another,
and before cleaning.
6. Never submerge the unit in water.
7. Do not operate the unit in the presence of explosive and/or
flammable fumes.
8. Do not place the unit or any parts near open flames or next to
cooking or other heating appliances.
9. Never insert fingers or any other objects through the fan
guards. Never drop or insert objects into any opening of the
product.
10. Never plug the unit in with wet hands or a wet cord.
IMPORTANT SAFEGUARDS
DANGER
DANGER – Immediate hazards
which WILL result in severe
personal injury or death
WARNING
WARNING – Hazards or unsafe
practices which COULD result in
severe personal injury or death
WARNING
When using electrical appliances, basic safety precautions
should always be followed, including the following
CAUTION
CAUTION – Hazards or unsafe
practices which COULD result in
minor personal injury
WSFS1009BK_2 in 1 High Velocity 10 Stand Floor Fan_2L.indd 4 5/12/2019 18:25:18

5
EN
SAFETY INFORMATION
11. Do not operate the unit with a damaged cord or plug. If the
cord or plug is damaged, discard the fan or return it to an
authorized service facility for examination and/or repair.
12. Avoid contact with moving fan parts.
13. To disconnect the fan from the power supply, grip the plug and
pull it from the outlet. Do not pull on the cord.
14. Do not operate if the fan housing has been removed or
damaged.
15. To prolong the lifespan of the product, do not use the fan
continuously for 24 hours a day.
16. WARNING: To reduce the risk of an electric shock or injury, do
not use the fan near windows.
17. WARNING: To reduce the risk of a fire or electrical hazards, do
not use this fan with a solid state speed control device.
POLARIZED PLUG
This appliance has a polarized plug (one blade
is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit in a
polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug, if it
still does not fit, contact a qualified electrician.
Do not modify the plug in any way.
DO NOTE ATTEMPT TO MODIFY THIS PLUG OR DEFEAT
THIS SAFETY FEATURE IN ANY WAY.
RETAIN THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
WSFS1009BK_2 in 1 High Velocity 10 Stand Floor Fan_2L.indd 5 5/12/2019 18:25:18

6
EN
DESCRIPTION
1
1
2
3
4
5
6
7
8
2
7
98
NO: NAME QTY
1 Fan head 1
2 Screw 1
3 Inner tube 1
4 Height adjustment knob 1
5 Outer tube 1
6 Cover ring 1
7 Screw 4
8 Base 1
9 Connection plate 1
HOW TO USE
WSFS1009BK_2 in 1 High Velocity 10 Stand Floor Fan_2L.indd 6 5/12/2019 18:25:18

7
EN
STAND FAN INSTRUCTIONS
1. Attach the outer tube (5) to the base (8) with the 4 screws (7)
as shown.
2. Loosen the height adjustment knob (4) on the outer tube and
extend the inner tube to the desired height.
3. Slide the cover ring (6) down the outer tube to rest on top of
the base.
Caution: The knob must be fully tightened before assembling
the fan head to the inner tube.
4. Secure the fan head (1) to the inner tube (3) with 1 screw (2).
FLOOR FAN INSTRUCTIONS
5. Attach the plastic connection plate (9) to the base (8) with the
4 screws (7) as shown.
6. Secure the fan head (1) to the connection plate (9) with 1 screw
(2).
OPERATING INSTRUCTIONS
WARNING: Do not use this product near windows, as this may
cause an electric shock or result in personal injury and/or damage
to property.
1. Place the fan on a dry, level surface.
2. Make sure the rotary switch is in the “0” (OFF) position. Plug
the unit into a 120 V/AC, 60 Hz mains outlet.
3. Adjust the fan head vertically to the desired angle.
4. To turn on the unit, turn the rotary switch to position “1” (LOW),
“2” (MEDIUM) or “3” (HIGH).
5. To stop the unit, turn the rotary switch to the “0” (OFF)
position, and then unplug the unit from the mains outlet.
6. Unplug the product from the mains outlet when it is not in use
or is left unattended.
HOW TO USE
WSFS1009BK_2 in 1 High Velocity 10 Stand Floor Fan_2L.indd 7 5/12/2019 18:25:19

8
EN
CLEANING AND CARE
WARNING: To avoid the risk of electric shock, always make sure
the product is unplugged from the mains outlet before cleaning
or servicing
1. The product should be cleaned and inspected on a regular
basis. Make sure the fan blade is clean at all times to prevent
damage and fading.
The fan can be cleaned in two ways:
a) Vacuum the fan blades or use a can of compressed air, or
b) Remove the front guard by removing the 6 screws securing
the grille to the fan (use a screwdriver with a magnetic tip).
2. To clean the front guard, turn counterclockwise to loosen the
screw and pull off the guard. To replace the front guard, align
the shaft with the inside groove on the guard and push inwards.
Screw the fastener on clockwise to tighten.
3. Take the guard off and wipe it with a cloth or use a can of
compressed air. Make sure the front guard is completely dry
before securing it back onto the fan.
4. Wipe the fan blades (do not remove) with a damp cloth dipped
in a light solution of water and mild detergent.
5. Make sure that water does not get into the motor while
cleaning.
6. The blade and rear guard (non-removable) must be completely
dry when the guard in place.
7. Do not use any chemical cleaners (e.g. acid or alcohol) to clean
the fan.
NOTE: This fan is not intended to be disassembled in order to
clean the internal parts (e.g. blade or motor). Disassembly may
damage the product. Never use liquids or abrasive cleaners to
clean the product.
WSFS1009BK_2 in 1 High Velocity 10 Stand Floor Fan_2L.indd 8 5/12/2019 18:25:19

9
EN
MAINTENANCE
WARNING: Do not attempt to open any part of the motor
housing, as this may cause an electric shock. This product has
been lubricated at the factory and does not require further
lubrication. Additional lubrication of electric motor parts could
create a re hazard.
1. The product must be placed in its original packaging and
stored in a room with low humidity.
2. Make sure the product is completely dry before use.
Note: If you experience a problem, please return the fan to the
retailer. Do not attempt to open the motor housing yourself, as
doing so may cause damage to the fan or personal injury.
DISPOSAL
Proper disposal of this product.
This symbol indicates that this appliance may not be treated
as household waste. Instead, it should be taken to the
appropriate collection point for recycling electrical and
electronic equipment.
Please use the return or collections services available in your
community or contact the retailer where you purchased this
product.
WSFS1009BK_2 in 1 High Velocity 10 Stand Floor Fan_2L.indd 9 5/12/2019 18:25:19

10
EN
INFORMATION AND SERVICE
If you have questions or concerns about your product, please visit
our website: www.westinghousehomeware.com, or contact our
overseas offices/agents.
In line with our policy of continuous product development,
we reserve the right to change the product, packaging and
documentation specifications without prior notice.
Model: WSFS1009BK
120VAC 60 Hz 72W
WSFS1009BK_2 in 1 High Velocity 10 Stand Floor Fan_2L.indd 10 5/12/2019 18:25:19