Westomatic Primo Compact User manual

INSTALLATION GUIDE
COMPACT
COMPACT

TECHNICAL INFORMATION
External Dimensions:
W300xD515xH600mm
Capacity Bean Hopper:
1x1200gr or 2x600gr
Capacity Instant Canisters:
1x2.3L or 2x1.6L
Noise Emission: <70dB
Weight: 38kg
The Primo Compact is designed
to process whole coffee beans,
powder that is suitable for
automatic machines and fresh
milk where a milk system is fitted:

Parts Included:
Primo Compact Machine
Drip Tray and Grid
Waste Bin (inside machine)
Cleaning Container
Power Cable
Westomatic Hose set
Grinder Wrench
Canister Labels
Keys
Safety Instructions
Check the contents:
NB: The machine will have been set up to your specifications and tested at Westomatic
HQ prior to install. All parts have been assembled on the machine. The QR code inside
the machine gives access to the We:Support pages with technical information.

Important:
Ensure genuine Westomatic
water hoses are used, fitted
with a water cut-off
Ensure the power supply has
a capacity of at least 2.5W.
Ensure the surface has a
capacity of at least 50kg
Water supply requirements:
Water Pressure: 0.2 - 1.0MPa
(2-8 Bar)
Westomatic strongly recommend
using a water filter to prevent
scale build up in the parts - if this
happens the warranty becomes
void.
Flow Rate: >1L/Min
Water Temperature: <25°C

Ensure the
protective
plastic is
removed from
the spalsh back
Once in place -
Level the machine
Min Clearances:
Rear: 50mm
Above:180mm
Connect water
filter to main
water - set filter
to hardness of
local area
Place grill into
drip tray
Connect water
filter to Primo -
ensure new
hoses are used
Slide drip tray
into machine

Place the cup tray
grill onto tray and
firmly push down
to clip into place
Connect Primo
to an earthed
power socket
Westomatic will
have taken your
set up
specifications and
attached labels
These
correspond
with the
ingredient
choice canisters
11
Switch the Primo
Compact on -
switch located
below instant
canisters
12
Machine is set
up and ready to
configure

INSTALL WASTE TO BASE DRAIN
The Primo Drain Hose WVS
PN:
A screw driver
Combination Pliers
There is the option to have
plumbed drainage from the drip
tray to waste water drain:
Required Items:
NB: The machine must be
situation within close proximity
of a waste water drain - and
there needs to be height
differential to ensure the water
flows freely into the drain.

Remove the drip
tray from the
machine
Use the
screwdriver to
punch the
perforated hole at
back of drip tray
open the drain
hose outlet on
the back pf the
Primo Compact
Connect the
drain hose...
Using the
combination
pliers...
to the drio tray
connection
under the
machine

Feed the drain
hose to the waste
water outlet
Refit the drip tray
and check for any
leaks - tighten
connections if
necessary
Machine is
ready to use

INSTALL MILK FRIDGE
External Dimensions Fridge:
W230xD420xH455mm
External Dimensions Total:
W530xD515xH600mm
Capacity Milk Fridge:
4litres/8pints fresh milk
Noise Emission: <70dB
Weight: 19kg (Total: 57kg)
The milk fridge is designed to
work in combination with the
Primo Compact:

Parts Included:
Milk Fridge
Power cable
Milk container with lid
2 x keys
Milk hose
Measuring Jug
Safety Instructions
OPTIONAL: Ingredient Box
PN: 1057339
Check the contents:
NB: The machine will have been set up to your specifications and tested at Westomatic
HQ prior to install. All parts have been assembled on the machine. The QR code inside
the machine gives access to the We:Support pages with technical information.

Clean milk fridge,
place hose in
milk container,
place in machine
and close door
Connect milk
hose to milk
output - feed
hose through
into fridge
Move fridge
into place next
to the Primo
Compact
Remove green
cover from the
nozzle on the
side of the
machine
Place the Fridge
on a level surface
Min Clearances:
Rear: 50mm
Ensure the
protective
plastic is
removed from
the top

Connect fridge to
a 230V mains
power socket -
ensure supply has
minimum 45W
Machine is ready
to use
Switch the Fridge
on using button
on the front

INSTALL CUP WARMER
External Dimensions Cup
Warmer:
W230xD420xH455mm
External Dimensions Total:
W530xD515xH600mm
Noise Emission: <70dB
Weight: 11kg (Total: 49kg)
The cup warmer is designed for
pre-heating coffee cups and
glasses used with the Primo
Compact:

Switch on and fill
with cups
(upside down)
Takes approx 60
mins to reach
temperature
Plug the cup
warmer into
the mains 230V
Plug socket
Place unit next
to the Primo
Compact - on a
flat and level
surface
Contents:
Cup Warmer
Power cable
Instructions
Ensure the
protective
plastic is
removed from
the top

W e s t o m a t i c V e n d i n g
S e r v i c e s L t d ,
U n i t s 7 - 8 F o r d e C o u r t ,
B l o c k 4 F o r d e R o a d ,
N e w t o n A b b o t ,
T Q 1 2 4 B T
+ 4 4 ( 0 ) 1 6 2 6 3 2 3 1 0 0
s a l e s @ w e s t o m a t i c . c o m
w w w . w e s t o m a t i c . c o m
C O N T A C T