Weston 24-0302 User manual

REV 012408
44 lb (20 kg) /110 lb (50 kg)
Stainless Steel
FLAT TOP SCALE
INSTRUCTIONS
44 lb MODEL #24-0302 110 lb MODEL #24-0401-W
ATTENTION
If any components of this unit are broken,
do not operate properly, or for product returns,
please contact Pragotrade Inc. at
1-800-814-4895
Outside the U.S. call 440-638-3131.
For the online catalog, log onto www.westonsupply.com.
Exclusively imported by Pragotrade Inc. Strongsville, Ohio
www.pragotrade.com

-2-
DIAGRAM PART 44 lb. 110 lb.
NUMBER DESCRIPTION PART NO. PART NO.
1 Plastic Face Plate 24-0303 24-0403
COMPONENT LIST
ASSEMBLY
INSTRUCTIONS
Before using the Flat Top Scale for the
rst time, you must attach the Platform
onto the top of the Scale.
1. Begin by removing the cardboard
support from the top of the Scale.
2. Attach the Platform to the top of the
Scale with the included Wing Nuts.
3. DO NOT over-tighten the Wing
Nuts to prevent damaging the
threads.
HOW TO ZERO
THE SCALE
After attaching the Platform to the
top of the Scale, the Pointer may not
indicate “0” weight. You will need to set
the Pointer to the “0” position for the
Scale to accurately indicate an object’s
weight.
To zero the Scale, rotate the Tare Dial
either clockwise or counter-clockwise
(depending on the direction in which
the Pointer is off) until the Pointer
indicates “0” weight.
The Platform is to be empty while
zeroing the Scale.
To ensure accurate wieght, make sure
the Pointer issetto“0”beforeweighing
an object.
To weigh objects in a container, place
an empty container on the Platform
then rotate the Tare Dial to zero
the Scale. The Scale will now only
indicate the weight of objects added to
the container.
6
44 lb. Model Shown
44 lb (20 kg) /110 lb (50 kg)
Stainless Steel
FLAT TOP SCALE
44 lb MODEL #24-0302
110 lb MODEL #24-0401-W
Wing Nuts Stainless Steel
Platform
Tare
Dial
Pointer
1
Plastic
Face Plate
Dial
-3-
WARRANTY INFORMATION
SAVE THIS WARRANTY INFORMATION FOR YOUR RECORDS!
Pragotrade Inc. warrants to the ORIGINAL RETAIL PURCHASER of this product that if operated in accordance
with the printed instruction accompanying it, then for a period of 1 year from the date of purchase, the product shall be
free from defects in material and workmanship.
The Warranty Card, along with a copy of the original receipt, must be received by Pragotrade Inc. within 30 days from
purchase date for the warranty to apply. Failure to send the completely lled out Warranty Card, along with a copy of
the original receipt, will void the warranty.
The product must be delivered to or shipped freight prepaid to Pragotrade Inc. for warranty services, in either its
original packaging or similar packaging affording an equal degree of protection. Damage due to shipping is not the
responsibility of the company. Pragotrade Inc. charges a $35.00 per hour bench charge. NOTE: No repairs will be
started without the authorization of the customer. The return shipping cost to the customer will be added to the repair
invoice.
Pragotrade Inc. will repair (or at its discretion, replace) the product free of charge, if in the judgment of the company,
it has been proven to be defective as to seller’s labor and material, within the warranty period.
New or rebuilt replacements for factory defective parts will be supplied for one (1) year from the date of purchase.
Replacement parts are warranted for the remainder of the original warranty period.
For non-warranty repairs, contact Pragotrade’s Customer Service at 1-800-814-4895 M-F 8am-5pm EST (outside of
the United States 440-638-3131) to obtain a Return Authorization Number (RMA Number). Pragotrade will refuse all
returns that do not contain this number. DO NOT RETURN THE UNIT WITHOUT PROPER AUTHORIZATION
FROM PRAGOTRADE INC.
LIMITATIONS: The warranty is void if the product is used for any purpose other than that for which it is designed.
The product must not have been previously altered, repaired, or serviced by anyone else other than Pragotrade Inc.
If applicable, the serial number must not have been altered or removed. The product must not have been subjected
to accident in transit or while in the customer’s possession, misused, abused, or operated contrary to the instructions
contained in the instruction manual. This includes failure caused by neglect of reasonable and necessary maintenance,
improper line voltage and acts of nature. This warranty is not transferable and applies only to U.S. and Canadian
sales.
Except to the extent prohibited by applicable law, no other warranties whether expressed or implied, including
warranty merchantability and tness for a particular purpose, shall apply to this product. Under no circumstances shall
Pragotrade Inc. be liable for consequential damages sustained in connection with said product and Pragotrade Inc.
neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other than
such as is expressly set forth herein. Any applicable implied warranties are also limited to the one (1) year period of
the limited warranty.
This warranty covers only the product and its specic parts, not the food or other products processed in it.
CUT ALONG THE DOTTED LINE AND SEND THE WARRANTY CARD ALONG WITH A
COPY OF YOUR ORIGINAL PURCHASE RECEIPT TO:
Pragotrade Inc.
20365 Progress Drive, Strongsville, OH 44149
WARRANTY CARD
SEND THIS CARD ALONG WITHACOPY OFYOUR ORIGINAL PURCHASE RECEIPT
Customer Name: ________________________________
Address: ______________________________________
City/State/Zip: ___________________________________
Telephone Number: (_________) ___________________
E-MailAddress:___________________________________
OriginalDateofPurchase:_______/_________/__________
ProductModel#:__________________________________
Serial # (if applicable): ____________________________
If any components of this unit are broken or the unit does not operate
properly, call Pragotrade Inc. Toll Free at
1-800-814-4895
Monday thru Friday 8:00am-5:00pm EST.
Outside the U.S. call 440-638-3131
TO CLEAN THE SCALE
Thoroughly wipe clean with a soft damp
clothandmilddetergent.Wipewithclear
water and dry immediately. DO NOT
IMMERSE THE SCALE IN WATER OR
LIQUIDS.