
IMPORTANT
PARTS
ASSEMBLY DISASSEMBLY
A
B C E
PARTS IDENTIFICATION:
A.
B.
C.
Read assembly instructions with care. When selecting a hunting site, make sure you find a flat area with good drainage free
from all sharp objects. This product is not fire proof, the fabric will burn if it comes into contact with an open flame or fuel
source, keep product away from direct flame. Protect your investment.
Hunting Blind ........(1)
Carry Bag ........(1)
Stakes ............... (4)
This product can expose you to chemicals including Diethylhexyl Phthalate,
which is known to the state of California to cause cancer, birth defects, or
other reproductive harm. For more info go to: www. P65Warnings.ca.gov
1
A
3
2
STEP 1: Unfold and spread the Hunting Blind out on
a clear hunting area. Remove all stones and sharp
objects.
STEP 2: Pull firmly on the web handle located on the
sides of the Hub. (Repeat for all 4 sides)
PULL
PULL
2
5 22
STEP 5: To disassemble,first detach and remove the
roof of the Hunting Blind. Firmly push in on the web
handle to correclty close the roof.
6
4
STEP 4: After the roof is fully assembled, attach the roof
to the top of the Hunting Blind by fastening the buckles
located on the corners of the roof and the corners of the Hub.
55
2
STEP 6: To take down the hub, push firmly on the
web handle located on the sides of the Hub.
(Repeat for all 4 sides)
PUSH
PUSH
6
STEP 3: Unfold and spread the separated roof out on a
clear hunting area. Then pull firmly on the web handle
located on the top of the roof.
5
STEP 7: Finally, neatly fold and close up the Hunting
Blind and place back into carry bag for safe keeping.
7