WFS 730 User manual

INSTRUCTION MANUAL
MODEL #:730
Double check the tent poles are secure in the eyelets.
All stakes are secured into the ground.
Rainfly is securely attached to rings.
Enjoy your new
World Famous Sports tent.
FINAL CHECK LIST
WORLDFAMOUSSPORTS.COM
[phone]
(833) WFS-1234
For any questions or concerns please call our toll free customer service line.

IMPORTANT
PARTS
ASSEMBLY
AB
C D E
PARTS IDENTIFICATION:
A.
B.
C.
D.
E.
Treat your tent seams with waterproofing. Set up your tent at home before your first camping trip. A dark campsite is no place
to learn how to assemble your WORLD FAMOUS SPORTS tent. Read assembly instructions with care. When selecting a
campsite, make sure you find a flat area with good drainage free from all sharp objects. Protect your investment.
Tent ........(1)
Rainfly ........(1)
Shock Corded Fiber Glass Poles..
(2 shorter/ 2 long poles)
Tent Stakes ........ (10)
Mudflap ........ (1)
This product can expose you to chemicals including Diethylhexyl Phthalate,
which is known to the state of California to cause cancer, birth defects, or
other reproductive harm. For more info go to: www. P65Warnings.ca.gov
1
3
2
STEP 1: Unfold and spread the tent out on clear
camp area. Remove all stones and sharp objects.
STEP 2: Assemble all shock corded poles by
unfolding and slipping shafts together.
STEP 3: Lay the two longer poles assemblies across the
tent to form an “X” across the tent. (If your tent comes with
sleeves, run the assembled pole sections through the
sleeves before attempting to erect the tent).
2
5 22
STEP 5: Fasten the tent clips to the pole assembly
for further security.
STEP 6: Tie the two arched pole assemblies together
with the ties at the top of the tent.
6
4
STEP 4: Insert the pin and ring attached on the corner
of the tent into the open metal furrule at the end of the
pole assembly, Repeat for all four corners. In repeating
the procedure, you have now formed two arches.
5
6
5 22
STEP 9: Securely insert tent Stake into the ground through the
small pin and ring on each corner of the tent and middle of bottom.
STEP 8: Each corner of the rainfly has a bungee cord with
plastic “S” hooks - Attach each “S” hook to tent’s pin and ring.
6
7
STEP 7: Insert the two shorter “Ridge Pole” assemblies
into the pockets of both sides of the rain fly cover. Executing
this step will form the poles into a “+” shape when complete.
Then spread the rainfly over the top of the tent.
89
Rainfly Assembly
8