Snugpak JOURNEY TRIO User manual

JOURNEY TRIO
THREE PERSON TENT
Assembly Instructions
x1 small Orange Tip
x2large Silver Tip
x14 Alloy Stakes
Lay the footprint down before
erecting the tent.
First unroll the inner shelter
and locate the pole bag and
separate the poles, clip the
sections together to make a
continuous pole, the poles are
held together by elastic to help.
Pole Placement
1. Clip the tent inner to the
Silver tipped pole with the
black plastic clips.
2.Clip the tent inner to the
other Silver tipped pole
with the black plastic
clips.
3.Insert the tent pole ends
into the grommets in the
corresponding webbing
straps.
4. Clip the two Silver tipped
poles together with the
Large clip on hook.
5. Once all the pole ends are
inserted into the grommets
then take the Ultralight
Alloy Stakes that came
with the Journey Trio and
stake down the corners
with the webbing straps.
Add additional stakes
to other stake points as
needed.
6. At this stage the Journey
Trio can be used as a stand
alone insect shelter, if so
desired.
5
5
1
3
4

JOURNEY TRIO
THREE PERSON TENT
Assembly Instructions
Snugpak LTD
Waterloo Mills, Howden Road
Silsden, West Yorkshire
BD20 0HA, England
Tel: [phone]
www.SNUGPAK.com
Snugpak®products are exclusively
distributed in North & South America by:
Proforce Equipment, Inc.
www.ProforceEquipment.com
www.SNUGPAKUSA.com
Take out the Fly (Outer Tent)and unfold and spread
it out. Then drape the Fly over the main body
matching up the door area and foot area and then
connect the two with the velcro loops.
Once the Inner Tent is connected with the Fly by
all the velcro loops, then click all the side
release buckles together
9. To gain access now simply unzip the fly access
zipper and also the inner tent access zippers.
10
. Once you are happy with set up of the tent you can
further stabilise the tent by pegging out the guy
lines, these are essential in windy conditions.
7
6
THIS TENT MEETS THE FLAMMABILITY REQUIREMENTS OF ISO6941 / (EN5912).
7
7.
8.