Whalen Furniture Better Homes & Gardens BHW-10032 User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2019-10-18 Rev. 0001-A
Granary Modern Farmhouse TV Console
Stock # BHW-10032 Rustic gray
BHW-10033 White
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our customer service number and have your instructions and
parts list ready to provide the model name, part name or factory number:
866-942-5362
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
www.whalenstyle.com
Or e-mail your request to [e-mail]
LOT NUMBER:
DATE PURCHASED: / /

2
MANUFACTURER: Whalen Furniture Manufacturing
CATALOG: Granary Modern Farmhouse TV Console
MODEL # BHW-10032 / BHW-10033
MADE IN VIETNAM
How to adjust the Euro-style adjustable hinges on doors
Shipping may cause doors to become out of alignment. If you find that the doors need to be
adjusted slightly, turn the appropriate screw as illustrated below.
1. TO ADJUST THE DOOR FORWARD OR BACKWARD.
2. TO ADJUST THE DOOR TO RIGHT OR TO LEFT.
3. TO ADJUST THE DOOR UP OR DOWN.
M A X I M U M R E C O M M E N D E D W E I G H T
L O
A D S
MAXIMUM LOAD 22.7 kg / 50 lb
FITS UP TO MOST 139.7 cm / 55”
DIAGONAL FLAT PANEL TVS
MAXIMUM LOAD 61.2 kg / 135 lb
PLACE TV BEHIND THE STOPPER
THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH FLAT
PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND WEIGHT LIMITS.
NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT PANEL TVS OR EQUIPMENT. TO
AVOID INSTABILITY, PLACE FLAT PANEL TV IN THE CENTER OF THE UNIT; THE BASE OF THE
TELEVISION MUST BE ABLE TO REST ON THE SUPPORTING SURFACE OF THE UNIT WITHOUT
OVER-HANGING THE EDGES. IMPROPERLY POSITIONED FLAT PANEL TVS, OR FLAT PANEL TVS
INCLUDING OTHER EQUIPMENT THAT EXCEED RECOMMENDED SIZE AND WEIGHT LIMITS
COULD FALL OFF OR BREAK THE UNIT, CAUSING POSSIBLE SERIOUS INJURY. FOR USE WITH
TELEVISIONS WEIGHING 135 LBS (61.2 KG) OR LESS. USE WITH HEAVIER TELEVISIONS MAY RESULT
IN INSTABILITY CAUSING TIP OVER RESULTING IN DEATH OR SERIOUS INJURY.
3

3
IMPORTANT
Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and
non-abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manuals.
NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED
OFF WITH DAMP CLOTH.
Insert the dowel at least half way by tapping lightly with a rubber mallet, IF NECESSARY.
CAM LOCK SYSTEM OPERATION
HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS
1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam
Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.
2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam
Lock faces out and points towards Cam Bolt.
3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.
4. Plug the Cam Lock Cover into the cross slot of the Cam Lock to conceal the Cam.
You are now ready to assemble the KD unit.
GLUE
XX
FINAL
1 2 43
1234

4
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
A- Top Panel (Qty. 1) B- Left Side Frame (Qty. 1) C- Right Side Frame (Qty. 1)
D- Left Fixed Shelf (Qty. 1) E- Right Fixed Shelf (Qty. 1) F- Bottom Panel (Qty. 1)
G- Partition Panel (Qty. 1) H- Partition Molding (Qty. 1) I- Top Front Stretcher (Qty. 1)
J- Bottom Front Stretcher (Qty. 1) K- Left Adjustable Shelf (Qty. 1) L- Right Adjustable Shelf(Qty. 1)
M- Left Door (Qty. 1) N- Right Door (Qty. 1) O- Upper Back Panel (Qty. 1)
P- Lower Back Panel (Qty. 1) Q- Support Foot (Qty. 1) R- Stop Rail (Qty. 1)

5
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
(1) Cam Lock (2) Cam Bolt (3) M8 x 30 mm Wood Dowel
(Qty. 27+1 extra) (Qty. 27+1 extra) (Qty. 28+1 extra)
(4) M4 x 50 mm Screw (5) M3 x 15 mm Screw (6) M3.5 x 15 mm Washer Head Screw
(Qty. 2+1 extra) (Qty. 4+1 extra) (Qty. 28+1 extra)
(7) Door Stopper (8) Shelf Pin (9) Cam Lock Cover
(Qty. 2) (Qty. 8+1 extra) (Qty. 17+1 extra)
(10) Handle (11) 5/32 x 16 mm Bolt (12) M4 x 38 mm Screw
(Qty. 8) (Qty. 16+1 extra) (Qty. 4+1 extra)
Glue Touch-up Pen Tipping Restraint Hardware Kit
(Qty. 1) (Qty. 1) (Qty.2)
(Only Used for BHW-10032) (Included in plastic bag)
Tools required(not provided): Phillips screwdriver, stud finder, tape measure, pencil, power drill and 1/8” drill
bit.

6
Assembly Instructions
1. Unpack the unit and confirm that you have all the hardware and required parts listed. Assemble the unit
on a carpeted floor or the empty carton to avoid any scratch.
2. Securely screw the Cam Bolts (2) into the designated small holes on the Top Panel (A), Left Side Frame
(B), Right Side Frame (C), Partition Molding (H) and Bottom Front Molding (J) using a Phillips
screwdriver.
② x 23
2
C
BH
J
A

7
Assembly Instructions
3. Securely screw two Cam Bolts (2) into the designated small holes on one face of Partition Panel (G).
4. Repeat the same procedure to screw another two Cam Bolts (2) on the other face of Partition Panel (G).
2
G
G
② x 4

8
Assembly Instructions
5. With the pilot holes as a guide, fasten one Door Stopper (7) to the Left Fixed Shelf (D) using two 15
mm Flat Head Screws (5).
6. Repeat the same procedure to attach the other Door Stopper (7) to the Right Fixed Shelf (E).
⑤ x 4
⑦ x 2
5
7
DE

9
Assembly Instructions
7. Glue two Wood Dowels (3) into the inner holes of the Partition Panel (G).
NOTE: It is very important to use a small amount of glue on both ends of dowels.
G
3
3
③ x 2

10
Assembly Instructions
8. Align and attach the Partition Molding (H) to the Partition Panel (G) by engaging three Cam Locks (1).
(Refer to page 3 on Cam Lock system operation supplement)
1G
H1
1
① x 3

11
Assembly Instructions
9. Glue the Wood Dowels (3) into the inner holes of the Bottom Panel (F), Partition Panel (G) and Bottom
Front Stretcher (J) as shown.
NOTE: DO NOT insert the wood dowels into the cam bolts holes.
③ x 12
3
3
3
3
3
3
3
3
3
3
G
F
3
3
J

12
Assembly Instructions
10. Using the wood dowels as a guide, firmly press the Partition Panel (G) to the Bottom Panel (F) and
fasten them in place with two 50 mm Screws (4). Fully tighten the screws with a Phillips screwdriver.
4
4
F
G
④ x 2

13
Assembly Instructions
11. Attach the Bottom Front Stretcher (J) to the Bottom Panel (F) with four Cam Locks (1).
G
F
J
1
1
1
1
① x 4

14
Assembly Instructions
12. Glue the Wood Dowels (3) into the inner holes of the Left Side Frame (B), Right Side Frame(C), Left
Fixed Shelf (D) and Right Fixed Shelf (E) as shown.
D
E
3
3
3
3
3
3
3
3
3
33
3
C
B
③ x 12

15
Assembly Instructions
13. Attach the Fixed Shelves (D and E) to the Partition Panel (G) by engaging two Cam Locks (1)
repectively.
D
E
F
G
1
1
1
1
① x 4

16
Assembly Instructions
14. Align and attach the Side Frames (B and C) to previous assembly with ten Cam Locks (1).
F
E
D
B
C
F
B/C
1
① x 10

17
Assembly Instructions
15. Glue two Wood Dowels (3) into the inner holes of the Top Front Stretcher (I) as shown.
3
3
I
③ x 2

18
Assembly Instructions
16. Fasten the Top Front Strethcer (I) to the Top Panel (A) with four 38 mm Screws (12).
⑫
x
4
12
12
12
A
I
12

19
Assembly Instructions
17. Place the Top Panel (A) onto the inserted Wood Dowels (3) on the vertical panels properly and fasten it
in place with six Cam Locks (1).
F
B
C
A
A
1
① x 6
G

20
Assembly Instructions
18. Securely screw the Support Foot (Q) into the threaded insert on the Bottom Panel (F) and set the floor
leveler to the correct height.
Q
F
B